18-50mm Internal Micrometer With Carbide Measuring Faces, 0.003mm Resolution - Microtech Metrology
€899.00
Product information "18-50mm Internal Micrometer With Carbide Measuring Faces, 0.003mm Resolution - Microtech Metrology"
Combine carbide measuring faces, a compact 18–50 mm range and ±0.003 mm accuracy to secure consistent internal measurements; order the instrument directly via Metav Werkzeuge or consult their specialists for advice.
Internal Dial Bore Gauge (18–50 mm) by Microtech Metrology — Carbide measuring faces, ±0.003 mm accuracy
The Internal Dial Bore Gauge is a precision instrument for internal diameter inspection in fine mechanical workshops and production control, designed for repeatable checks across the 18–50 mm range
- Carbide measuring faces for long-term durability
- Measurement range 18–50 mm for internal diameters
- Resolution 0.001 mm, accuracy ±0.003 mm
- Analog dial for fast visual assessment
Engineered for repeatable internal measurements in small components
The gauge delivers consistent precision for internal diameter checks thanks to a fine resolution of 0.001 mm and an accuracy specification of ±0.003 mm, which translates into reliable repeatability during serial inspection. The combination of a high-resolution dial and hardened, carbide measuring faces reduces wear and maintains calibration over extended use, supporting quality assurance processes where small tolerances matter. This makes the tool particularly suited for precision assemblies, plug gauges and production sampling where objective, comparable readings are required.
Compact range and micro-class handling for delicate tasks
With a measurement span of 18–50 mm, the instrument falls into the micro class of internal measuring tools, ideal for watchmaking, instrument manufacture and precision subassemblies where short measuring jaws preserve stiffness and minimise deflection. The compact format eases handling and positioning in confined bores while keeping tactile control for the operator. The device’s analogue readout affords an immediate overview of deviation, enabling quick acceptance or rework decisions without complex electronics.
Durable contact surfaces and practical probe reach
Equipped with carbide measuring faces, the gauge resists abrasive wear and retains correct contact geometry under frequent use, which lowers the need for frequent surface rework and preserves measurement integrity. The instrument also provides an extended probe capability with a measuring depth of 1000 mm, allowing reach into deeper bores or stepped components where standard short probes would be insufficient. The robust contact design supports reproducible results over many cycles, reducing process variation and scrap rates.
Clear inspection workflow and integration into quality routines
The analogue dial pointer simplifies pass/fail judgement during inline checks and initial setup, while the device’s accuracy supports traceable sampling plans in workshop and small-series production. Combined with routine calibration and documented procedures, the instrument helps close the gap between quick visual checks and full laboratory measurement, offering a pragmatic balance of speed and precision. For organisations that require documented traceability, the gauge’s stable performance under repeated use helps ensure measurements remain within specified control limits.
Choose the Microtech Metrology internal dial bore gauge for precise internal measurements — contact Metav Werkzeuge for tailored procurement advice and reliable delivery from Emmerich.
Technical Data
- Article number: 132050822
- GTIN: 4061905453496
- Manufacturer: Microtech Metrology
- Category: Feinmessgeräte
Facts
- Measurement range: 18–50 mm
- Measuring depth: 1000 mm
- Accuracy: ±0.003 mm
- Resolution: 0.001 mm
Special features
- Carbide measuring faces
- Analog dial gauge
- Analog device
- Micro-class internal measuring instrument
FAQ
What measurement range does the instrument cover?
The internal dial bore gauge covers a measurement range of 18–50 mm and is configured for fine internal diameter inspection.
How accurate is the gauge for routine checks?
The instrument achieves an accuracy of ±0.003 mm with a display resolution of 0.001 mm, offering repeatable results for workshop and production control.
Are the contact faces suitable for abrasive applications?
Yes, the gauge features carbide measuring faces, which provide enhanced wear resistance for prolonged use in demanding inspection tasks.
Can this gauge reach into deep bores?
The tool has a measuring depth specification of 1000 mm, enabling access to deeper internal features where required.
Is the readout digital or analogue?
This model uses an analogue dial gauge for fast visual assessment and immediate pass/fail judgement during inspection.
Is the instrument suitable for watchmaking and micro components?
Given its micro-class measurement span (18–50 mm) and high resolution, the gauge is well suited to fine mechanical work such as watch and instrument components.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools