50.8mm Digital Dial Indicator Absolute System With USB, IP75, ISO 17025 Calibrated - Microtech Metrology
€249.00
Product information "50.8mm Digital Dial Indicator Absolute System With USB, IP75, ISO 17025 Calibrated - Microtech Metrology"
Precise, traceable measurements are delivered by the combination of an absolute measuring system, high resolution and USB data output, ensuring efficient integration into inspection workflows; benefit from ISO 17025 calibration and a supplied certificate. Order directly via Metav Werkzeuge or request tailored advice from our consultants.
Digital Absolute Dial Indicator by Microtech Metrology — 0–50.8 mm, USB
The digital absolute dial indicator from Microtech Metrology is a compact, shop‑ready measuring instrument for repeatable length checks and setup tasks across inspection benches and production machines.
- Absolute measuring system for traceable values
- USB data output for quick logging
- ISO 17025 calibrated with certificate
- Resolution 0.001 mm and mm/inch display
Integrates measurement data into productive workflows
Equipped with an absolute measuring system and a USB data output, this gauge simplifies digital record keeping and SPC collection directly from the workshop. The absolute system preserves the zero point after power cycles, reducing setup time and avoiding cumulative errors. The combination of mm/inch toggling and preset functions facilitates cross‑machine transfers while the USB interface enables fast logging to inspection software, increasing throughput and reducing transcription mistakes.
Reliable, repeatable readings suited to quality control
With a resolution of 0.001 mm and an stated accuracy of ±0.007 mm, the instrument meets the demands of routine industrial quality control. A consistent measuring force of 1.2–2.2 N helps produce repeatable contact conditions, which is essential when comparing small deviations across batches. The device’s digital display provides PRESET, HOLD and MODE functions that assist in stable readouts and eliminate uncertainty during manual handling.
Built for everyday workshop conditions
The indicator is designed for pragmatic handling: the absolute measuring system avoids re‑zeroing during shifts, the battery is a standard CR2032 3V, and the housing carries an IP75 rating for added resistance against dust and splash exposure typical on shop floors. Controls are laid out for intuitive operation, so operators can focus on measurement rather than instrument management. Robustness and straightforward battery serviceability reduce downtime and total cost of ownership.
Traceability and calibration tailored for professional use
Delivered fully calibrated under ISO 17025, the instrument includes a calibration certificate to support quality documentation and audit trails. For applications that require documented traceability—laboratory checks, incoming inspection or assembly verification—this certificate confirms conformity and shortens acceptance procedures. The absolute measuring principle together with certified calibration makes the tool suitable for both production monitoring and formal inspection tasks.
Contact Metav Werkzeuge for integration advice and to order the Microtech Metrology digital absolute indicator with ISO 17025 calibration and USB data output; our specialists in Emmerich will advise on configuration and delivery options
Technical data
- Article number: 120125502
- GTIN: 4061905081972
- Manufacturer: Microtech Metrology
Core specifications
- Measuring range: 0–50.8 mm
- Resolution: 0.001 mm / 0.00005 in
- Accuracy: ±0.007 mm
- Measuring force: 1.2–2.2 N
- Protection class: IP 75
Features & delivery
- Measuring system: Absolute
- Display functions: mm/inch, PRESET, HOLD, MODE
- Data output: USB
- Power supply: CR2032 3V battery
- Calibration: Delivered with ISO 17025 calibration certificate
FAQ
What measuring range does the indicator cover?
The Microtech Metrology digital absolute indicator covers a measuring range of 0–50.8 mm.
Can measurement data be exported directly to a computer?
Yes, the gauge offers a USB data output for direct export of readings into logging or SPC software.
Is the device supplied calibrated for traceability?
The instrument is delivered fully calibrated under ISO 17025 and includes a calibration certificate for quality documentation.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools