10mm Digital Thickness Gauge For Soft Materials 0.001mm Resolution, DIN EN 1849-2 - Microtech Metrology
€515.00
Product information "10mm Digital Thickness Gauge For Soft Materials 0.001mm Resolution, DIN EN 1849-2 - Microtech Metrology"
Combine compact dimensions, a 0–10 mm measuring range and fine 0.01 mm accuracy for reliable thickness checks of delicate materials; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice.
Microtech Thickness Gauge — Digital thickness gauge, 0–10 mm range, 0.01 mm accuracy
The Microtech Thickness Gauge is a compact digital instrument for precise thickness measurement of flexible and delicate sheets in workshop and laboratory settings.
- Digital display with 0.01 mm resolution
- Measuring range 0–10 mm for micro applications
- Ø10 mm measuring faces for soft materials
- Compliant with DIN EN 1849-2 standard
Precision tailored to micro applications
The instrument delivers a clear balance between fine resolution and practical accuracy: 0.001 mm resolution on the display combined with an indicated 0.01 mm accuracy provides reproducible readings for small tolerances. The 0–10 mm range classifies this tool in the micro segment, optimised where short measuring spans demand high stiffness and repeatability. Conformity with DIN EN 1849-2 documents the manufacturing and functional requirements relevant to thickness measurement, supporting consistent quality control procedures.
Designed for delicate materials and repeatable checks
Classified as a micro instrument, this thickness gauge is suitable for tasks such as measuring flexible sheets, waterproof films and other soft substrates where larger instruments would risk deformation. The digital display and fine readout reduce interpretation errors and speed up routine inspections, enabling faster decision-making in production and QC workflows. As a result, fewer reworks and clearer pass/fail decisions are achievable with minimal operator training.
Gentle contact and practical handling for everyday use
A measured contact force of 1.57 N keeps the measuring action gentle enough to avoid marking sensitive surfaces while ensuring stable contact for repeatable readings. The Ø10 mm measuring faces concentrate contact area appropriately for thin samples, delivering consistent results across the gaugeable surface. Compact form factor and straightforward operation make the device easy to integrate into bench testing, incoming inspection or research tasks, while the documented compliance with standards supports traceable measurement routines. Metav’s supply chain presence ensures prompt availability and technical guidance for integration into workshop toolkits.
For a practical consultation on integrating the Microtech Thickness Gauge into measurement routines, contact Metav Werkzeuge GmbH in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to request tailored advice or a technical specification sheet.
Technical data
- Article number: 137331208
- GTIN: 4061905454363
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–10 mm
- Resolution (display): 0.001 mm
- Accuracy: 0.01 mm
- Measuring force: 1.57 N
- Measuring faces: Ø10 mm
Special features
- Digital instrument
- Complies with DIN EN 1849-2
- Suitable for flexible and waterproof sheets
- Compact format for micro measurements
FAQ
What measuring range does the gauge offer?
The gauge provides a measuring range of 0–10 mm, making it suitable for micro measurements and small components.
What are the resolution and accuracy specifications?
The Microtech Thickness Gauge features a display resolution of 0.001 mm with an indicated accuracy of 0.01 mm for routine thickness checks.
Is the instrument suitable for soft or flexible materials?
Yes, the device is designed for flexible and delicate sheets; the Ø10 mm measuring faces and a contact force of 1.57 N help avoid surface damage.
Does the gauge comply with industry standards?
The instrument is compliant with DIN EN 1849-2, which covers requirements for thickness measurement devices of this type.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools