2400-2600mm Digital Outside Micrometer With Ø50mm Anvils, IP65, ISO 17025 Calibration Certificate - Microtech Metrology
€4,500.00
Product information "2400-2600mm Digital Outside Micrometer With Ø50mm Anvils, IP65, ISO 17025 Calibration Certificate - Microtech Metrology"
Take advantage of the combination of an extra‑long 2400–2600 mm measuring range, robust IP65 digital head, and an ISO 17025 calibration certificate for reliable large‑part inspection and reproducible results on the shop floor. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice.
Outside Micrometer 2400–2600 mm — Digital IP65 micrometer by Microtech Metrology
An outside micrometer designed for extra‑long measurement tasks in heavy‑duty metrology, combining a sealed digital head with ratchet stop and a delivered ISO 17025 calibration certificate.
- Extra‑long range 2400–2600 mm
- Digital head with IP65 protection
- Delivered with ISO 17025 calibration
- Ø50 mm hardened measuring faces
Robust design for large components and repeatable results
The instrument is built for measurement tasks where span and stability are critical: the 2400–2600 mm range places it in the extra‑long class for large assemblies, pipes and heavy‑duty fixtures. A massive frame and substantial mass (approximately 28.5 kg) reduce flex under load and support reproducible readings across the full span, lowering rework and inspection time. The sizeable Ø50 mm measuring faces spread contact pressure and improve seating on curved or irregular surfaces, translating the mechanical robustness into consistent practical outcomes for production environments.
Sealed digital head and controlled measuring force for accuracy
A sealed digital head with IP65 protection keeps the electronics safe from coolant and dust, ensuring longevity in workshop conditions. The display resolution of 0.001 mm together with a ratchet stop defines a controlled measuring force, reducing operator variation and improving repeatability; the specified accuracy of ±0.05 mm provides a clear expectation for tolerance checks. These technical choices mean faster decision cycles during incoming inspection and clear traceability of measurement performance in quality documentation.
Traceable calibration and delivered inspection readiness
The micrometer is supplied fully calibrated with an ISO 17025 calibration certificate (Ilac MRA), which assures traceability and acceptance in regulated quality systems. Delivered with setting rods included, the gauge arrives ready for immediate use and integration into existing inspection procedures. This certification reduces administrative effort when proving measurement capability to auditors and customers, reinforcing confidence in measurement results from first use.
Practical handling and workshop integration
Despite its extra‑long capability, the instrument is designed for pragmatic workshop use: the ratchet stop provides consistent contact torque, setting rods allow quick field adjustment, and the digital readout speeds measurement logging. The instrument’s weight and dimensions recommend two‑person handling during transport and setup; once mounted, however, its mechanical stiffness and sealed electronics make it an ideal solution for repeated checks on large turned parts, housings and pipeline components. For demanding applications, the combination of ruggedness and digital precision supports leaner inspection workflows and fewer measurement disputes.
For traceable, large‑format measurement solutions, contact Metav Werkzeuge in Emmerich to confirm availability of the Microtech Metrology extra‑long digital micrometer and receive specialist advice for workshop integration.
Technical Data
- Article number: 110172601
- GTIN: 4061905039454
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 2400–2600 mm
- Maximum measuring range classification: Extra‑Long
- Measuring faces: Ø50 mm
- Resolution: 0.001 mm
- Specified accuracy: ±0.05 mm
- Weight: 28.5 kg
- Protection class: IP65
Special features
- Digital measuring head
- Ratchet stop for controlled measuring force
- Setting rods included
- Delivered fully calibrated with ISO 17025 certificate
- Designed for large‑part, heavy‑duty measurement
FAQ
Is the micrometer delivered calibrated and traceable? Yes. The outside micrometer is supplied fully calibrated and includes an ISO 17025 calibration certificate for direct use in traceability chains and quality audits.
What environmental conditions can the digital head withstand? The digital head is rated IP65, meaning it is protected against dust ingress and water jets, suitable for typical workshop environments where coolant or fine debris may be present.
What accuracy and resolution can be expected for long‑span measurements? The instrument offers a display resolution of 0.001 mm and a specified accuracy of ±0.05 mm, providing clear limits for tolerance verification on large components.
Are accessories included to set up the gauge? Yes. Setting rods are included to assist with reference adjustments and setup for field calibration and on‑site checks prior to inspection runs.
Is the micrometer suitable for curved or uneven surfaces? The large Ø50 mm measuring faces distribute contact forces and improve seating on curved surfaces, making the gauge well suited for pipes, housings and rounded features.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools