18-50mm Internal Precision Gauge With Carbide Measuring Faces 0.01mm Graduation, Depth 500mm - Microtech Metrology
€449.00
Product information "18-50mm Internal Precision Gauge With Carbide Measuring Faces 0.01mm Graduation, Depth 500mm - Microtech Metrology"
The combination of a compact 18–50 mm measuring range, carbide contact faces and a fine 0.01 mm dial resolution ensures repeatable internal measurements with low wear and long service life. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice.
Microtech Metrology Internal Precision Bore Gauge – 18–50 mm, carbide contact faces
A compact internal precision bore gauge from Microtech Metrology for fine workshop and inspection tasks, designed to measure internal diameters between 18 and 50 mm with a durable carbide contact and an analogue dial readout.
- 18–50 mm measuring range
- Carbide measuring faces for reduced wear
- 0.01 mm resolution, ±0.012 mm accuracy
Reliable bore measurement for compact components
The internal measuring instrument offers a measuring range of 18–50 mm, placing it in the micro-range ideal for small assemblies and precision components. With a resolution of 0.01 mm and an indicated accuracy of ±0.012 mm, the gauge provides dependable numerical information for quality control and set-up routines. The analogue dial format simplifies trend observation during serial inspections, while the compact construction helps to keep measuring motion stable, reducing the influence of hand-borne disturbance.
Durable contact surfaces that keep tolerances
The device is equipped with carbide measuring faces, which resist wear and maintain consistent contact geometry over prolonged use. This increases reproducibility of internal diameter readings and reduces the need for frequent replacement of contact points. For production environments where repeat readings are required, carbide faces mean less drift over time and reduced maintenance, ensuring that process tolerances remain achievable without constant tool change.
Extended reach and clear analogue feedback for practical use
A measuring depth of 500 mm provides extended reach for deeper bores or recessed features, while the robust dial display gives immediate visual feedback during alignment and measurement runs. The analogue mechanism, together with a finely graduated scale, supports quick decision-making on the shop floor where visual trend cues can be as valuable as single numeric outputs. The instrument’s form factor balances reach and rigidity, offering practical handling for bench and in-situ checks.
Built for inspection routines and workshop integration
Designed as an inspection tool for internal diameters, the gauge combines a small footprint with workshop-grade durability. Its mechanical dial and carbide contact set-up make it well suited to serial checks, fixture set-ups and final inspection tasks in metalworking and precision engineering shops. The instrument supports efficient measurement cycles, and its specifications make it a reliable choice for technicians who require both repeatability and straightforward operation.
Contact Metav Werkzeuge in Emmerich for a technical consultation or to arrange supply of this Microtech Metrology internal precision bore gauge (SKU 132050111) and discuss delivery options close to your production site
Technical Data
- Article number: 132050111
- GTIN: 4061905453670
- Manufacturer: Microtech Metrology
- Type: analogue internal bore gauge
- Resolution: 0.01 mm
- Specified accuracy: ±0.012 mm
Facts
- Measuring range: 18–50 mm
- Minimum range: 18 mm
- Maximum range: 50 mm
- Measuring depth (reach): 500 mm
Special features
- Carbide measuring faces
- Analogue dial indicator format
- Suitable for micro-range precision work (18–50 mm)
- Durable construction for workshop use
FAQ
What is the usable measuring range of the bore gauge?
The instrument covers internal diameters from 18 to 50 mm, making it suitable for small to medium bores within the micro-range.
How fine is the display and what accuracy can be expected?
The dial provides a 0.01 mm resolution and the device is specified with an accuracy of ±0.012 mm, which supports routine inspection and set-up tasks.
Are the contact faces hard-wearing?
Yes, the gauge is fitted with carbide measuring faces, designed to reduce wear and preserve contact geometry for consistent readings.
Can this gauge reach recessed bores?
The tool offers a measuring depth of 500 mm, allowing measurements in deeper bores or recessed features where standard short-reach gauges would not suffice.
Is the instrument suitable for serial inspection on the shop floor?
The combination of a clear analogue dial, carbide contacts and a compact, rigid design makes this instrument well suited to serial checks and workshop inspection routines.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools