25-50mm Digital Ball-Point Micrometer Friction Thimble, mm/inch/Origin/Hold, IP65, ISO 17025 Cal Cert - Microtech Metrology
€249.00
Product information "25-50mm Digital Ball-Point Micrometer Friction Thimble, mm/inch/Origin/Hold, IP65, ISO 17025 Cal Cert - Microtech Metrology"
Take advantage of a robust combination of IP65 protection, a friction thimble for consistent measuring force and a traceable ISO 17025 calibration certificate for reliable quality assurance. Order the instrument directly via Metav Werkzeuge or contact our consultants for technical advice.
CertiMet DOUBLE SPHERICAL digital micrometer — Microtech Metrology (digital, IP65, 25–50 mm)
The CertiMet DOUBLE SPHERICAL digital micrometer is a rugged, workshop‑grade instrument for precise external measurements of shafts and cylindrical parts, providing repeatable results in demanding production and inspection environments.
- IP65-rated aluminium housing
- Friction thimble for consistent measuring force
- mm/inch conversion and hold function
- ISO 17025 calibration certificate included
Reliable sub‑micrometre resolution for repeatable quality
The instrument delivers a resolution of 0.001 mm and a specified accuracy of ±0.003 mm, which enables tight control of external diameters within the 25–50 mm working range. The friction thimble stabilises contact force during measurement, reducing variability caused by hand pressure and improving reproducibility across repeated checks. For production and inspection tasks this means fewer rejects and clearer pass/fail decisions based on measurable tolerances rather than estimations.
Built to withstand workshop conditions and handle curved surfaces
An aluminium housing with IP65 protection safeguards the electronics against coolant, chips and dust, allowing the device to be used close to machining centres without risk to the electronics. Double spherical measuring faces ensure reliable contact on round or slightly profiled surfaces, improving contact stability and centring on shafts. The digital readout is operated by 0/MODE, SET, UNIT and HOLD buttons, supporting quick mm/inch conversion and temporary data locking for downstream documentation. These design choices make the micrometer a practical tool for both the shop floor and the inspection bench.
Traceability and practical functions for quality systems
A factory‑issued ISO 17025 calibration certificate (Ilac MRA) is supplied with the micrometer, providing documented traceability suitable for accredited quality processes and internal audits. The instrument supports basic measuring workflow needs — origin setting and a hold function for capturing measurements — without adding unnecessary complexity. As a compact, mechanically robust digital micrometer from Microtech Metrology, it fits into existing inspection routines and complements statistical process control with precise, verifiable readings.
Contact Metav Werkzeuge today to request a technical quotation or to reserve the CertiMet DOUBLE SPHERICAL digital micrometer (SKU 110360501) with IP65 protection and ISO 17025 calibration certificate
Technical data
- Article number: 110360501
- GTIN: 4061905459108
- Manufacturer: Microtech Metrology
Numerical data
- Measuring range: 25–50 mm
- Resolution: 0.001 mm
- Accuracy: ±0.003 mm
- Protection class: IP65
Special features
- Friction thimble micrometer head
- Double spherical measuring faces
- Functions: mm/inch, origin, hold
- Display buttons: 0/MODE, SET, UNIT, HOLD
- Calibration certificate: ISO 17025 (Ilac MRA) included
- Aluminium housing
FAQ
Is the micrometer suitable for use near machining centres?
Yes. The CertiMet double‑spherical digital micrometer features an IP65 aluminium housing, which protects the unit against dust and low‑pressure water jets, making it suitable for workshop proximity to machining operations.
What level of accuracy and resolution can be expected?
The device provides a resolution of 0.001 mm and an expressed accuracy of ±0.003 mm, allowing precise external diameter checks within the 25–50 mm range.
Does the instrument include official calibration documentation?
A calibration certificate conforming to ISO 17025 (Ilac MRA) is supplied with the micrometer, ensuring traceability for accredited quality systems and audit requirements.
Which measurement functions are built in?
The micrometer offers mm/inch conversion, an origin‑set function and a hold function, operated via the 0/MODE, SET, UNIT and HOLD buttons on the display.
Is this instrument suitable for measuring rounded or profiled shafts?
Yes. The double spherical measuring faces are designed to establish reliable contact on cylindrical and slightly profiled surfaces, improving centring and measurement consistency.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools