50-75mm Dial Bore Gauge Digital IP65, 0.006mm Resolution, Ø12mm Measuring Faces - Microtech Metrology
€299.00
Product information "50-75mm Dial Bore Gauge Digital IP65, 0.006mm Resolution, Ø12mm Measuring Faces - Microtech Metrology"
Compact precision with robust protection: the combination of a digital readout, IP65 protection and a measuring range of 50–75 mm ensures reliable shop-floor performance and traceable results. Order the micrometer directly via Metav Werkzeuge or consult our specialists for application advice.
Micrometer 50–75 mm — digital micrometer, IP65, Microtech Metrology
A Micrometer 50–75 mm designed for accurate external measurements of shafts, bearings and medium-sized components in industrial and workshop environments.
- Digital display with 0.001 mm resolution
- IP65 dust and water resistant design
- High repeatability with 0.006 mm accuracy
Precision that pays off in production
The instrument delivers a reading resolution of 0.001 mm combined with a proven accuracy of 0.006 mm, which reduces measurement uncertainty in routine quality checks. The finely finished Ø12 mm measuring faces provide stable contact and consistent seating on curved or flat surfaces, improving repeatability during serial inspection. Such measurable precision supports more reliable process control and fewer downstream rejects, making the device a practical investment for machining and inspection tasks.
Easier measurement on the shop floor
A clear digital readout removes ambiguity from analogue reading and speeds up inspection sequences. The electronic display reads in steps of 0.001 mm, shortening cycle times and lowering the risk of transcription errors in quality records. The device’s robust electronics and intuitive interface mean operators can focus on efficient measurement rather than interpretation, increasing throughput without sacrificing accuracy.
Built for tough environments
Engineered to meet IP65 protection, the micrometer tolerates dust ingress and low-pressure water jets, which makes it suitable for busy workshop conditions where coolant mist, chips or fine dust are common. The sealed design protects the measuring system and prolongs service life, reducing maintenance intervals and contributing to dependable uptime in production environments.
Practical applications and documentation
With a measuring range from 50 to 75 mm, the instrument is suited to components such as medium-sized shafts, bearing journals and machined housings. The device is classified for industrial metrology tasks and integrates easily into standard inspection routines. Supplied data such as SKU 133800751 and GTIN support traceability and procurement workflows, while the digital format facilitates logging measurements into quality systems when required.
Contact Metav Werkzeuge for technical advice, availability and application support for the Microtech digital micrometer; email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- SKU: 133800751
- GTIN: 4061905458118
- Manufacturer: Microtech Metrology
- ECLASS: 21170328
Numbers / Core technical data
- Measuring range: 50–75 mm
- Resolution (display): 0.001 mm
- Stated accuracy: 0.006 mm
- Measuring faces diameter: Ø12 mm
- Protection class: IP65
Special features
- Digital readout
- Robust, sealed construction for workshop use
- Suited to external measurements of shafts and housings
- Category: micrometer (industrial measuring instrument)
FAQ
What measuring range does the instrument cover?
The micrometer covers a measuring range of 50–75 mm, suitable for medium-sized external measurements and workshop inspection tasks.
What accuracy and resolution can be expected?
The Microtech digital micrometer offers a resolution of 0.001 mm and a stated accuracy of 0.006 mm, ensuring precise and repeatable results for production checks.
Is the device protected for workshop environments?
Yes—the tool is rated IP65, making the electronics and measurement system resistant to dust ingress and low-pressure water jets common in industrial settings.
Can the measuring faces cope with curved surfaces?
The Ø12 mm measuring faces are designed to provide stable contact on both cylindrical and flat surfaces, improving repeatability during serial inspections.
How is the product identified for procurement and traceability?
The item is listed under SKU 133800751 with GTIN 4061905458118, which supports ordering and quality-system documentation.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools