50-75mm Digital Blade-Point Micrometer Friction Thimble, IP65, ISO 17025 Calibrated - Microtech Metrology
€419.00
Product information "50-75mm Digital Blade-Point Micrometer Friction Thimble, IP65, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of a compact digital design that combines IP65 protection, a blade‑style anvil and fine resolution for consistent edge measurement; the instrument is supplied with an ISO 17025 calibration certificate for traceable quality. Order the micrometer via Metav Werkzeuge or request technical advice from our consultants.
Micrometer "CertiMet BLADE" – digital micrometer, IP65, blade anvils 6.5 x 0.75 mm (Microtech Metrology)
A CertiMet BLADE digital micrometer for precise outside measurements of thin edges and blades, covering the 50–75 mm measuring range with high repeatability
- IP65-protected aluminium housing
- ISO17025 calibration certificate included
- Blade anvils 6.5 x 0.75 mm
- Resolution 0.001 mm; accuracy ±0.005 mm
Precise edge measurement that speeds decision-making on the shop floor
The instrument delivers sub-micron readout fidelity via a 0.001 mm display and maintains an operating accuracy of ±0.005 mm, making it a reliable choice for quality control on thin or narrow parts. The non-rotating spindle and dedicated blade anvil (6.5 x 0.75 mm) concentrate the contact area for repeatable outside measurements of blades, lips and thin flanges; the friction thimble ensures consistent measuring force to reduce operator-induced variation. These characteristics translate into fewer reworks and faster go/no-go decisions during batch inspection.
Robust build and ergonomic operation for daily industrial use
Encased in an aluminium housing with IP65 ingress protection, the instrument resists dust and low-pressure water jets, which extends service life in workshop environments. The friction thimble micrometer head and the non-rotating spindle allow controlled advance and precise contact, while the digital readout provides standard functions — mm/inch, origin, hold — accessed via 0/MODE-, SET-, UNIT- and HOLD-buttons. This combination of robust materials and intuitive controls reduces measurement time while supporting consistent documentation of results.
Traceable calibration and targeted applications for production and lab environments
A calibration certificate to ISO 17025 (Ilac MRA) is supplied, confirming traceability and making the instrument suitable for incoming inspection, process control and laboratory use where documented accuracy is required. The small blade anvils are optimised for narrow edge measurement and complement applications in blade manufacturing, precision tool inspection and thin‑walled component checks. The instrument’s specification supports integration into standard QA routines without the need for extensive operator retraining.
For traceable blade measurement from Microtech Metrology backed by an ISO 17025 certificate, contact Metav Werkzeuge in Emmerich for personalised technical guidance and supply via info@metav-werkzeuge.com or +49 2822 7131930
Technical Data
- Article number: 110660751
- GTIN: 4061905457180
- Manufacturer: Microtech Metrology
- Measuring range: 50–75 mm
- Resolution: 0.001 mm
- Accuracy: ±0.005 mm
- IP protection: IP65
- Measuring faces: 6.5 x 0.75 mm
- Digital display: with 0/MODE, SET, UNIT and HOLD buttons
- Calibration: ISO 17025 certificate included
Facts
- Measuring range: 50–75 mm
- Resolution: 0.001 mm
- Accuracy: ±0.005 mm
- Anvil dimensions: 6.5 x 0.75 mm
- Protection class: IP65
Special features
- Aluminium housing
- Friction thimble micrometer head
- Non-rotating spindle with blade anvil
- Functions: mm/inch, origin, hold
- Supplied with ISO 17025 calibration certificate
FAQ
What measuring range does this micrometer cover?
The micrometer covers a measuring range of 50–75 mm and is suitable for outside measurements within that span.
Is the measuring face suitable for thin blades and edges?
Yes; the instrument uses blade‑style measuring faces (6.5 x 0.75 mm) designed specifically for narrow edges and thin flanges.
Does the device include a calibration certificate?
A calibration certificate to ISO 17025 (Ilac MRA) is supplied with the micrometer, guaranteeing traceability of the measurement results.
How does IP65 protection benefit workshop use?
IP65 protection reduces the risk of dust ingress and resists low-pressure water jets, supporting reliable operation in demanding workshop environments.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools