25-50mm Tube Wall Thickness Digital Micrometer Three-Point, 0.001mm Resolution, IP65, ISO17025 Cal Cert - Microtech Metrology
€299.00
Product information "25-50mm Tube Wall Thickness Digital Micrometer Three-Point, 0.001mm Resolution, IP65, ISO17025 Cal Cert - Microtech Metrology"
Combine ISO 17025 traceable calibration with robust IP65 protection and micrometre-class resolution (0.001 mm) for dependable tube wall inspection; secure the CertiMet TUBE through Metav Werkzeuge or consult our specialists for customised anvils and application advice.
CertiMet TUBE Digital Tube Wall Thickness Micrometer — IP65, ISO 17025-calibrated (Microtech Metrology)
The CertiMet TUBE Digital Tube Wall Thickness Micrometer is a rugged, IP65-rated digital micrometer designed for accurate thickness measurement of tube walls in production, inspection and laboratory environments.
- CertiMet TUBE digital with IP65 protection
- Friction thimble for constant measuring force
- Resolution 0.001 mm, accuracy ±0.003 mm
- ISO 17025 calibration certificate included
Dependable measurement performance for production control
The instrument delivers sub-micron resolution and a tight accuracy specification, making it suitable where repeatable, verifiable thickness data is required. The digital readout operates in mm/inch and includes origin and hold functions to streamline repetitive measurements; these features reduce manual transcription errors and support routine quality control. With a resolution of 0.001 mm and an accuracy of ±0.003 mm, the tool provides measurement certainty for traceable inspection tasks and statistical process control.
Built for harsh shop-floor conditions and consistent handling
Protected by an aluminium housing and rated IP65, the micrometer tolerates dust ingress and low-pressure water jets, enabling use close to coolant or wash-down areas without compromising electronics. The integrated friction thimble provides a reproducible measuring force, while the rotating spindle minimises wear and improves service life. Together these design choices lower operator-induced variance and maintain instrument reliability during high-throughput checks.
Calibrated traceability and application flexibility
The micrometer is supplied fully calibrated with an ISO 17025 calibration certificate (Ilac MRA), supporting compliance and audit requirements in regulated environments. The measuring range of 25–50 mm suits tubular components and fixtures, and the device is specified for tube wall thickness measurements from 4.7 mm upwards. A custom tube anvil can be provided on request to adapt the contact geometry for unusual profiles, enabling tailored inspection of specialised tubes and sleeves while preserving measurement integrity.
Speak to Metav Werkzeuge for tailored anvils, application guidance and to arrange supply of the CertiMet TUBE through our Emmerich distribution and consulting team
Technical data
- SKU: 110350501
- GTIN: 4061905040542
- Manufacturer: Microtech Metrology
- ECLASS: 27200302
- IP protection: IP 65
Specifications
- Measuring range: 25–50 mm
- Resolution: 0.001 mm
- Accuracy: ±0.003 mm
- Display: Digital, mm/inch selection
- Measuring spindle: rotating
Features
- Friction thimble micrometer head
- Aluminium housing
- Functions: origin, hold, mm/inch
- Calibration certificate: ISO 17025 (Ilac MRA) included
- Custom tube anvil on request
- Suitable for tube wall thickness measurements from 4.7 mm
FAQ
Is the micrometer delivered calibrated?
Yes. The CertiMet TUBE is supplied fully calibrated and includes an ISO 17025 calibration certificate (Ilac MRA) for traceable inspection records.
What measuring range and thicknesses can be inspected?
The instrument covers a measuring range of 25–50 mm and is specified for tube wall thickness measurements from approximately 4.7 mm upwards.
What resolution and accuracy does the micrometer provide?
The digital micrometer offers a resolution of 0.001 mm and an accuracy of ±0.003 mm, suitable for precise production and laboratory checks.
Can the instrument be used near coolants or in dusty environments?
Yes. The aluminium housing with IP65 protection resists dust ingress and low-pressure water jets, making it suitable for workshop and near-process inspection.
Is it possible to adapt the contact geometry for special tubes?
A custom tube anvil can be supplied on request to match non-standard profiles while maintaining the instrument’s measurement performance.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools