200mm Depth Gauge Digital 0.01mm Resolution IP54, ISO 17025 Calibrated USB Data Output - Microtech Metrology
€99.00
Product information "200mm Depth Gauge Digital 0.01mm Resolution IP54, ISO 17025 Calibrated USB Data Output - Microtech Metrology"
Take advantage of high repeatability, traceable calibration and workshop‑ready protection for dependable depth measurements — Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed.
Depth Caliper by Microtech Metrology — digital, USB data output, ISO 17025 calibrated
Depth Caliper by Microtech Metrology designed for precise depth measurement in standard workshop and inspection tasks with a 0–200 mm measuring range.
- High-precision accuracy ±0.03 mm
- ISO 17025 calibration certificate included
- USB data output for process documentation
- IP54 protection for workshop environments
Accurate, traceable measurements that speed up inspection
This digital depth caliper delivers a measuring range of 0–200 mm with a specified accuracy of ±0.03 mm, making it well suited to everyday tasks in machining and metalwork where reproducible results matter. The combination of a clear digital display (13 mm height) and a standard resolution of 0.01 mm reduces reading errors and accelerates routine checks. Because the instrument is supplied with an ISO 17025 calibration certificate, measurement records are directly traceable — a practical advantage for quality control and audit processes that require documented evidence.
Reliable data transfer and robust construction for busy workshops
Equipped with a USB data interface and a protected electronic unit rated IP54, the device supports straightforward data logging and works reliably in typical shop conditions where dust and light splashes occur. The secure data output eliminates transcription steps and integrates easily with inspection software or spreadsheets for statistical process control. Hand‑finished measuring jaws improve contact conformity and reduce local deformation at the contact points, which helps maintain measurement consistency over time.
Engineered for daily use and universal workshop tasks
Classified in the Standard (100–300 mm) measurement category, this instrument balances reach with stiffness for common workshop requirements, offering the best compromise between range and handling. The combination of ergonomics, hand‑finished jaws and a guarded slider ensures comfortable one‑hand operation during repetitive measuring tasks. The unit is suitable for routine dimensional control of components, set‑up checks and small batch inspection where repeatability and documented calibration are decisive.
For traceable, workshop‑ready depth measurement choose Microtech Metrology’s calibrated solution — contact Metav Werkzeuge in Emmerich for certified tools and expert advice via info@metav-werkzeuge.com or +49 2822 7131930
Technical data
- Article number: 1432010202
- GTIN: 4061905039126
- Manufacturer: Microtech Metrology
Facts
- Measuring range: 0–200 mm
- Resolution: 0.01 mm
- Accuracy: ±0.03 mm
- Display height: 13 mm
- Data output: USB
- Protection class: IP54
- Calibration: ISO 17025 certificate included
Special features
- Digital depth measuring caliper
- Hand‑finished measuring jaws
- Robust design for workshop use
- Supplied calibrated according to ISO 17025
FAQ
What measuring range does the caliper cover?
The depth caliper covers 0–200 mm, placing it in the Standard measurement class for general workshop and machine‑shop use.
Is the instrument supplied with a calibration certificate?
Yes, this Microtech Metrology depth caliper is delivered with an ISO 17025 calibration certificate for traceable measurements.
How is measurement data transferred from the caliper?
Measurement values are exported via USB, enabling direct logging into inspection software or spreadsheets for quality documentation.
What protection does the caliper offer against shop contamination?
The electronic unit is rated IP54, providing protection against dust ingress and water splashes commonly encountered in workshop environments.
Are the measuring jaws optimised for repeatability?
Yes, the caliper features hand‑finished measuring jaws to improve contact conformity and reduce local deformation, enhancing repeatability.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
Zubehör
Combining USB HID keyboard emulation, one‑button data transmission and a 2 m lead, this cable speeds up measurement capture while reducing manual entry errors and boosting traceability. Order the USB HID data cable directly via Metav Werkzeuge or contact our consultants for compatibility checks and procurement advice. USB HID data cable for Microtech Certi Met calipers and indicators — 2 m, one‑button USB HID data cable is a compact connection lead for feeding readings from digital calipers and indicators directly into PC applications, ideal for workshop and inspection environments. USB HID interface for direct keyboard input 2 m cable length for flexible workstation reach One‑button data transmission for fast capture Faster capture, fewer transcription errors The USB HID interface enables direct data transfer by emulating a keyboard, so measurement values are sent as keystrokes to spreadsheets, measurement software or inspection forms. This reduces manual retyping and common transcription mistakes, increasing throughput in repetitive measuring tasks. The single‑press send function ensures each measurement is recorded consistently, which simplifies logging and supports a smoother quality‑control workflow. Practical reach and robust connection on the shop floor With a 2 m lead, the connection provides practical reach between handheld instruments and desktop PCs or laptops without the need for adapters. The cable is specified for use with Certi Met digital calipers and indicators that carry an IP54 rating, which suits typical production and workshop conditions where splash and dust resistance are required. The durable connector and strain relief are designed for regular use, keeping data transmission reliable during daily measuring routines. Plug‑and‑play integration with existing apps Emulating a keyboard means no special drivers are required for most systems; the device is recognised as a HID input device and sends values directly to the active cursor position. This plug‑and‑play behaviour supports rapid integration with inspection templates and standard office software, reducing IT overhead and speeding up deployment on the shop floor. For processes that demand fast measurement cycles, the lead streamlines data capture and reduces administrative latency. Clear benefits for traceability and efficiency By automating the transfer of readings, the cable supports traceability chains and frees operator time for value‑added tasks. The one‑button transmission improves consistency in capture routines and helps to maintain a clear audit trail when measurements are recorded into digital records. This makes the lead a practical accessory for quality managers seeking dependable, low‑complexity data acquisition without system reconfiguration. Contact Metav Werkzeuge to secure the Microtech USB HID cable and confirm compatibility with existing Certi Met instruments; technical procurement advice and fast delivery from Emmerich are available Technical Data Article number: 141083000 GTIN: 4061905452697 Data output: USB‑HID Cable length: 2 m Manufacturer: Microtech Metrology Facts Compatible with Certi Met digital calipers IP54 Compatible with Certi Met digital indicators IP54 HID mode (keyboard emulation) One‑button data send Special features Direct data transfer to apps and spreadsheets Designed for professional workshop use Durable connector with strain relief Intended for use with Certi Met Digital instruments FAQ How does the cable transfer measurement values to a PC? The cable uses USB HID keyboard emulation so values are sent as keystrokes directly into the active field of applications; the Microtech USB HID cable requires no special drivers for standard systems. Is the lead compatible with all Certi Met instruments? Compatibility is specified for Certi Met digital calipers and indicators with IP54 protection; confirm the instrument model if uncertain, as listed in the product documentation. Does the cable require any software to operate? No additional software is necessary for basic operation because the device functions as a HID keyboard; advanced integrations may use application‑level settings to parse incoming data automatically. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools