300-400mm Digital Outside Micrometer With Ratchet Stop, IP65, ISO17025 Calibration Certificate - Microtech Metrology
€699.00
Product information "300-400mm Digital Outside Micrometer With Ratchet Stop, IP65, ISO17025 Calibration Certificate - Microtech Metrology"
Take advantage of a wide 300–400 mm measuring range, combined with a digital readout (0.001 mm) and IP65 protection for dependable workshop performance; the instrument is delivered fully calibrated to ISO 17025 with setting rods and a ratchet stop for reproducible contact force. Order directly via Metav Werkzeuge or consult our specialists for application advice.
Outside micrometer – Digital 300–400 mm measuring range, IP65, ISO 17025
The Outside micrometer is a robust digital micrometer with ratchet stop, designed for precise external measurements of medium‑sized components in workshop, toolroom and inspection environments.
- Large 300–400 mm measuring range
- IP65 dust and water protection
- ISO 17025 calibration certificate included
- Ratchet stop for repeatable measuring force
Reliable accuracy for production control
Built for repeatable, measurable results, this digital instrument provides a resolution of 0.001 mm and a stated accuracy of ±0.007 mm, enabling tight tolerance checks in series production and final inspection. The clear electronic display reduces reading errors compared with analogue gauges, while the ratchet stop ensures consistent contact force for each measurement—this combination reduces process variation and increases throughput by avoiding rework and downstream rejects. The device is therefore a practical solution where traceable measurement data and reproducibility matter most.
Designed to withstand workshop conditions
With an IP65 rating and robust measuring faces of Ø25 mm, the micrometer tolerates coolant splash and fine dust typical for machining environments, extending instrument life and lowering maintenance demands. The construction and balanced weight offer good handling for single‑operator use across benches or inside fixtures. These qualities make the tool suitable for machine shops, jigs and fixture manufacturing, and quality departments that require an instrument able to keep up with daily use without frequent service interruptions.
Certified calibration and handling convenience
Delivered with a calibration certificate issued to ISO 17025, the instrument arrives ready for use in accredited processes and internal quality systems; the certificate documents traceability and conformity to recognised standards. Included setting rods simplify verification and routine checks, while the ratchet mechanism prevents overtightening and helps protect both the spindle and workpiece. Together, these features lower the administrative burden of initial acceptance and support faster integration into quality control workflows.
Application range and practical benefits
Classified as medium in measuring scope (measuring range 300–500 mm category), the tool is ideal for medium‑sized assemblies such as housings, shafts and clamping fixtures where reach and stiffness must be balanced. The digital readout and rugged sealing make it suited to production floors as well as metrology benches, and the instrument’s specification supports tasks from incoming inspection to in‑process checks. For operations aiming to democratise precision across multiple workstations, this micrometer offers traceable accuracy without the complexity of high‑end laboratory devices.
Contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich — request the Microtech Metrology outside micrometer (SKU 110174001) with ISO 17025 calibration for immediate integration into production.
Technical data
- Article number: 110174001
- GTIN: 4061905039270
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 300–400 mm
- Measuring faces: Ø25 mm
- Resolution: 0.001 mm
- Accuracy: ±0.007 mm
- Weight: 1.9 kg
Special features
- IP65 protection class
- Digital readout, battery powered
- Ratchet stop (friction ratchet)
- Setting rods included
- Delivered with ISO 17025 calibration certificate
FAQ
How accurate is the micrometer for workshop inspection?
The outside micrometer from Microtech Metrology provides a resolution of 0.001 mm and a stated accuracy of ±0.007 mm, suitable for precise workshop and production checks.
Is the instrument supplied calibrated and traceable?
Yes — the micrometer is delivered with a calibration certificate issued to ISO 17025, confirming traceability and suitability for accredited quality systems.
Can the micrometer be used in environments with coolant or dust?
The device has an IP65 rating, which protects the electronics against dust ingress and low‑pressure water jets, making it resilient in typical machining environments.
What ensures repeatable contact force during measurement?
A built‑in ratchet stop (friction ratchet) provides consistent measuring force, reducing operator influence and helping to achieve repeatable readings with the micrometer.
What measuring range and applications suit this instrument best?
With a measuring range of 300–400 mm, the instrument fits the medium category for components such as housings, shafts and fixtures, balancing reach and stiffness for general workshop use.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools