2200-2400mm Digital Micrometer Caliper With Friction Ratchet, IP65, ISO 17025 Calibrated - Microtech Metrology
€3,990.00
Product information "2200-2400mm Digital Micrometer Caliper With Friction Ratchet, IP65, ISO 17025 Calibrated - Microtech Metrology"
Benefit from a combination of wide-range measurement capability, IP65-rated digital electronics and an ISO 17025 calibration certificate to ensure reliable, traceable measurements across large components; order the instrument directly via Metav Werkzeuge or consult our specialists for advice.
Microtech Metrology digital micrometer — Extra‑Long range with IP65 protection
Microtech Metrology digital micrometer for heavy‑duty workshop and production measurements in large assemblies
- Wide measurement range for large components
- IP65-rated digital head for workshop use
- Includes setting rods and ratchet stop
- Supplied with ISO 17025 calibration certificate
Accurate measurement over long spans for production control
This instrument is designed for reproducible assessment of large components, covering a measuring span of 2,200–2,400 mm classified as Extra‑Long. The substantial mass of the gauge (27 kg) and robust measuring faces Ø50 mm increase profile stiffness and decrease bending under load, resulting in stable readings across the full travel. For production and quality control environments where repeatability over metres matters, the construction reduces measurement uncertainty and simplifies alignment of large shafts, housings or fixtures.
Digital clarity and environmental robustness for workshop use
Equipped with a digital readout at 0.001 mm resolution and an IP65-rated measuring head, the instrument combines fine resolution with protection against dust and jets of water. The integrated ratchet stop and supplied setting rods help control measuring force and guarantee consistent contact pressure, lowering operator influence on results. The electronic display accelerates readout and data capture, while the rugged sealing allows use in common shop-floor conditions without compromising instrument lifetime.
Traceable calibration and measurable confidence in QA workflows
Delivered with an ISO 17025 calibration certificate, the device supports formal traceability and audit requirements; the included certificate documents measurement performance and enables direct integration into quality management systems. The declared accuracy of 0.045 mm establishes the instrument's suitability for end‑of‑line checks and component verification. As a digital, wide‑range measuring tool from Microtech Metrology, it bridges the gap between laboratory traceability and on‑shop practicality, reducing rework and inspection bottlenecks.
For precision over very long measuring ranges, request a specification review or place an order with Metav Werkzeuge — Metav Werkzeuge provides product advice and supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com
Technical data
- SKU: 110172401
- GTIN: 4061905039447
- Manufacturer: Microtech Metrology
- Weight: 27 kg
- IP rating: IP65
- Resolution: 0.001 mm
- Accuracy: 0.045 mm
- Measuring faces: Ø50 mm
Facts
- Measuring range: 2,200–2,400 mm
- Resolution (display): 0.001 mm
- Declared accuracy: 0.045 mm
- Mass: 27 kg
Special features
- Digital display
- Ratchet stop
- Setting rods included
- Supplied with ISO 17025 calibration certificate
- IP65 protection
- Wide‑range micrometer for large components
FAQ
What measuring range does this micrometer cover?
The Microtech Metrology digital micrometer covers a measuring span of 2,200–2,400 mm and is intended for extra‑long measurement tasks (SKU 110172401).
Is the device suitable for shop‑floor use?
Yes, the instrument features an IP65‑rated digital head and robust measuring faces, making the micrometer suitable for typical workshop environments.
Does the micrometer come calibrated?
A calibration certificate is supplied; the micrometer is delivered with an ISO 17025 calibration certificate confirming traceable verification.
What resolution and declared accuracy can be expected?
The digital readout provides 0.001 mm resolution and a declared accuracy of 0.045 mm for the specified measuring range.
Are any accessories included for installation or setup?
Setting rods and a ratchet stop are included to assist correct measuring force and initial adjustment of the micrometer.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools