160-250mm Internal Micrometer With Carbide Measuring Faces, 0.015mm Accuracy - Microtech Metrology
€920.00
Product information "160-250mm Internal Micrometer With Carbide Measuring Faces, 0.015mm Accuracy - Microtech Metrology"
Take advantage of precision to ±0.015 mm, a 0.01 mm reading resolution and wear‑resistant tungsten carbide measuring faces for reliable bore inspection. Order the internal measuring solution directly via Metav Werkzeuge or consult our specialists for application advice.
Internal bore gauge — analogue instrument with 0.01 mm reading and carbide measuring faces (Microtech Metrology)
The internal bore gauge is a precision analogue instrument for fast and repeatable internal diameter checks in workshop inspection and production environments, covering the 160–250 mm measuring range.
- Precision ±0.015 mm
- 0.01 mm reading resolution
- Tungsten carbide measuring faces
- Measurement range 160–250 mm
Achieve consistent tolerance control with industrial-level precision
The gauge delivers a measured accuracy of ±0.015 mm, combined with a 0.01 mm reading increment, which supports dependable process control and reduces the need for repeated rework. In practice, the fine resolution enables clear pass/fail decisions during routine quality checks and dimensional inspections, while the documented accuracy helps to integrate results into quality records and inspection plans.
Durable contact surfaces for extended service life
Equipped with tungsten carbide measuring faces, the instrument maintains consistent contact geometry even under frequent use on harder materials. The wear‑resistant faces lower measurement drift over time and sustain repeatability in serial inspections, making the gauge suitable for abrasive or mixed‑material production runs. The listed measuring depth 2000 mm indicates the instrument’s capability to reach deeper bores or recessed features when paired with appropriate extensions.
Designed for workshop integration and straightforward measurement routines
Operating as an analogue device with a fine reading layout, the gauge fits seamlessly into standard inspection workflows where electrical interfaces are not required. Its measurement range 160–250 mm corresponds to the standard workshop category, offering the best balance of reach, stiffness and ease of handling for components such as housings, sleeves and medium‑sized bores. The instrument’s mechanical concept supports repeatable readings with minimal setup time, improving throughput during batch sampling.
Contact Metav Werkzeuge for tailored delivery from Emmerich or for technical guidance on applying Microtech Metrology’s internal bore gauge in specific inspection routines — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: 132250144
- GTIN: 4061905453908
- ECLASS: 21170310
Facts
- Accuracy: ±0.015 mm
- Reading: 0.01 mm
- Measuring range: 160–250 mm
- Measuring depth: 2000 mm
Special features
- Analogue instrument with fine reading layout
- Tungsten carbide measuring faces
- Suitable for internal diameter inspection
- Analog vernier/dial style operation
FAQ
What is the guaranteed accuracy of the internal bore gauge?
The instrument achieves an accuracy of ±0.015 mm as specified for the internal bore gauge from Microtech Metrology (SKU 132250144).
Which measurement range does the gauge cover?
The gauge covers a measuring range of 160–250 mm, corresponding to the standard workshop range for medium‑sized bore inspections.
Are the measuring faces suitable for abrasive materials?
Yes, the gauge features tungsten carbide measuring faces that are wear‑resistant and appropriate for repeated measurements on harder or abrasive workpieces.
Can the instrument be used for deep bores?
The specified measuring depth of 2000 mm indicates suitability for deeper or recessed bores when used with compatible extensions or fixtures.
Is the reading suitable for routine quality control?
With a 0.01 mm reading increment and ±0.015 mm accuracy, the instrument is well suited for routine inspection and sampling in production environments.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools