25mm Digital Micrometer With Ball Tip Measuring Faces, IP65, ISO17025 Calibration Certificate - Microtech Metrology
€219.00
Product information "25mm Digital Micrometer With Ball Tip Measuring Faces, IP65, ISO17025 Calibration Certificate - Microtech Metrology"
Take precise measurements of small components with a reliable digital readout, 0–25 mm measuring range and robust IP65 protection — ideal for workshop quality control. Order the micrometer directly via Metav Werkzeuge or ask our consultants if needed.
Microtech Metrology Digital Micrometer with Spherical Measuring Faces, IP65
A digital micrometer with spherical measuring faces designed for accurate external and small-part measurement in workshops and inspection benches
- IP65 aluminium housing for dusty and wet environments
- Friction thimble ensures consistent measuring force
- Calibration certificate included
Precision tailored to small parts and fine mechanics
This measuring instrument belongs to the Micro class for compact micrometres and covers a 0–25 mm range with a reading resolution of 0.001 mm and an accuracy of 0.003 mm. Such specifications make it suitable for routine shop-floor inspections and fine mechanical work where reproducible results matter. The combination of fine resolution and measured accuracy reduces uncertainty in pass/fail decisions and supports reliable trend monitoring during in-process control.
Built to withstand workshop conditions
The micrometer features an aluminium housing with IP65 protection, shielding the electronics from coolant spray and chips while remaining lightweight for handheld use. Spherical measuring faces are fitted to accommodate curved and rounded surfaces without inducing edge damage, and the friction thimble stabilises the applied measuring force so readings are repeatable even during frequent measurements. These design choices lower rework rates and prolong instrument service life in demanding environments.
Clear digital interface for efficient measuring routines
A bright digital display provides immediate readings and includes function keys for mm/inch, origin, HOLD and UNIT selection, streamlining typical inspection tasks. The instrument’s controls allow quick switching between metric and imperial units and temporary display freezing for awkward measuring positions. Combined with the friction thimble, this improves throughput by reducing the time required per measurement while keeping operator influence on values minimal.
Traceability and suitability for quality assurance
The micrometer is supplied with a calibration certificate, ensuring documented traceability for quality systems and internal audits. Its compact range and high resolution make it a practical choice for toolrooms, assembly inspection, and precision maintenance tasks where documented measurement results are required. The robust protection and repeatable measuring force also support use in production-adjacent inspection stations where instruments face regular handling and exposure.
For a precise recommendation tailored to specific inspection needs, contact Metav Werkzeuge — our specialists can advise on integrating this Microtech Metrology digital micrometer into existing quality processes and supply related tools and accessories
Technical data
- Article number: 110360251
- GTIN: 4061905458385
- Brand: Microtech Metrology
- Type: Digital micrometer with spherical measuring faces
Facts
- Measuring range: 0–25 mm
- Resolution (reading): 0.001 mm
- Accuracy: 0.003 mm
- Protection class: IP65
- Digital: yes
Special features
- Spherical measuring faces
- Friction thimble micrometer head
- Aluminium housing
- Digital display with 0/MODE, SET, UNIT and HOLD buttons
- Functions: mm/inch, origin, hold
- Calibration certificate included
FAQ
What measuring range does this micrometer cover?
The micrometer measures from 0 to 25 mm, making it suitable for small components and precision shop‑floor checks with the Microtech Metrology digital micrometer (SKU 110360251).
How fine is the resolution and what accuracy can be expected?
The instrument offers a resolution of 0.001 mm and an accuracy of 0.003 mm, which supports reliable measurements for quality control and fine mechanical applications.
Are the measuring faces suitable for curved surfaces?
Yes, the spherical measuring faces are designed for reliable contact with rounded and shaft‑type surfaces without causing damage to the workpiece.
Is the micrometer protected against coolant and dust?
The aluminium housing is rated IP65, providing protection against dust ingress and low-pressure water jets typical in workshop environments.
Does the display support unit conversion?
The digital display features mm/inch switching and dedicated function keys (UNIT, HOLD, MODE), allowing quick conversion and convenient measurement workflows.
Is traceable calibration supplied with the instrument?
A calibration certificate is included with the micrometer to document measurement traceability for use in quality assurance and audit processes.
Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools