50-75mm Screw Micrometer With 20mm Anvil, Digital Display, ISO 17025 Calibrated - Microtech Metrology
€399.00
Product information "50-75mm Screw Micrometer With 20mm Anvil, Digital Display, ISO 17025 Calibrated - Microtech Metrology"
Combining 0.005 mm measurement accuracy with an included ISO 17025 calibration certificate and stable disc measuring faces Ø20 mm, this digital micrometer ensures reproducible, inspection-grade results for production control. Order the instrument directly via Metav Werkzeuge or consult our specialists for application-specific guidance.
Microtech Digital Micrometer – 50–75 mm range, 0.005 mm accuracy
The micrometer is a digital outside micrometer designed for precise dimensional checks of medium-sized components in production and quality assurance.
- ISO 17025 calibration certificate included
- 0.005 mm accuracy for repeatable inspection
- Disc measuring faces Ø20 mm for stable contact
- Digital display with 0/MODE/SET/UNIT/HOLD buttons
Consistent laboratory accuracy for routine inspection
With a specified accuracy of 0.005 mm and a display resolution of 0.001 mm, this instrument bridges handheld convenience and lab-grade repeatability. The factory ISO 17025 calibration and accompanying calibration certificate mean readings can be relied on immediately after delivery, reducing setup time for incoming inspection or final quality checks. Such traceability is particularly valuable where documented tolerances are audited or where batch acceptance depends on tight dimensional control.
Stable contact geometry for delicate and finished surfaces
The disc measuring faces Ø20 mm provide a broad, even contact area that reduces local indentation and distributes contact force over the measured surface. Together with the non-rotating spindle, this geometry preserves surface finish while improving reproducibility between successive readings. The 50–75 mm span places the instrument in the middle range for workshop and inspection tasks, making it well suited to components such as shafts, housings and turned parts that require consistent outside-diameter checks.
Clear digital handling and controlled measurement routine
The digital display with 0/MODE/SET/UNIT/HOLD controls simplifies routine measurement: zeroing, unit selection and value hold are immediately accessible, which speeds up repetitive tasks and reduces operator errors. Microtech’s build quality supports stable calibration retention, and the compact form keeps handling comfortable during extended measurement runs. For application advice or selection between similar models, Metav Werkzeuge’s technical team is available to provide context-specific recommendations and to ensure the chosen instrument matches production needs.
Contact Metav Werkzeuge to request this Microtech micrometer (SKU 110780751) with ISO 17025 calibration certificate and expert application advice — call +49 2822 7131930 or email info@metav-werkzeuge.com
Technical Data
- Article number: 110780751
- GTIN: 4061905457975
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 50–75 mm
- Accuracy: 0.005 mm
- Resolution: 0.001 mm
Special features
- Product category: Digital outside micrometer
- Measuring faces: Disc Ø20 mm
- Spindle: non-rotating
- Display: Digital with 0/MODE/SET/UNIT/HOLD
- Calibration: ISO 17025 certificate included
FAQ
What measuring range does the instrument cover? The micrometer covers a 50–75 mm measuring range, making it suitable for medium-sized shafts and housings.
Is the micrometer supplied calibrated? Yes. The Microtech micrometer is delivered with an ISO 17025 calibration certificate, so documented traceability is provided at handover.
What accuracy and resolution can be expected? The instrument provides an accuracy of 0.005 mm and a display resolution of 0.001 mm, appropriate for precise workshop inspections.
Which measuring faces are fitted and why are they useful? The micrometer uses disc measuring faces Ø20 mm, which spread contact pressure and reduce local indentation, supporting consistent readings on finished surfaces.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools