18-450mm Internal Precision Bore Gauge Set With Carbide Measuring Faces, 0.01mm Resolution - Microtech Metrology
€475.00
Product information "18-450mm Internal Precision Bore Gauge Set With Carbide Measuring Faces, 0.01mm Resolution - Microtech Metrology"
Take advantage of high repeatability and a wide coverage from 18–450 mm, combined with carbide measuring faces for long-term wear resistance and stable results. Order the set directly via Metav Werkzeuge or consult our specialists for application advice.
Internal Precision Bore Gauge Set — analogue dial, carbide measuring faces (Microtech Metrology)
The Internal Precision Bore Gauge Set is an analogue inside-measuring set intended for internal diameter inspection in workshop and quality‑control environments, offering a modular 18–450 mm measuring span with extended reach options.
- Wide 18–450 mm range
- Carbide measuring faces for durability
- Analogue dial with 0.01 mm reading
- Suitable for mid-range component inspection
Reliable measurement accuracy for routine quality checks
The set delivers a resolution of 0.01 mm and a nominal accuracy of ±0.022 mm, values that support routine dimensional control in machine building and component manufacture. The analogue dial indicator provides an immediate visual result without reliance on electronics, enabling fast comparative checks and pass/fail assessment at the bench. Classified as a mid-range instrument (300–500 mm category), this modular set balances reach and stiffness so that repeatable internal measurements are achievable across a wide range of bore sizes.
Modular design and application reach for efficient workflows
Supplied as a set that covers the full 18–450 mm span, the instrument is configured to address typical workshop tasks from small bores up to larger housings. The documented measuring depth of 130–2000 mm allows inspection of components with substantial internal depth when used with appropriate extension elements. Carbide measuring faces reduce wear and maintain measurement integrity under frequent use, which lengthens service intervals and supports consistent process control in production and inspection areas.
Practical robustness and where this instrument fits
Being an analogue internal measuring instrument means reduced dependency on batteries and simpler maintenance routines, attributes appreciated in busy shop-floor settings. The construction and components are aimed at everyday metrology in production, toolmaking and fixture assembly where dependable comparative measurement and quick verification are required. As a precision measuring set from Microtech Metrology, it is positioned for inspectors and machinists who need a durable, mid-range solution that integrates easily with existing quality workflows.
Choose the Microtech Metrology internal measuring set for dependable bore checks and contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply: info@metav-werkzeuge.com | +49 2822 7131930
Technical Data
- Article number: 132450105
- GTIN: 4061905454073
- Manufacturer: Microtech Metrology
Facts
- Measurement range: 18–450 mm
- Measuring depth: 130–2000 mm
- Resolution: 0.01 mm
- Accuracy: ±0.022 mm
Special features
- Carbide measuring faces
- Analogue dial reading
- Supplied as a set
- Category: Precision measuring instruments
FAQ
What measuring range does this set cover?
The internal precision bore gauge set covers a measuring span from 18 to 450 mm, supplied as a set to bridge small and mid-range internal diameters.
What resolution and accuracy can be expected?
Resolution is 0.01 mm with a nominal accuracy of ±0.022 mm, suitable for routine workshop inspection and quality control tasks.
Are the measuring faces wear-resistant?
Yes, the instrument is fitted with carbide measuring faces to improve wear resistance and prolong stable measurement performance.
Can it inspect deep bores and recesses?
The set supports measuring depths between 130 and 2000 mm, enabling checks in components with extended internal reach when used with compatible extensions.
Is this set suitable for production and toolroom use?
The analogue design, durable measuring faces and mid-range coverage make the set appropriate for production, toolroom and fixture inspection activities.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools