250-450mm Internal Digital Bore Gauge With Retractable Probe, ISO 17025 Calibrated - Microtech Metrology
€3,300.00
Product information "250-450mm Internal Digital Bore Gauge With Retractable Probe, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the combination of wide measuring range, consistent accuracy ±0.03 mm and delivery calibrated to ISO 17025 for dependable in‑line inspection and reduced rework. Order directly via Metav Werkzeuge or consult our specialists for application advice.
Internal Fine Measuring Gauge by Microtech Metrology — Digital, 250–450 mm
The Internal Fine Measuring Gauge is a digital instrument for precise internal measurements in workshop and inspection environments, designed for bore, step and recess control.
*Digital internal gauge with retractable head *Measurement range 250–450 mm *Accuracy ±0.03 mm for consistent results *Delivered calibrated to ISO 17025
Reliable accuracy to reduce scrap and rework
The instrument delivers consistent accuracy ±0.03 mm, making it suitable for production control where repeatable internal measurements matter. The precise reading capability supports reliable pass/fail decisions and helps to reduce costly rework cycles. Built with a bright digital display, the system shortens inspection time compared with manual indication methods while maintaining traceable measurement results that integrate into existing quality procedures.
Extended reach for larger bores and assemblies
Designed for internal measurement tasks across medium‑sized components, the unit covers a measurement range of 250–450 mm, corresponding to a medium class gauge ideal for fixtures, housings and larger machined parts. The retractable measuring head and a measurement depth of 2000 mm allow access into deep bores and stepped geometries, so long, slender internal features can be inspected without complex adaptation. This reach simplifies handling within repetitive inspection routines and supports efficient shop‑floor throughput.
Calibration and traceability for quality systems
Delivered fully calibrated to ISO 17025, the gauge includes a calibration certificate that documents traceability for audits and supplier quality requirements. The certification ensures the device can be integrated directly into formal inspection plans and supports documented evidence for conformity assessments. Supplied by Microtech Metrology, the instrument is intended to align measurement practice with production quality goals and to support consistent decision making under quality management systems.
Contact Metav Werkzeuge for tailored calibration documentation and delivery from Emmerich—call or email for precise technical guidance and ordering assistance
Technical data
- Article number: 139450822
- GTIN: 4061905046629
- Brand: Microtech Metrology
- Digital: yes
- Calibrated: ISO 17025 (certificate included)
Facts
- Measurement range: 250–450 mm
- Accuracy: ±0.03 mm
- Measurement depth: 2000 mm
- SKU: 139450822
Special features
- Retractable measuring head
- Digital readout
- Category: precision measuring instrument (Feinmessgeräte)
- Eclass: 21170310
FAQ
How precise is the instrument for internal checks?
The Internal Fine Measuring Gauge provides an accuracy of ±0.03 mm, suitable for consistent internal inspections and process control.
Is the gauge ready for use upon delivery?
Yes, the device from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate integration into quality workflows.
What internal diameters can be measured?
The instrument covers a measurement range of 250–450 mm, designed for medium‑sized bores and components in production and inspection environments.
Can deep bores be inspected with this gauge?
With a measurement depth of 2000 mm and a retractable measuring head, long internal features and deep bores can be accessed and measured reliably.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools