160–250mm Internal Micrometer With Carbide Measuring Faces 0.005mm Accuracy - Microtech Metrology
€920.00
Product information "160–250mm Internal Micrometer With Carbide Measuring Faces 0.005mm Accuracy - Microtech Metrology"
Take advantage of the combination of 0.005 mm accuracy, carbide measuring faces and a 160–250 mm standard range to increase measurement reliability in daily workshop and quality‑control routines. Order the instrument directly via Metav Werkzeuge or consult our specialists for dimensioning and delivery options.
Internal precision gauge — internal fine measuring instrument, 160–250 mm range, 0.005 mm accuracy (Microtech Metrology)
The internal precision gauge is an analogue fine measuring instrument designed for accurate internal measurements in machine‑shop and inspection environments, suitable for components within the standard 160–250 mm range.
- High precision 0.005 mm accuracy
- Carbide measuring faces for wear resistance
- Measuring depth 1000 mm for deep bores
- Standard range: 160–250 mm, workshop ready
Precise measurement where tolerances matter
The instrument delivers an uncompromising level of dimensional control with a specified accuracy of 0.005 mm (5 µm). Built as an analogue fine measuring tool, it combines a robust mechanical feel with a finely graduated readout to support repeatable checks on internal diameters. The carbide measuring faces provide long‑term resistance to wear, which stabilises results over many measuring cycles. This combination of precision and durability reduces rework and supports consistent production output.
Designed for deep and confined measurements
With a measuring depth of 1000 mm, the gauge is suitable for long bores and recessed features where standard calipers cannot reach reliably. The instrument’s construction emphasises rigidity and guidance to minimise deflection during measurement, ensuring that readings remain consistent along the full reach. Classified in the Standard length bracket (100–300 mm range), it offers the best compromise between reach and handling for general metalworking and fixture inspection tasks.
Workflow advantages and practical handling
Analogue operation provides tactile feedback and straightforward integration into existing inspection routines; the mechanical design avoids complex electronics while offering high resolution and dependable behaviour in workshop conditions. The choice of wear‑resistant carbide faces means fewer service intervals and lower lifetime cost for frequently used gauges. Where a documented quality trail is required, Metav Werkzeuge can advise on calibration and traceability options to match internal quality procedures.
Fit for shop floor and quality labs
This fine measuring instrument suits machining, toolmaking and quality control applications that require tight internal tolerances. Its combination of robust carbide contacts, stable analogue measurement and extended reach makes it an efficient tool for repeat inspection tasks and set‑up checks on assemblies. Backed by Metav’s logistics and product range, the gauge fits into a supply chain that prioritises availability and consistent product quality.
For precision projects that demand 5 µm accuracy, contact Metav Werkzeuge to discuss the Microtech Metrology internal precision gauge and arrange supply or calibration advice.
Technical Data
- Article number: 132250822
- GTIN: 4061905453748
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 160–250 mm
- Accuracy: 0.005 mm
- Reading / resolution: 0.001 mm
- Measuring depth: 1000 mm
- Analogue instrument: yes
Special features
- Carbide measuring faces
- Category: Fine measuring instruments
- ECLASS: 21170310
FAQ
What accuracy can be expected from this internal measuring instrument?
The Microtech Metrology internal precision gauge (SKU 132250822) is specified with an accuracy of 0.005 mm, providing repeatable measurements suitable for workshop and inspection tasks.
Is this instrument suitable for deep bores and recessed features?
Yes, the gauge has a measuring depth of 1000 mm, making it appropriate for deep bores where standard calipers cannot reach; the extended reach is designed to maintain stability along its length.
What contact material do the measuring faces use and why is it relevant?
The measuring faces are made of carbide, which increases wear resistance and preserves measuring accuracy over many cycles—particularly useful in production environments with frequent checks.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools