250-450mm Internal Micrometer With Carbide Measuring Faces, 0.01mm Resolution - Microtech Metrology
€790.00
Product information "250-450mm Internal Micrometer With Carbide Measuring Faces, 0.01mm Resolution - Microtech Metrology"
Benefit from precise medium‑range bore measurement thanks to the combination of a 0.01 mm dial resolution, carbide measuring faces and a long 1,000 mm measuring depth for stable readings on larger assemblies; order directly via Metav Werkzeuge or consult our specialists for application advice.
Internal bore gauge – dial indicator, 250–450 mm (Microtech Metrology)
The internal bore gauge is a dial‑indicator instrument for accurate internal diameter checks in workshop inspection and production control.
- Dial resolution 0.01 mm
- Accuracy ±0.022 mm
- Carbide measuring faces
- Measuring range 250–450 mm
- Measuring depth 1,000 mm
Reliable precision for medium‑range bores
This instrument is designed for medium‑range internal measurements, classified for the 300–500 mm category by its maximum range, which makes it ideal for fixture and mould components that require both reach and stiffness. The dial provides a 0.01 mm graduation combined with a verified accuracy ±0.022 mm, yielding repeatable comparative measurements that support quality control routines. The analogue readout and mechanical indicator simplify on‑the‑spot evaluations without reliance on batteries or electronics.
Durable contact geometry for repeatable results
The gauge features carbide measuring faces that resist wear under frequent use, maintaining contact geometry and reducing drift over time. Hardened contact surfaces are particularly beneficial when measuring ferrous or abrasive materials, as the tool preserves its measuring edges and therefore measurement integrity. This robustness reduces recalibration cycles and supports consistent documentation of internal diameters across production batches.
Practical handling and extended reach for deep bores
With a measuring range of 250–450 mm and a measuring depth of 1,000 mm, the instrument is suited to larger internal diameters while remaining manoeuvrable for workshop environments. The extended reach allows access to recessed bores and assemblies where standard short‑span instruments cannot measure reliably. The mechanical design balances reach with rigidity to keep deflection low, which helps achieve stable readings on longer spans.
Integration into inspection workflows and traceable results
As an analogue, dial‑based fine measuring device, this gauge integrates easily into inspection benches and documentation procedures where visual indication and manual verification are standard. The combination of a clear dial, robust contacts and measurable accuracy supports calibration records and traceable checks in production. For laboratories seeking consistent medium‑range internal measurement, the instrument provides a practical bridge between hand instruments and larger metrology systems.
Contact Metav Werkzeuge in Emmerich for tailored application advice on the Microtech Metrology internal bore gauge and to arrange rapid supply or calibration planning
Technical data
- Article number: 132450122
- GTIN: 4061905454004
- Manufacturer: Microtech Metrology
- Category: Fine measuring instruments
Facts
- Measuring range: 250–450 mm
- Resolution / reading: 0.01 mm
- Accuracy: ±0.022 mm
- Measuring depth: 1,000 mm
- Analogue (dial indicator)
Special features
- Carbide measuring faces
- Dial indicator (messuhr)
- Suitable for medium‑range bore measurement
- Robust design for workshop use
FAQ
What measurement range does the gauge cover?
The internal bore gauge covers a measuring range of 250–450 mm and is intended for medium‑range internal diameter checks.
How fine are the readings on the dial?
The instrument provides a dial resolution of 0.01 mm with an overall accuracy of ±0.022 mm for reliable comparative measurements.
Are the measuring faces wear‑resistant?
Yes, the gauge is fitted with carbide measuring faces to ensure durable contact points and prolonged stability under repeated use.
Can this instrument reach deep recesses?
The design includes a measuring depth of 1,000 mm, allowing measurements of recessed bores and deeper assemblies.
Which brand and article number should be referenced when ordering?
Reference Microtech Metrology internal bore gauge, Article number 132450122, when enquiring or ordering.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools