25mm Digital Blade Micrometer With 6.5x0.75mm Non‑Rotating Spindle, IP65, ISO17025 Calibration Certificate - Microtech Metrology
€329.00
Product information "25mm Digital Blade Micrometer With 6.5x0.75mm Non‑Rotating Spindle, IP65, ISO17025 Calibration Certificate - Microtech Metrology"
Benefit from a precise 0–25 mm measuring range, an IP65 aluminium housing and an ISO 17025 calibration certificate for reliable traceability; combine high-resolution readings and a non-rotating spindle with blade anvil for repeatable results. Order directly via Metav Werkzeuge or consult our technical advisors for application-specific advice.
Micrometer with Blade Anvil 0–25 mm — IP65 digital, ISO 17025 calibrated (Microtech Metrology)
A compact, workshop-ready micrometer designed for fine-edge and confined-space measurements across metalworking and precision engineering applications.
- IP65-rated aluminium housing for harsh environments
- Non-rotating spindle with blade anvil 6.5 x 0.75 mm
- Digital readout with MODE/SET/UNIT/HOLD buttons
Accuracy and consistency for tight tolerances
The micrometer delivers a measuring range of 0–25 mm with a reading step of 0.001 mm and an indicated accuracy of ±0.004 mm, providing a reliable basis for quality control and dimensional checks. The device’s non-rotating spindle and blade anvil 6.5 x 0.75 mm minimise edge contact errors when measuring thin sections or grooves, so measurements remain reproducible even on small workpieces. This technical stability supports faster in-process decisions and reduces rework rates in the production chain.
Durable build that withstands shop conditions
An aluminium housing with IP65 protection shields the mechanism from dust and water jets, making the instrument suitable for busy workshops and on-site inspections. The friction thimble micrometer head ensures consistent measuring force for repeated readings, reducing operator-induced variation. Robust construction and clear sealing extend service intervals and lower lifetime maintenance demands, supporting continuous operation in mixed manufacturing environments.
Fast, unambiguous digital measurement workflow
Equipped with a digital display and MODE/SET/UNIT/HOLD keys, the instrument switches readily between mm/inch readouts and offers an origin and hold function for transient or awkward measurement positions. The high-resolution display (0.001 mm) shortens read-and-record cycles and integrates easily into manual data capture procedures. Combined with the straightforward controls, this accelerates inspection throughput while preserving traceability of individual readings.
Traceability and conformity for audit-ready documentation
A calibration certificate is supplied, confirming laboratory calibration and traceability to recognised standards. The inclusion of an ISO 17025 certificate (Ilac MRA) documents measurement validity for regulated environments and supplier quality chains, simplifying acceptance in incoming inspection or final test processes. Certified calibration reduces administrative back-and-forth and supports compliance during audits and customer qualifications.
For application guidance, technical matching or to purchase the Microtech Metrology micrometer with ISO 17025 calibration, contact Metav Werkzeuge for tailored advice and dependable supply directly from Emmerich.
Technical Data
- Article number: 110660251
- GTIN: 4061905456701
- Manufacturer: Microtech Metrology
- Category: Micrometers
- SKU: 110660251
Facts
- Measuring range: 0–25 mm
- Resolution (reading): 0.001 mm
- Indicated accuracy: ±0.004 mm
- Protection class: IP65
- Measuring faces: 6.5 x 0.75 mm
Special features
- Non-rotating spindle with blade anvil
- Friction thimble micrometer head
- Aluminium housing
- Digital display with MODE/SET/UNIT/HOLD buttons
- Functions: mm/inch, origin, hold
- Calibration certificate included (ISO 17025, Ilac MRA)
- Digital instrument (battery powered)
FAQ
What measuring range does the instrument cover?
The micrometer covers a 0–25 mm measuring range suitable for small components and finishing checks.
Is the micrometer delivered calibrated?
Yes, the instrument is supplied with a calibration certificate and traceability to ISO 17025 (Ilac MRA) as stated in the product documentation.
What resolution and accuracy can be expected?
The digital readout provides 0.001 mm resolution with an indicated accuracy of approximately ±0.004 mm.
Can the instrument be used in workshop or damp conditions?
The IP65 rated aluminium housing protects against dust and water jets, making it appropriate for workshop environments.
What advantages does the blade anvil provide?
The blade anvil 6.5 x 0.75 mm is designed for measuring narrow grooves, slots or thin-walled parts where conventional anvils would obscure the edge.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools