20-520mm Digital Precision Caliper Three-Point Measurement Swiss Digit 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
€1,090.00
Product information "20-520mm Digital Precision Caliper Three-Point Measurement Swiss Digit 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology"
Benefit from laboratory-grade assurance and workshop-ready protection: ISO 17025 calibration with certificate, IP67 ingress resistance and a clear Swiss Digit 11 mm display ensure reliable readings across the full 20–520 mm range. Combine traceable accuracy and durable design for consistent inspection results — order via Metav Werkzeuge or consult our specialists for application advice.
Digital Caliper — Microtech Metrology, ISO 17025 calibrated, IP67, Swiss Digit display
A digital caliper built for inspection and workshop use, offering a broad measuring range and a readable Swiss Digit display for precise bore‑to‑bore and external measurements.
- ISO 17025 calibrated and delivered with certificate
- IP67-rated for dust and water protection
- Swiss Digit 11 mm display for clear readings
- Wide 20–520 mm measuring range
Traceable accuracy for quality control and production
The caliper is supplied fully ISO 17025 calibrated and delivered with a calibration certificate, which supports formal quality procedures and audit trails. With a stated accuracy of ±0.03 mm and a display resolution of 0.01 mm, the instrument bridges shop‑floor practicality and laboratory demands. This level of precision reduces rework and speeds decision‑making during incoming inspection or in‑process checks, while the documented calibration provides the traceability required by quality managers and inspection plans.
Robust engineering that tolerates workshop conditions
Designed for regular use in industrial environments, the unit carries an IP67 rating for reliable protection against dust and temporary immersion. The Swiss Digit 11 mm display improves readability under variable light, shortening measurement cycles and lowering operator fatigue. Supplied measuring cones Ø20 mm and Ø35 mm extend capability to bore and pitch‑circle checks without additional fixtures. Mechanical simplicity combined with sealed electronics yields low maintenance and consistent performance over extended service intervals.
Wide measuring range for larger components
With a measuring span from 20 to 520 mm, the instrument sits in the large‑range category suitable for medium to sizable components such as housings, clamps and assemblies where both reach and stiffness matter. The caliper’s geometry balances reach with handling stability, making it an effective choice when single‑instrument coverage reduces tool changes. This reduces process complexity and contributes to faster throughput when inspecting multiple part sizes.
Practical features that support efficient workflows
The digital readout offers instant numerical results that remove subjectivity from readings; the clear 0.01 mm resolution aids repeatability for serial checks. The unit is compact enough to be used handheld yet robust enough for routine bench use, and the delivered calibration certificate eliminates the need for immediate external verification before first use. For buyers seeking a balance of documented accuracy, durability and broad application scope, this measuring instrument delivers a pragmatic solution.
Contact Metav Werkzeuge for ordering and application advice on the Microtech Metrology digital caliper — request the ISO 17025 certificate and confirm accessory configuration directly with our specialists at Metav Werkzeuge
Technical data
- Article number: 141730513
- GTIN: 4061905452529
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 20–520 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Display type: Swiss Digit, height 11 mm
Special features
- IP protection: IP67
- Delivered with calibration certificate (ISO 17025)
- Accessories included: measuring cones Ø20 mm and Ø35 mm
- Digital: yes
FAQ
Is the caliper supplied with a calibration certificate?
The instrument is delivered fully calibrated according to ISO 17025 and includes the accompanying calibration certificate for traceability.
What measuring range does the instrument cover?
The unit measures from 20 to 520 mm, making it suitable for larger workshop and inspection tasks where extended reach is required.
Can the caliper be used in damp or dusty environments?
With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, increasing reliability in demanding environments.
Are accessories included for bore measurements?
Yes, the delivery includes measuring cones Ø20 mm and Ø35 mm to support bore and centre‑to‑centre measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.