10–18mm Internal Micrometer Carbide Measuring Faces 0.008mm Accuracy 110mm Depth - Microtech Metrology
€199.00
Product information "10–18mm Internal Micrometer Carbide Measuring Faces 0.008mm Accuracy 110mm Depth - Microtech Metrology"
Take advantage of high repeatability and wear‑resistant carbide measuring faces combined with fine analogue resolution for dependable bore inspection in precision workshops; order the instrument directly via Metav Werkzeuge or consult Metav’s specialists for application advice.
Internal Fine Measuring Instrument by Microtech Metrology — 10–18 mm range, carbide measuring faces
The Internal Fine Measuring Instrument is an analogue internal measuring gauge designed for precise bore measurement and fine mechanical inspection in workshop and laboratory environments
- 10–18 mm measuring range
- 0.008 mm accuracy
- Carbide measuring faces
- 0.01 mm analogue resolution
Accurate readings where space is limited
This gauge delivers 0.008 mm metrological accuracy together with an analogue 0.01 mm division, enabling reliable pass/fail decisions and tight‑tolerance verification in compact bores. The combination of fine resolution and low measurement uncertainty supports faster quality checks and reduces rework by catching deviations early. The analogue readout provides an immediate visual assessment, which is particularly useful on the shop floor where rapid interpretation of results improves throughput without compromising precision.
Durable contact for long‑term stability
Hardmetal (carbide) measuring faces ensure low wear and stable contact geometry during repeated internal measurements. This robustness preserves calibration over many cycles and maintains measurement certainty where softer contact materials would round or deform. The gauge’s construction is optimised for repeatable contact under light, controlled measuring force, so the contact surfaces retain their shape and dimension even in frequent inspection routines.
Compact design for fine mechanical work
Classified in the micro category (10–100 mm maximum range), this instrument is tailored to fine‑mechanics tasks: small bores, watch components, precision fittings and miniature assemblies. The compact measuring span of 10–18 mm and a measuring depth of 110 mm combine reach with low profile handling, making the gauge easy to position inside confined geometries while keeping the sensing elements rigid and stable. This balance between reach and stiffness reduces operator‑induced error and supports reproducible measurements across similar parts.
Practical advantages for routine inspection
Analogue operation removes dependence on batteries and electronic interfaces, offering immediate, maintenance‑light operation for continuous shop use. The simple, mechanical nature of the gauge makes it well suited to integration into established inspection benches and paired measurement routines. Clear, wear‑resistant contact faces and a pragmatic measuring depth of 110 mm help shorten set‑up times and keep inspection cycles efficient, supporting production schedules and quality control targets.
Contact Metav Werkzeuge for tailored advice or to purchase this Microtech Metrology internal gauge directly from Metav Werkzeuge’s Emmerich facility; Metav’s specialists can confirm suitability for specific bore sizes and inspection procedures
Technical Data
- Article number: 132018100
- GTIN: 4061905453656
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 10–18 mm
- Measuring depth: 110 mm
- Resolution: 0.01 mm
- Accuracy: 0.008 mm
- Analogue instrument
Special features
- Carbide measuring faces
- Category: Micro (max. range 10–100 mm)
- SKU: 132018100
FAQ
What measuring range does the instrument cover?
The gauge covers a measuring range of 10–18 mm, suitable for small‑bore inspections and compact components
What resolution and accuracy are provided?
The analogue readout has a division of 0.01 mm, with an overall accuracy of 0.008 mm, optimised for fine mechanical quality control
Are the contact faces durable for repetitive use?
Yes, the instrument is fitted with carbide measuring faces that provide high wear resistance and long‑term stability under repeated measurement cycles
What applications suit this gauge best?
This micro‑category gauge is ideal for watchmaking, miniature assemblies, precision fittings and any workshop task requiring reliable internal measurements within the 10–18 mm span
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools