700-800mm Digital Micrometer Caliper With IP65, Large Anvil Ø25mm, ISO 17025 Calibrated - Microtech Metrology
€1,120.00
Product information "700-800mm Digital Micrometer Caliper With IP65, Large Anvil Ø25mm, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of a large-range, high-precision measuring solution that is IP65-protected and supplied with an ISO 17025 calibration certificate for immediate use in production; order directly via Metav Werkzeuge or contact our specialists for tailored advice.
Outside micrometer 110178001 – Digital micrometer, 700–800 mm, IP65
The Outside micrometer 110178001 is a digital, large-range measuring instrument engineered for heavy machining, fixture construction and large-component quality control.
- Large range 700–800 mm
- IP65-rated digital head
- ISO 17025 calibration certificate included
Accurate measurement for large components
Built for the large-range class (500–1,000 mm), this digital micrometer offers a measuring span that bridges bench tools and long-track systems, providing a practical reach for sizeable parts while remaining manageable in the workshop. The instrument delivers a resolution of 0.001 mm and a specified accuracy of ±0.015 mm, values that allow reliable part verification across production batches. The Ø25 mm measuring faces ensure stable contact with the workpiece and reduce local deformation risk, while the overall 4.8 kg weight reflects the robust frame necessary for repeatable results at this scale.
Robust digital design for continuous workshop use
The digital micrometer head is protected to IP65, safeguarding electronics against coolants and particulate ingress common in machining environments. The readable display simplifies transfer of measured values and reduces reading errors compared with analogue alternatives. A built-in friction ratchet secures consistent measuring force for repeatability, and setting rods are included to facilitate periodic verification and zeroing. These design choices combine to lower measurement variability and shorten inspection cycles, delivering clear efficiency gains on the shop floor.
Calibrated, traceable and production-ready
This micrometer is supplied fully calibrated with an ISO 17025 calibration certificate, granting traceable acceptance for quality systems and audit requirements. The calibration means the instrument can be integrated into control plans immediately, with documented uncertainty matching the stated accuracy. The digital output and rugged housing further support automated data recording or manual entry into inspection logs, making the micrometer suitable for both standalone checks and as part of a documented measurement workflow.
For precision measurement solutions from Microtech Metrology, contact Metav Werkzeuge for expert guidance and direct delivery from our Emmerich site.
Technical data
- Article number: 110178001
- GTIN: 4061905040245
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 700–800 mm
- Resolution (reading): 0.001 mm
- Accuracy: ±0.015 mm
- Measuring faces: Ø25 mm
- Weight: 4.8 kg
Special features
- Digital micrometer head
- IP65 protection
- ISO 17025 calibration certificate included
- Friction ratchet for repeatable force
- Setting rods included
- Large-range class (500–1,000 mm)
FAQ
What measuring range does the micrometer cover?
The micrometer covers a measuring range from 700 to 800 mm, classed in the large-range (500–1,000 mm) category for sizeable components.
Is the instrument supplied calibrated?
Yes, the micrometer is delivered with an ISO 17025 calibration certificate, ensuring traceable results suitable for production and audit documentation.
Does the micrometer tolerate workshop conditions?
The digital head is IP65-rated, providing protection against dust and low-pressure water jets, which makes the device resilient in typical machining environments.
Are setting tools provided for verification?
Setting rods are included with the micrometer to simplify zeroing and periodic checks on-site.
What accuracy and resolution can be expected in daily use?
Expect a resolution of 0.001 mm with a stated accuracy of ±0.015 mm, supporting precise dimensional control for large parts.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools