160-250mm Internal Micrometer With Retractable Anvil, Digital, ISO 17025 Calibrated - Microtech Metrology
€1,490.00
Product information "160-250mm Internal Micrometer With Retractable Anvil, Digital, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the combination of digital readout, ISO 17025 calibration certificate, and a practical 160–250 mm measuring range for reliable internal inspections; order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific guidance.
Internal Precision Bore Gauge (digital) — Microtech Metrology, 160–250 mm range, ISO 17025 calibrated
The Internal Precision Bore Gauge is a digital internal measuring instrument intended for accurate inspection of bores, recesses and internal features in workshop and quality-control environments.
- Digital display with 0.001 mm resolution
- ISO 17025 full calibration certificate included
- Measuring range 160–250 mm for workshop control
Traceable accuracy for repeatable quality control
This instrument delivers reliable measurement results thanks to its specified 0.03 mm accuracy and fine display step of 0.001 mm resolution. The difference between these two values is important: the resolution defines the smallest increment shown on the digital readout, while the stated accuracy describes the measurement uncertainty under defined conditions. Supplied with an ISO 17025 calibration certificate, the device supports traceable process control and documentation for audits.
Designed for practical workshop and metrology use
With a measuring range of 160–250 mm, the gauge falls into the Standard category used throughout machine shops and metalworking quality control, offering an efficient balance of reach and stiffness. The retractable measuring head simplifies access into bores and internal features while the compact electronics and clear digital readout reduce reading errors, making routine inspections faster and less dependent on operator interpretation.
Measurement depth and handling for extended applications
The instrument features a measuring depth of 2000 mm, enabling checks in deeper cavities and assemblies where surface access is limited. The carefully engineered retractable head and robust construction ease handling during repetitive checks, improving throughput in production or inspection routines and lowering the probability of handling-induced deviations.
Built for inspectors who demand documentation and conformity
Delivered fully calibrated to ISO 17025, the product includes a calibration certificate that documents conformity to international standards, simplifying incoming inspection and quality records. The combination of digital measurement, traceable calibration and a workshop-oriented measuring range supports efficient decision-making and reduces rework by providing trusted measurement data at the point of inspection.
For application advice or to order the Microtech Metrology Internal Precision Bore Gauge, contact Metav Werkzeuge — our specialists in precision tools will assist with selection and delivery from Emmerich to your shop floor.
Technical Data
- Article number: 139250822
- GTIN: 4061905044724
- Brand: Microtech Metrology
- Digital: yes
Core specifications
- Measuring range: 160–250 mm
- Resolution: 0.001 mm
- Specified accuracy: 0.03 mm
- Measuring depth: 2000 mm
Features & functions
- Retractable measuring head
- Digital readout
- ISO 17025 calibration certificate included
FAQ
What materials and applications suit this internal gauge?
The Internal Precision Bore Gauge from Microtech Metrology is intended for general workshop and quality-control inspection of internal features such as bores and recesses; it is suitable for a wide range of metallic and non-metallic components typically measured in machine shops.
Is the gauge supplied calibrated and documented?
Yes — the instrument is delivered fully calibrated with an ISO 17025 calibration certificate, ensuring traceability and conformity for quality systems.
How fine is the display and what does the accuracy mean in practice?
The digital display shows 0.001 mm increments; the stated accuracy of 0.03 mm represents the expected measurement uncertainty under standard conditions and should be considered when defining inspection tolerances.
Can the instrument be used for deep internal measurements?
Yes — the unit has a measuring depth of 2000 mm, which allows verification of deeper bores or components where extended reach is required.
Which SKU should be referenced when ordering or requesting documentation?
Please refer to SKU 139250822 and the Microtech Metrology designation when placing orders or requesting the calibration certificate.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Take advantage of direct, driver‑free data capture and simple one‑press recording to speed up measurement workflows; the cable’s USB HID interface and 2 m length ensure flexible integration with existing inspection software. Order this accessory through Metav Werkzeuge or consult the Metav team for compatibility advice. USB HID Data Cable – for Certi Met Digital Calipers and Indicators (Microtech Metrology) USB HID Data Cable enables direct keyboard‑style transfer of measurement values from Certi Met instruments into customer applications, ideal for production and inspection environments. USB HID for direct keyboard-style data transfer Integrated data button for one-press capture 2 m cable length for flexible workstation use Compatible with Certi Met digital calipers and indicators Faster, error‑resistant data capture for quality control The USB HID interface provides a driver‑free, keyboard‑emulation connection that sends measurement values directly into spreadsheets and inspection software, removing manual transcription. The integrated data button offers immediate, single‑action capture and reduces the risk of typing errors or transcription delays. For routine quality control tasks and statistical process control, this reliable signal path shortens cycle times while maintaining traceable digital records. The design is focused on measurable productivity gains rather than decorative extras. Robust connection tailored to metrology workflows Engineered as an accessory for industry‑grade measuring instruments, the connection lead is specified for use with Certi Met digital calipers and digital indicators rated to IP54, ensuring compatibility with workshop conditions where splash and dust resistance matter. The 2 m length provides practical reach between inspection benches and PC terminals without compromising cable management. The interface operates in standard HID mode, meaning no special drivers are required on the host system, which simplifies deployment across multiple stations and reduces IT overhead. Simple integration into existing data chains The cable’s keyboard emulation makes it compatible with legacy systems and modern applications alike: captured figures appear where the cursor is placed, enabling straightforward input to spreadsheets, measurement logs or custom software. The accessory supports a single‑button workflow for rapid series capture and is particularly suitable for production lines, inspection benches and maintenance stations where repeated measurement logging is needed. By converting manual entry into automated keystrokes, the accessory contributes to higher data integrity and a more efficient measurement routine. For seamless integration with Microtech Metrology Certi Met instruments, contact Metav Werkzeuge to confirm compatibility and order the correct cable; Metav’s team in Emmerich can advise on stock and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Manufacturer: Microtech Metrology Specifications Cable length: 2 m Buttons: 1 (data capture) Special features Direct keyboard‑style data transfer Integrated data button for immediate capture Compatible with Certi Met digital calipers and indicators (IP54) HID keyboard mode for driver‑free operation Suited for input into spreadsheets and standard inspection software FAQ Is this cable compatible with all Certi Met digital instruments? The cable is designed for Certi Met digital calipers and Certi Met digital indicators (both IP54 rated); compatibility with other models should be checked against the instrument's interface specifications. Does the connection require special drivers? No special drivers are required: the USB HID Data Cable operates in keyboard (HID) mode, so captured values are sent as standard keystrokes to the host application. Can the cable be used with custom measurement software? Yes, provided the software accepts keyboard input; the USB HID Data Cable transmits values to whichever field is active, allowing integration with bespoke or commercial inspection programs. What is the effective cable length and does it support bench setups? The lead is 2 m long, offering practical reach for typical bench and workstation layouts while keeping cable routing manageable. What is the article number for ordering or inventory? The article number (SKU) for this Microtech Metrology USB HID data cable is 141083000. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools