50-160mm Internal Precision Gauge Carbide Measuring Faces 0.01mm Resolution, Analogue - Microtech Metrology
€169.00
Product information "50-160mm Internal Precision Gauge Carbide Measuring Faces 0.01mm Resolution, Analogue - Microtech Metrology"
The combination of precise mechanical measurement, wear‑resistant carbide contact faces and a practical measuring depth makes this instrument well suited to routine internal inspections; benefit from reliable repeatability across the 50–160 mm span. Order directly via Metav Werkzeuge or consult our specialists for application advice.
Internal precision measuring instrument — analogue gauge with carbide measuring faces
The Internal precision measuring instrument is an analogue internal gauge for accurate inspection of bores, recesses and internal features in metalworking and quality control applications, covering a 50–160 mm measurement range.
- Analogue display with 0.01 mm graduation
- Measurement range 50–160 mm
- Carbide measuring faces for wear resistance
- Measuring depth 150 mm for deep bores
Consistent inspection accuracy that reduces rework
The instrument delivers a declared accuracy of 0.015 mm, which positions it between standard shop gauges and high‑end lab comparators for demanding routine checks. With an analogue vernier and a readable 0.01 mm graduation, operators gain a direct, low‑complexity means of verifying internal dimensions without electronic interfaces. This mechanical precision supports faster decision cycles on the shop floor and reduces downtime caused by uncertain measurements.
Durable contact faces extend service intervals
Equipped with carbide measuring faces, the gauge resists abrasion and maintains measurement integrity where frequent contact with finished bores occurs. The hardened contact surfaces preserve geometry over prolonged use, lowering the frequency of regrinding or replacement and helping to keep inspection costs predictable. A measuring depth of 150 mm allows access to deeper internal features while retaining stable support for the probe assembly.
Simple handling for reliable everyday results
The analogue design keeps operation intuitive: the vernier mechanism offers tactile feedback and does not rely on batteries or electronics, so maintenance is minimal and the device remains operational in harsher workshop environments. As a rugged internal gauge it suits standard metrology tasks in machine shops, toolrooms and incoming inspection. The compact mechanical layout aids repeatable positioning and consistent contact pressure, improving comparability between operators without complex training.
Contact Metav Werkzeuge to discuss how this Microtech Metrology internal precision measuring instrument (SKU 132160100) can be integrated into existing inspection routines and to request application guidance — phone +49 2822 7131930 or email info@metav-werkzeuge.com
Technical data
- Article number: 132160100
- GTIN: 4061905453700
- Manufacturer: Microtech Metrology
Facts
- Measurement range: 50–160 mm
- Accuracy: 0.015 mm
- Reading: 0.01 mm
- Measuring depth: 150 mm
- Type: Analogue (vernier)
Special features
- Carbide measuring faces
- Suited to internal measurements, bores and recesses
- Category: Precision measuring instrument (internal gauge)
FAQ
What measurement range does the instrument cover?
The instrument covers internal dimensions from 50–160 mm, suitable for common bore and recess inspections.
How precise is the gauge in regular use?
Declared accuracy is 0.015 mm; the analogue vernier with 0.01 mm graduation supports repeatable shop‑floor checks.
Are the contact faces suitable for frequent inspection jobs?
Yes — the carbide measuring faces are designed for wear resistance, sustaining dimensional stability under regular use.
Which applications are best suited to this instrument?
Ideal for routine bore and internal feature checks in machining, toolmaking and incoming inspection where a robust analogue gauge is preferred.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools