2800-3000mm Digital Micrometer Frame With IP65 Protection, ISO 17025 Calibration Certificate - Microtech Metrology
€4,900.00
Product information "2800-3000mm Digital Micrometer Frame With IP65 Protection, ISO 17025 Calibration Certificate - Microtech Metrology"
Take advantage of the combination of an extra‑long measuring range, a robust IP65 digital head and full ISO 17025 calibration, ensuring reproducible, traceable measurements for large components; order directly via Metav Werkzeuge or consult the specialists for application support.
Outside micrometer — Digital IP65 head by Microtech Metrology, extra‑long range
Outside micrometer for precise external measurements of large workpieces in heavy machining, inspection and toolmaking environments.
- Extra‑long 2,800–3,000 mm measuring range
- IP65 digital micrometer head for workshop use
- ISO 17025 calibration certificate included
- Large Ø50 mm measuring faces and ratchet control
Engineered for extra‑long measurements with repeatability
The instrument is built as an extra‑long range measuring device, covering 2,800–3,000 mm, which places it in the class for very large components where single‑piece measurement is required. The extended span reduces the need for piecewise measurement and alignment operations, helping to shorten inspection cycles. Large contact surfaces distribute pressure over the part, so the Ø50 mm measuring faces minimise local deformation and contribute to reproducible results during serial inspections.
Rugged digital head designed for harsh workshop conditions
Equipped with a digital micrometer head rated IP65, the measuring system resists coolant, dust and general workshop contamination while keeping the display and electronics protected. The sealed head and industrial display enable straightforward readout and reduce transcription errors. A fine friction ratchet provides a consistent measuring force, improving repeatability, and the inclusion of setting rods simplifies calibration and setup on-site, making the device practical for production environments.
Factory traceability and accredited calibration for confident decision‑making
This micrometer is delivered with an ISO 17025 calibration certificate (Ilac MRA), supplying documented traceability to national standards. The accredited certificate supports internal quality records and audit trails, helping to meet supplier qualification and inspection requirements. Formal calibration together with the specified accuracy ±0.06 mm gives a verifiable baseline for tolerance checks on large assemblies and reduces uncertainty in acceptance testing.
Practical handling and measurement performance for workshop productivity
Although substantial in size, the instrument is configured to be manageable in workshop workflows: robust construction balances stiffness and handling, and the digital readout (resolution 0.001 mm) speeds measurement tasks and reduces operator interpretation. The combination of a sealed head, ratchet control and generous measuring faces reduces rework caused by measurement variability and supports a consistent production flow, particularly in heavy machining, presswork and large‑part assembly contexts.
Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology outside micrometer into existing inspection processes; specialists are available in Emmerich for delivery and documentation details via info@metav-werkzeuge.com or +49 2822 7131930
Technical data
- Article number: 110173101
- GTIN: 4061905039478
- Manufacturer: Microtech Metrology
- IP protection: IP65
- Digital: yes
- Calibration: ISO 17025 (Ilac MRA) certificate included
Measurements
- Measuring range: 2,800–3,000 mm
- Measuring faces: Ø50 mm
- Resolution (display): 0.001 mm
- Accuracy: ±0.06 mm
- Weight: 33 kg
Design & special features
- Digital micrometer head, sealed to IP65
- Friction ratchet for reproducible measuring force
- Setting rods included for adjustment
- ISO 17025 calibration certificate supplied
- Robust construction for large‑part inspection
FAQ
What types of components is this micrometer suited for?
The outside micrometer from Microtech Metrology is intended for large external dimensions such as heavy housings, large shafts and pressings where a single, continuous measurement across 2,800–3,000 mm improves traceability and reduces alignment effort.
How accurate and precise is the measurement result?
Typical accuracy is specified as ±0.06 mm with a digital readout resolution of 0.001 mm; the built‑in ratchet and large measuring faces support precise, repeatable contact conditions for consistent results.
Is the instrument ready for use upon delivery?
Yes. The micrometer is supplied with setting rods and an ISO 17025 calibration certificate, providing documented traceability and immediate suitability for quality control tasks.
Can the micrometer be used in coolant or dusty environments?
The digital head is rated IP65, so the display and electronics are protected against dust and low‑pressure water jets, making the tool suitable for typical workshop conditions.
Which SKU identifies this product for ordering and documentation?
The micrometer is stocked as SKU 110173101 and can be referenced in purchase orders and calibration records.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools