70-160mm Internal Bore Indicator With Retractable Probe Digital, ISO 17025 Calibrated - Microtech Metrology
€3,150.00
Product information "70-160mm Internal Bore Indicator With Retractable Probe Digital, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of traceable laboratory calibration and high-resolution reading for reproducible internal measurements; the combination of ISO 17025 certification, a 70–160 mm measuring range and 0.001 mm resolution supports dependable in-process inspection and quality assurance. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice and delivery options.
Internal fine measuring instrument — digital internal bore gauge, 70–160 mm (Microtech Metrology)
The Internal fine measuring instrument is a digital bore gauge intended for precise internal diameter checks in quality control, toolmaking and precision engineering applications.
- Digital readout 0.001 mm resolution
- ISO 17025 calibrated with certificate
- Measuring range 70–160 mm
- Retractable measuring head for bore access
Precision that supports decisive quality checks
The instrument delivers a measured accuracy of ±0.035 mm combined with a 0.001 mm display resolution, enabling clear, quantifiable decisions on acceptance limits and process adjustments. The digital readout reduces reading errors and accelerates inspection steps compared with analogue alternatives; numerical values can be noted directly and used to evaluate process capability. As the device is supplied fully calibrated to ISO 17025, traceability is ensured and a calibration certificate is included for audit and documentation purposes.
Designed for deep bores and hard-to-reach features
A retractable measuring head provides access to bores where space is restricted, while the specified measuring range 70–160 mm covers medium-sized internal diameters typical in bearings, housings and mould components. The instrument also specifies a measuring depth of 3,000 mm, which supports measurements in long shafts or assemblies with extended bore access. These design choices reduce the need for specialised fixtures and speed up inspection cycles in the workshop or metrology lab.
Workflow benefits: reproducibility, speed and fit for shop use
The combination of stable mechanical sensing and a high-resolution digital display supports reproducible results across repeated checks and operators. The instrument is suited to routine quality-control tasks where consistent documentation and fast readout are priorities; reduced measurement uncertainty helps to avoid costly rework. Delivered ready for use with an accredited calibration certificate, the device fits seamlessly into a quality-assurance regime without added setup overhead.
For accredited internal diameter measurement and ISO 17025 traceability, request Microtech Metrology’s calibrated instrument through Metav Werkzeuge in Emmerich for technical clarification and reliable delivery
Technical Data
- Article number: 139160833
- GTIN: 4061905046322
- Manufacturer: Microtech Metrology
Facts
- Resolution: 0.001 mm
- Accuracy: ±0.035 mm
- Measuring range: 70–160 mm
- Measuring depth: 3,000 mm
- Digital: yes
Special features
- Retractable measuring head
- Digital readout
- ISO 17025 calibration with certificate
- Category: Fine measuring device
FAQ
Is the instrument delivered calibrated to an accredited standard?
Yes. The Internal fine measuring instrument is supplied fully calibrated to ISO 17025 and includes an official calibration certificate for traceability and audit purposes.
What is the usable measuring range and maximum bore depth?
The instrument covers internal diameters from 70 to 160 mm and specifies a measuring depth of up to 3,000 mm for extended bore access.
What resolution and accuracy can be expected during routine checks?
Display resolution is 0.001 mm and stated accuracy is ±0.035 mm, suitable for workshop quality-control and precision engineering tasks.
Is the design appropriate for repetitive production inspections?
The retractable measuring head and digital readout support rapid, repeatable measurements and straightforward documentation, making the instrument well suited to production inspection routines.
Which SKU and manufacturer details identify this product?
SKU 139160833 identifies the instrument; the manufacturer is Microtech Metrology.
Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools