18-50mm Internal Micrometer Carbide Measuring Faces, 0.003mm Accuracy, 130mm Depth - Microtech Metrology
€369.00
Product information "18-50mm Internal Micrometer Carbide Measuring Faces, 0.003mm Accuracy, 130mm Depth - Microtech Metrology"
Take advantage of the combination of ±0.003 mm accuracy, carbide measuring faces and a 130 mm measuring depth for dependable bore inspection. Order the instrument directly via Metav Werkzeuge or ask our consultants for application advice.
Internal Dial Bore Gauge — 18–50 mm, carbide measuring faces (Microtech Metrology)
The Internal Dial Bore Gauge is an analogue precision instrument for fast, repeatable internal diameter checks in workshop and metrology environments.
- 18–50 mm measuring range
- Carbide measuring faces for wear resistance
- 0.001 mm dial reading resolution
- 130 mm effective measuring depth
Reproducible precision for quality control
The gauge delivers a manufacturer-stated accuracy of ±0.003 mm, combined with a 0.001 mm dial reading for fine discrimination, so measurement uncertainty is minimised in repetitive checks. This level of precision supports process control and reduces the risk of rejected parts by providing consistent, comparable results. The analogue dial enables immediate visual assessment, while the small incremental scale simplifies interpretation of deviations during in-process inspections.
Durable contact surfaces for long service life
Equipped with carbide measuring faces, the instrument resists wear under frequent contact with inner bores, maintaining measurement integrity over time. Hardmetal contact points preserve the reference geometry and reduce the need for premature replacement, which contributes to lower lifecycle costs and steady inspection performance in production settings where abrasive or hard-edged workpieces are common.
Compact range tailored to micro applications
Classified in the Mikro category for measuring ranges up to 100 mm, this gauge covers the 18–50 mm span typical of small bores in precision components. The modest span yields a stiff, low-warp geometry that is especially suitable for fine mechanical work. The 130 mm measuring depth extends capability to recessed bores, allowing checks beyond simple through-holes while retaining the handling advantages of a compact tool for one-person operation.
Simple handling for reliable results on the shop floor
The analogue dial gauge format offers intuitive operation: rapid setup, tactile feedback and immediate readings without menu navigation. Robust mechanical construction minimises sensitivity to workshop conditions and supports stable reading under normal workshop handling. Combined with familiar measuring technique, the instrument fits seamlessly into routine inspection procedures and complements digital systems when a quick comparative check is required.
For precise internal measurements, choose the Microtech Metrology internal dial bore gauge via Metav Werkzeuge — consult our Emmerich team for application guidance and order support.
Technical Data
- Article number: 132050800
- GTIN: 4061905454172
- eCl@ss: 21170310
- Manufacturer: Microtech Metrology
Core data
- Measuring range: 18–50 mm
- Measuring depth: 130 mm
- Accuracy: ±0.003 mm
- Resolution/readout: 0.001 mm
- Analogue/dial: Yes
Special features
- Carbide measuring faces
- Analogue dial gauge reading
- Classified as Mikro (10–100 mm)
- Suitable for recessed bore inspection
FAQ
What measuring range does this instrument cover? The internal dial bore gauge from Microtech Metrology covers 18–50 mm and is identified by SKU 132050800.
How precise is the reading and what does that mean for inspection? The device offers an accuracy of ±0.003 mm with a 0.001 mm dial resolution, which enables fine discrimination of bore deviations for reliable quality control.
Are the contact faces durable for daily use? Yes, the gauge has carbide measuring faces designed to withstand repeated contact and to retain measuring geometry under normal workshop use.
Can the gauge measure deep or recessed bores? With a measuring depth of 130 mm, the instrument handles many recessed bore situations while maintaining stable measurement geometry.
Is the instrument suitable for small, precision components? The 18–50 mm range places this gauge in the Mikro class, making it well suited to fine mechanical parts and compact precision work.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools