50-160mm Internal Micrometer With Carbide Measuring Faces 0.003mm Resolution, Depth 500mm - Microtech Metrology
€649.00
Product information "50-160mm Internal Micrometer With Carbide Measuring Faces 0.003mm Resolution, Depth 500mm - Microtech Metrology"
The combination of ±0.003 mm accuracy, 1 µm resolution and hard‑metal measuring faces ensures reliable inside measurements for both workshop and inspection tasks; this internal precision instrument delivers reproducible results across its 50–160 mm measuring range. Order directly via Metav Werkzeuge or contact our consultants for specification advice.
Internal precision measuring instrument (50–160 mm) by Microtech Metrology — analogue dial gauge, carbide faces
A internal precision measuring instrument designed for fine internal measurement tasks, combining a high-resolution analogue dial indicator with wear‑resistant carbide measuring faces for durable, repeatable bore inspection.
- 50–160 mm measuring range
- 0.003 mm accuracy for fine measurements
- Carbide measuring faces for long wear
Precise measurement where it matters
This instrument provides accuracy of ±0.003 mm together with a resolution of 0.001 mm (1 µm), making it suitable for demanding internal measurements in metalworking and quality control. The analogue dial indicator gives an immediate visual verdict while the fine graduation supports micro‑adjustments; the result is a straightforward checking routine with quantifiable tolerance adherence. As a tool intended for inspection tasks, it reduces rework by flagging deviations early in the production chain.
Durable design for repeated shop‑floor use
Equipped with hard‑metal (carbide) measuring faces, the gauge resists wear in abrasive or high‑throughput environments, preserving contact geometry and measurement integrity over time. Its construction supports consistent contact force and repeatability during successive checks, which translates into fewer calibration interventions and stable process control. The instrument’s build is therefore a practical choice for workshops and small series production where component quality must remain constant.
Practical range and reach for internal bores
Covering a measuring range from 50 to 160 mm with a measuring depth of 500 mm, the device bridges typical inspection tasks for medium‑sized bores and recesses encountered in machining and assembly. Classified within the standard measuring class (range up to 300 mm), it balances reach and rigidity to avoid deformation during handling, making single‑operator checks efficient without sacrificing precision.
For application advice or to purchase this Microtech Metrology internal precision measuring instrument, contact Metav Werkzeuge in Emmerich for tailored guidance and fast delivery from our European quality centre.
Technical Data
- Article number: 132160811
- GTIN: 4061905453526
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 50–160 mm
- Resolution / reading: 0.001 mm
- Accuracy: ±0.003 mm
- Measuring depth: 500 mm
- Analogue dial indicator
Special features
- Carbide measuring faces (hard metal)
- Suitable for fine internal measurements and bore inspection
- Classified in standard measuring class (max 300 mm)
- Category: Feinmessgeräte / precision metrology
FAQ
How precise is the instrument for comparative checks?
The instrument achieves an accuracy of ±0.003 mm and a reading of 0.001 mm, so the internal precision measuring instrument from Microtech Metrology is suitable for high‑precision comparative checks in quality control.
Can this gauge reach deep bores and recesses?
Yes — the device offers a measuring depth of 500 mm, allowing access to deeper bores and internal features within its 50–160 mm range.
Are the measuring faces durable for frequent use?
The gauge is fitted with carbide (hard‑metal) measuring faces, ensuring long wear resistance and consistent contact geometry under repeated shop‑floor use.
Which applications suit this instrument best?
This internal precision instrument is designed for internal bore inspection in machining, fixture checks and small series production where micrometre‑level resolution and repeatability are required.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools