50-160mm Internal Dial Bore Gauge Carbide Measuring Faces 0.015mm Accuracy, Analog - Microtech Metrology
€699.00
Product information "50-160mm Internal Dial Bore Gauge Carbide Measuring Faces 0.015mm Accuracy, Analog - Microtech Metrology"
Take advantage of precise internal measurements with the combination of analogue readability, carbide measuring faces, and a practical 50–160 mm range for consistent quality control. Order or request advice through Metav Werkzeuge for a reliable supply and expert consultation.
Internal precision gauge — Analogue instrument with carbide measuring faces (50–160 mm)
The Internal precision gauge is an analogue fine measuring instrument designed for accurate internal diameter checks in workshops and quality-control environments.
- Analogue reading with 0.01 mm resolution
- Accuracy ±0.015 mm
- Carbide measuring faces for long wear resistance
- Measuring range 50–160 mm
Consistent accuracy for repeatable internal measurements
Built around an analogue dial principle with a readable increment of 0.01 mm, this instrument delivers stable measurement values with an accuracy of ±0.015 mm. The clear mechanical indication reduces interpretation errors on the shop floor and speeds up routine inspections, which improves throughput in batch control. Where repeatability matters, the robust mechanical train provides predictable behaviour across cycles, making the device suitable for final checks and acceptance testing in small- to medium-series production.
Wear-resistant faces and robust contact geometry
The unit is equipped with carbide measuring faces, a choice that prioritises long-term dimensional stability. Carbide tips maintain a consistent contact profile even after prolonged use, lowering drift and maintenance intervals. This wear resistance ensures that the contact surfaces remain precise and that force distribution at the measurement points stays uniform, which is critical for repeatable internal dimension checks in metallic and non-metallic components.
Practical measuring range and handling for workshop use
Covering 50–160 mm, the gauge addresses the most common internal diameter needs in mechanical workshops and component assembly. The specified measuring depth 1000 mm supports applications where access depth is a factor, enabling checks in deeper bores or stepped features without improvised extensions. Its analogue design keeps the instrument straightforward to operate and serviceable in environments where electronic solutions might be impractical, providing a dependable compromise between simplicity and professional-grade precision.
Designed for production control and routine metrology
Manufactured by Microtech Metrology, this fine measuring instrument integrates well into standard inspection routines and complements digital and optical systems with a tactile, direct-reading alternative. The durable construction and measured performance characteristics reduce the frequency of replacements and downtime, supporting a cost-effective quality strategy. The analogue gauge is particularly well suited to workshop metrology tasks where immediate, interpretable results are preferred and where a robust mechanical solution improves reliability across shifts.
Contact Metav Werkzeuge for expert guidance on Microtech Metrology precision instruments and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical Data
- Article number: 132160122
- GTIN: 4061905453861
- Brand: Microtech Metrology
- Category: Fine measuring instruments
- Type: Analogue internal gauge
Numbers / Facts
- Reading increment: 0.01 mm
- Stated accuracy: ±0.015 mm
- Measuring range: 50–160 mm
- Measuring depth: 1000 mm
- eCl@ss: 21170310
Special features
- Carbide measuring faces
- Analogue dial indication
- Robust mechanical construction
- Suitable for workshop and quality-control applications
FAQ
How precise is the instrument for internal diameter checks?
The instrument provides a readable increment of 0.01 mm and a stated accuracy of ±0.015 mm, making the Microtech Metrology internal precision gauge (SKU 132160122) suitable for routine workshop inspections and many production quality checks.
Are the measuring faces durable for long production runs?
Yes, the device features carbide measuring faces, which resist wear and maintain contact geometry over extended use, ensuring consistent results in repetitive measurement tasks.
What measuring range and depth does this gauge cover?
The gauge covers an internal diameter range of 50–160 mm and a measuring depth of 1000 mm, allowing checks in deeper bores and stepped internal features without additional extensions.
Is the instrument suitable for use in both workshop and laboratory environments?
The analogue construction and robust build make it well suited to workshops and production environments; it is also appropriate for routine laboratory inspections where a mechanical, direct-reading solution is required.
Which materials can be measured reliably with this gauge?
The gauge is designed for standard internal diameter measurements across a variety of materials; the carbide faces are particularly beneficial when inspecting harder or abrasive surfaces.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools