250-450mm Internal Micrometer Carbide Faces 0.01mm Graduation, 260mm Depth - Microtech Metrology
€229.00
Product information "250-450mm Internal Micrometer Carbide Faces 0.01mm Graduation, 260mm Depth - Microtech Metrology"
Take advantage of wear‑resistant carbide measuring faces and a 250–450 mm medium range to measure internal bores and recesses with repeatable precision; order directly via Metav Werkzeuge or consult our specialists for application advice.
Internal fine measuring instrument — analogue internal gauge with carbide measuring faces (Microtech Metrology)
The Internal fine measuring instrument is an analogue inside gauge designed for medium‑range workshop and toolroom measurements, intended for repeatable internal dimension checks on assemblies and bore features.
- Analogue display with 0.01 mm reading
- Accuracy ±0.022 mm for repeatable results
- Carbide measuring faces for wear resistance
- Measurement range 250–450 mm (medium category)
Precision that supports reliable quality control
The instrument delivers a 0.01 mm reading combined with a verified accuracy of ±0.022 mm, which translates into reliably reproducible results for routine inspection tasks. In practical terms, the tolerance figure describes the maximal deviation expected under standard measuring conditions; this level of precision suits workshop‑level quality control and toolroom verification where consistent repeatability is required. The analogue vernier arrangement maintains measurement continuity without reliance on electronics, reducing complexity in the measuring workflow while providing a clear, tactile feedback on positioning.
Built for medium‑range internal measurements and robust use
Classified as a medium measuring instrument (measurement range 250–450 mm), this gauge balances reach and stiffness for common components such as housings, bearing seats and larger bores. The measuring depth of 260 mm enables access into deeper recesses while preserving handling stability, and the carbide measuring faces limit wear at the contact points, extending service life in serial inspection environments. The robust contact surfaces reduce the need for frequent replacement, supporting continuous shopfloor operation and lowering lifetime maintenance effort.
Straightforward handling, maintenance and workshop integration
The analogue construction favours simplicity: the mechanism is intuitive to operate and requires only routine cleaning and occasional lubrication to retain smooth travel. The instrument’s mechanical design supports rapid, tactile measurements without data conversion overhead; this is beneficial where immediate assessment and quick decision‑making are priorities on the shop floor. For customers requiring documented traceability or integration into formal quality systems, Metav Werkzeuge can advise on calibration options and complementary accessories to fit inspection routines while maintaining process reliability.
Contact Metav Werkzeuge in Emmerich for tailored advice on suitability, calibration options and availability of the Microtech Metrology internal gauge
Technical data
- SKU: 132450100
- GTIN: 4061905453915
- Manufacturer: Microtech Metrology
- ECLASS: 21170310
Core measurements
- Measurement range: 250–450 mm
- Measuring depth: 260 mm
- Reading / resolution: 0.01 mm
- Stated accuracy: ±0.022 mm
Materials & features
- Analogue instrument (vernier style)
- Carbide measuring faces
- Type: internal fine measuring instrument
- Category: Medium range internal gauge
FAQ
What measurement range does the internal fine measuring instrument cover?
The internal fine measuring instrument covers a 250–450 mm range, which places it in the medium category suitable for many workshop‑level internal measurements.
How precise is the instrument in practical use?
The device provides a 0.01 mm reading with a stated accuracy of ±0.022 mm, offering repeatable results for standard inspection tasks on internal features.
Are the measuring faces durable for serial inspection?
Yes, the gauge is fitted with carbide measuring faces, which increase wear resistance and extend the service life under frequent contact conditions.
Can this analogue gauge reach deep recesses?
With a measuring depth of 260 mm, the instrument is capable of accessing deeper bores and recesses common in housings and larger assemblies.
Is the instrument suitable for a production quality‑control environment?
The combination of repeatable accuracy and robust contact surfaces makes the instrument well suited for workshop and production‑level quality control; Metav Werkzeuge can advise on calibration and process integration.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools