400-500mm Digital Micrometer Caliper With Ø25mm Measuring Faces, ISO 17025 Calibration, IP65 - Microtech Metrology
€779.00
Product information "400-500mm Digital Micrometer Caliper With Ø25mm Measuring Faces, ISO 17025 Calibration, IP65 - Microtech Metrology"
Benefit from precise, traceable measurements thanks to the combination of a wide 400–500 mm range, 0.007 mm accuracy and IP65 protection for reliable shopfloor use; the tool arrives with an ISO 17025 calibration certificate for immediate use in quality assurance. Order the micrometer directly via Metav Werkzeuge or contact our consultants for application support.
CertiMet digital outside micrometer 400–500 mm (IP65) — Microtech Metrology
The CertiMet digital outside micrometer 400–500 mm is a rugged, shopfloor‑grade instrument designed for precise external measurements on large components in production and inspection.
- Robust digital IP65 protection
- Extensive 400–500 mm measuring range
- Calibration certificate ISO 17025 included
- Friction ratchet and Ø25 mm measuring faces
Measure large components with laboratory‑level resolution
The digital measuring system delivers a reading resolution of 0.001 mm, paired with a guaranteed accuracy of ±0.007 mm, which reduces uncertainty in process control and limits rework. Such performance makes this micrometer suitable where reproducible external measurements influence assembly fits, runout checks or final inspection reports. The high display resolution shortens measurement cycles by making increments immediately visible, improving throughput without sacrificing traceability.
Built to withstand production environments
Equipped with an IP65‑rated micrometer head and Ø25 mm measuring faces, the instrument resists coolant spray and fine dust typical of machining centres. The integrated friction ratchet ensures consistent measuring force across repeated checks, lowering operator influence on results. With a robust frame and a mass of 2.2 kg, the unit offers stable handling for measurements across its large span while remaining portable enough for bench or on‑machine inspection.
Traceable calibration for audit‑ready results
The tool is supplied with a full ISO 17025 calibration certificate, confirming laboratory calibration and traceability for quality management systems. This documentation supports vendor assessments and internal audits by linking each measurement to national standards, eliminating the need for immediate external calibration before production use. The inclusion of setting rods facilitates quick verification and reassessment on site.
Practical handling and application benefits
Covering the broad 400–500 mm range, the instrument suits shafts, housings and fixtures that exceed hand micrometer span yet still require a compact measuring solution. The digital display simplifies reading in dim workshop conditions and speeds up log entry for quality records. Large measuring faces and a stable frame reduce deformation on contact points, improving repeatability for assemblies where tight tolerances are critical.
Contact Metav Werkzeuge in Emmerich to specify the Microtech Metrology CertiMet digital outside micrometer (SKU 110175001) for production or inspection tasks; our consultants will advise on integration, calibration scope and delivery from the local warehouse.
Technical Data
- Article number: 110175001
- GTIN: 4061905040115
- Manufacturer: Microtech Metrology
- Product: outside micrometer
Facts
- Measuring range: 400–500 mm
- Resolution: 0.001 mm
- Accuracy: ±0.007 mm
- Measuring faces: Ø25 mm
- Weight: 2.2 kg
- Protection class: IP 65
Special features
- ISO 17025 calibration certificate included
- Friction ratchet
- Setting rods included
- Digital readout
- Wide‑range micrometer head
FAQ
Is the micrometer delivered calibrated?
Yes. The CertiMet digital outside micrometer from Microtech Metrology is supplied with an ISO 17025 calibration certificate, ensuring traceable results and suitability for audit‑grade quality processes (SKU 110175001).
What accuracy and resolution can be expected?
Resolution is 0.001 mm with a specified accuracy of ±0.007 mm, values that make the instrument suitable for tight tolerance checks and repeatable inspection tasks.
How robust is the instrument for workshop use?
The device features an IP65 rating and robust measuring faces, designed to withstand coolant spray and fine dust, making it appropriate for the production floor.
Which component sizes are suitable for this micrometer?
With a 400–500 mm measuring range and large Ø25 mm faces, the micrometer is intended for shafts, housings and fixtures that exceed the span of standard hand micrometers.
Are there aids for daily verification and setup?
Yes. The delivery includes setting rods for quick verification; the friction ratchet helps maintain consistent measuring force during repetitive checks.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools