160-250mm Internal Micrometer Carbide Measuring Faces 0.015mm Accuracy, Depth 1000mm - Microtech Metrology
€720.00
Product information "160-250mm Internal Micrometer Carbide Measuring Faces 0.015mm Accuracy, Depth 1000mm - Microtech Metrology"
Take advantage of a combination of high repeatability, low wear and practical measuring depth for reliable internal inspection results; order the Microtech Metrology internal precision bore gauge directly via Metav Werkzeuge or consult our specialists for application advice.
Microtech Metrology Internal Precision Bore Gauge 160–250 mm with Carbide Measuring Faces
The Microtech Metrology Internal Precision Bore Gauge 160–250 mm is an analogue internal measuring instrument designed for accurate bore checks and inspection tasks in workshop and inspection environments.
High repeatability ±0.015 mm Analogue dial with 0.01 mm resolution Carbide measuring faces for long life Measuring range 160–250 mm
Precise readings for process control and inspection
The internal precision bore gauge delivers high repeatability with an indicated accuracy of ±0.015 mm, combined with an analogue dial that has a 0.01 mm resolution. This combination supports tight tolerances in serial inspection and set-up work: the fine-scale dial allows immediate visual decisions during run‑offs and set-up changes, while the solid mechanical construction reduces variability caused by handling. The instrument is presented as a robust inspection tool rather than a disposable gauge, contributing to consistent quality control in production environments.
Engineered for typical workshop ranges and extended access
Classified in the Standard (100–300 mm) category, the gauge covers the most common internal measurement demands encountered in metalworking and general machine shops. The measuring range 160–250 mm offers a practical span for medium‑sized bores, while the measuring depth 1000 mm provides access to deeper recesses and stepped bores that standard short probes cannot reach. This balance of reach and stiffness makes the device well suited to fixture checks, bore run‑outs and assembly verifications where one instrument must service a range of components.
Durable contact design reduces recalibration and downtime
Equipped with carbide measuring faces, the instrument resists wear from repeated contact with ferrous and non‑ferrous bores, extending intervals between maintenance. The analogue mechanism minimises electronic vulnerability and simplifies on‑the‑bench faultfinding, while the hardened contact surfaces preserve measurement integrity under regular use. For production environments where serviceability and long service life are priorities, this gauge supports throughput by reducing corrective downtime and maintaining reproducible results.
For purchase or bespoke application guidance for the Microtech Metrology internal precision bore gauge, contact Metav Werkzeuge in Emmerich for fast expert support and reliable delivery.
Technical data
- Article number: 132250122
- GTIN: 4061905453892
- Manufacturer: Microtech Metrology
- ECLASS: 21170310
Core specifications
- Measuring range: 160–250 mm
- Measuring depth: 1000 mm
- Resolution: 0.01 mm
- Accuracy: ±0.015 mm
- Analogue instrument
Features & materials
- Carbide measuring faces
- Analogue dial indicator
- Hardwearing construction
- Category: Standard (100–300 mm)
FAQ
What accuracy can be expected from this internal gauge?
The Microtech Metrology internal precision bore gauge specifies an accuracy of ±0.015 mm, supported by an analogue dial with 0.01 mm resolution for fine reading.
Is the instrument suitable for deep bores and stepped internal features?
Yes, the gauge offers a measuring depth of 1000 mm, which enables access to deep bores and many stepped internal geometries while remaining practical for workshop use.
How do the carbide measuring faces benefit long‑term use?
Carbide measuring faces increase wear resistance during repeated contact measurements, helping to maintain consistent measurement results and extend service intervals.
Does the gauge require electronic interfaces or data output?
This is an analogue instrument with a dial indicator; it does not provide electronic data output and is intended for direct visual inspection and manual recording.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools