1500mm Internal Fine Measuring Gauge Carbide Measuring Faces, 440mm Depth, 0.025mm Accuracy - Microtech Metrology
€1,999.00
Product information "1500mm Internal Fine Measuring Gauge Carbide Measuring Faces, 440mm Depth, 0.025mm Accuracy - Microtech Metrology"
Take advantage of a long‑range measuring capability together with carbide measuring faces and fine analogue reading for reliable, repeatable bore inspections; the combination supports consistent quality control across large components. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice.
Internal fine measuring instrument — analogue internal bore gauge, 130–1500 mm range (Microtech Metrology)
A precision internal measuring instrument for extended bore and cavity measurement, designed for workshop and production environments where long‑reach accuracy and durable contact faces are essential.
- Analogue dial with 0.01 mm graduation
- Measuring range 130–1500 mm
- Carbide measuring faces for wear resistance
- 440 mm measuring depth for deep bores
Long‑reach accuracy that keeps production moving
The instrument delivers a readability of 0.01 mm with an accuracy of ±0.025 mm, giving a dependable balance between precision and operational speed for routine and batch inspections. As an analogue internal gauge, it translates fine movements into clear dial steps, enabling fast go/no‑go decisions on the shop floor. The combination of high resolution and repeatable mechanical staging reduces rework and inspection time, supporting efficient process control and traceable results.
Designed for long‑format measurements and stable handling
With a measuring span of 130–1500 mm, this device falls into the long format category; its geometry is optimised to preserve stiffness over extended lengths while remaining manageable for two‑person handling where necessary. A measuring depth of 440 mm allows access to deep bores and recesses otherwise difficult to verify, so large assemblies and heavy components can be checked without complex fixturing. The long‑range layout emphasises repeatability across the full travel rather than only at short lengths.
Durable contact surfaces for production environments
The gauge is fitted with carbide measuring faces, chosen for wear resistance and consistent contact geometry over repeated cycles. Carbide tips maintain measurement integrity where abrasive finishes or high throughput would quickly degrade softer contacts. The robust contact material lowers long‑term uncertainty and minimises maintenance intervals, which preserves inspection capacity and avoids unplanned downtime.
Practical application and integration into quality routines
Ideal for incoming inspection, in‑process checks and final verification of large bores, the instrument supports clear decision thresholds thanks to its fine dial graduation and sturdy construction. The compact analogue mechanism requires no battery, simplifying use in workshops and on assembly lines. For purchasers seeking a pragmatic balance between robustness and measurement quality, this internal gauge complements both manual inspection workflows and semi‑automated quality stations.
For tailored advice or to purchase the Microtech Metrology internal fine measuring instrument with 130–1500 mm range and carbide measuring faces, contact Metav Werkzeuge in Emmerich for application guidance and order processing.
Technical data
- SKU: 132951100
- GTIN: 4061905454059
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 130–1500 mm
- Measuring depth: 440 mm
- Readability: 0.01 mm
- Accuracy: ±0.025 mm
- Analogue dial indicator
Special features
- Carbide measuring faces
- Long format measuring range classification (1,000–2,000 mm)
- Suitable for deep bore inspection
FAQ
What accuracy can be expected from the instrument?
The internal fine measuring instrument from Microtech Metrology offers a stated accuracy of ±0.025 mm with a dial graduation of 0.01 mm for repeatable workshop control.
Is the gauge suitable for deep bores and long components?
Yes — the 130–1500 mm measuring span and 440 mm measuring depth make this gauge suitable for long and deep bore inspections on large components.
What benefit do the carbide measuring faces provide?
Carbide measuring faces on the Microtech Metrology internal gauge deliver enhanced wear resistance and stable contact geometry, reducing drift over high‑cycle use.
Can this analogue instrument be used on the shop floor without additional electronics?
The analogue dial requires no batteries or electronics, making it practical for direct shop‑floor use where simple, reliable readings are preferred.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools