10mm Thickness Gauge Digital, 0.001mm Resolution, ISO 3034, For Corrugated Fibreboard - Microtech Metrology
€650.00
Product information "10mm Thickness Gauge Digital, 0.001mm Resolution, ISO 3034, For Corrugated Fibreboard - Microtech Metrology"
Take advantage of the combination of high-resolution reading, compact 0–10 mm range and ISO 3034 conformity for reliable thickness control of soft and textured materials; order supply or request technical advice via Metav Werkzeuge for smooth integration into inspection workflows.
Microtech Metrology Thickness Gauge — Digital, 0–10 mm range
Microtech Metrology Thickness Gauge provides high-resolution thickness measurement for soft and structured materials in laboratory and workshop environments
- Digital thickness gauge 0–10 mm range
- Resolution 0.001 mm for fine reading
- Accuracy ±0.02 mm according to ISO 3034
- 20 N measuring force with Ø35.7 mm face
Precision for fine tolerances and textured surfaces
The instrument is built for measurements where small deviations matter: with a measurement range of 0–10 mm and a resolution of 0.001 mm (1 µm) the device makes subtle thickness changes visible. The specified accuracy of ±0.02 mm supports reproducible decisions in quality control; the compliance with ISO 3034 documents the applied standard for repeatable mechanical thickness measurement. These parameters translate directly into fewer rejects and better process control when inspecting thin laminates, foils or textured boards.
Robust contact and consistent measuring force for soft materials
A defined contact pressure is essential for repeatable results on compliant workpieces. The gauge applies a stable measuring force of 20 ± 0.5 N to a Ø35.7 mm measuring face, which spreads load and reduces local indentation on soft surfaces. The digital readout offers immediate numeric values and reduces interpretation errors compared with analogue dials. Together, these features ensure reliable thickness values on wavy fibreboards and similar substrates while simplifying routine measurements on the shop floor.
Traceability and workshop fit for inspection routines
Traceability is supported through clear identification: SKU 137331209 and GTIN 4061905454370 assist inventory and calibration records. The compact form factor suits bench-top or fixture-based inspection and can be integrated into incoming goods checks or process spot checks. The device balances fine measurement capability with practical workshop handling to reduce measurement time and raise throughput, making it a pragmatic choice for small-batch production and detailed QA tasks.
Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology thickness gauges into inspection routines—technical specialists in Emmerich provide specification guidance and supply coordination.
Technical data
- SKU: 137331209
- GTIN: 4061905454370
- Category: Dial gauges (measuring instruments)
- Digital: yes
Facts
- Measurement range: 0–10 mm
- Resolution / reading: 0.001 mm
- Accuracy: ±0.02 mm
- Measuring force: 20 ± 0.5 N
- Measuring face diameter: Ø35.7 mm
- Standard: ISO 3034
Special features
- Suitable for wavy fibreboards
- Without timer
- Digital display for direct readings
- Manufacturer: Microtech Metrology
FAQ
What measurement range and resolution does the thickness gauge offer?
The Microtech Metrology thickness gauge provides a 0–10 mm range with a 0.001 mm (1 µm) resolution, enabling fine differentiation in thin materials.
How accurate are the measurements and which standard applies?
Measurements are specified at ±0.02 mm accuracy and the instrument is designed and referenced to ISO 3034 for consistent mechanical thickness testing.
Is the gauge suitable for soft or textured boards?
Yes; the gauge’s measuring face and defined 20 ± 0.5 N force are intended for compliant substrates, making it suitable for textured and wavy fibreboards.
What identifiers support traceability in production records?
Traceability is supported by SKU 137331209 and GTIN 4061905454370, which facilitate calibration and inventory documentation for the digital thickness gauge.
Does the instrument provide analogue or digital readout?
The device features a digital readout for unambiguous numeric values and faster recording compared with analogue indicators.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools