25mm Digital Micrometer With 20mm Anvil, Non-Rotating Spindle, ISO 17025 Calibrated Certificate - Microtech Metrology
€279.00
Product information "25mm Digital Micrometer With 20mm Anvil, Non-Rotating Spindle, ISO 17025 Calibrated Certificate - Microtech Metrology"
Benefit from traceable ISO 17025 calibration, sub‑micrometre display resolution and a robust non‑rotating spindle to secure repeatable external measurements. Order the instrument through Metav Werkzeuge or contact the consultants for tailored specification or calibration advice.
Micrometer — digital outside micrometer, 0–25 mm, 0.001 mm resolution (Microtech Metrology)
The micrometer is a compact digital instrument for precise external measurement on workshop components and inspection benches, equipped with 20 mm anvil faces and a non‑rotating spindle for consistent contact geometry.
- Digital display, 0.001 mm resolution
- ISO 17025 calibration certificate included
- 20 mm anvil faces, non-rotating spindle
Reduce rework with consistent high‑precision readings
A digital measuring instrument with 0.001 mm readout and a verified accuracy of ±0.004 mm shortens inspection cycles by eliminating ambiguous readings. The high display resolution supports fine adjustment during setup and final inspection, while the clear control layout (0/MODE, SET, UNIT, HOLD) reduces input errors. For production environments where small deviations cause costly rework, the combination of fine resolution and stable contact mechanics improves process reliability and reduces scrap rates.
Reliable contact geometry for repeatable measurements
The micrometer’s 20 mm anvil faces and non‑rotating spindle deliver a stable measuring interface that resists misalignment over repeated cycles. Mechanical stability translates into fewer operator‑dependent variances and smoother hand‑off between measuring stations. The device’s robust contact design is particularly advantageous for routinely measured diameters and thicknesses on turned or milled parts, where identical seating and pressure are essential to reproduceable results.
Traceable calibration and quality‑system readiness
Delivered with an ISO 17025 calibration certificate, the instrument supports accredited measurement chains and audit requirements. Traceable calibration documentation facilitates integration into quality management systems and simplifies acceptance testing during incoming inspection. Such documented conformity is beneficial for batch release decisions and for maintaining measurement standards across multiple workstations or departments.
Practical features for efficient inspection workflows
The digital interface provides rapid switching between units and a data‑hold function for transient measurements, enabling faster throughput at inspection points. The compact measuring range of 0–25 mm suits precision tasks in toolmaking, component finishing and laboratory checks where short‑span accuracy is paramount. The instrument’s construction balances ergonomics with rigidity, enabling single‑handed operation without sacrificing measurement control or stability.
Contact Metav Werkzeuge for advice on integrating the Microtech Metrology digital micrometer into existing quality routines or for guidance on calibration intervals and traceability documentation
Technical data
- Article number: 110780251
- GTIN: 4061905457708
- Manufacturer: Microtech Metrology
Core specifications
- Measuring range: 0–25 mm
- Resolution: 0.001 mm
- Accuracy: ±0.004 mm
Features
- Digital display with 0/MODE, SET, UNIT and HOLD buttons
- Measuring faces: anvil Ø20 mm
- Non‑rotating spindle for consistent contact
- ISO 17025 calibration certificate supplied
- Digital measurement instrument for external dimensions
FAQ
Is the micrometer delivered with a calibration certificate?
Yes. The Microtech Metrology digital micrometer is supplied fully calibrated with an ISO 17025 certificate, providing traceable documentation for quality records (SKU 110780251).
What measurement range and resolution does the instrument offer?
The device covers 0–25 mm with a display resolution of 0.001 mm, suitable for fine workshop and laboratory checks.
How does the non‑rotating spindle benefit measurement reproducibility?
A non‑rotating spindle ensures identical contact geometry at each measurement, reducing operator‑induced variation and improving reproducibility with the Microtech Metrology micrometer.
Which buttons are available on the digital display and what do they do?
The display includes 0/MODE, SET, UNIT and HOLD functions to zero the instrument, select measuring modes, switch units and freeze readings for ease of documentation.
Is this instrument suitable for production inspection tasks?
Yes. The combination of 0.001 mm resolution, ±0.004 mm accuracy and ISO 17025 traceability makes it suitable for routine production inspection and quality assurance.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools