200mm Depth Gauge Digital Swiss Digit 0.01mm Resolution IP67 Calibrated ISO 17025 - Microtech Metrology
€239.00
Product information "200mm Depth Gauge Digital Swiss Digit 0.01mm Resolution IP67 Calibrated ISO 17025 - Microtech Metrology"
Take advantage of a robust, workshop-ready depth caliper that combines a large, easy-to-read display and IP67 protection with laboratory-grade traceability; the calibrated instrument delivers consistent measurements across a 0–200 mm range and is available via Metav Werkzeuge for specialist advice and fast dispatch.
Depth caliper — Digital depth measuring caliper, 0–200 mm, IP67 (Microtech Metrology)
The depth caliper from Microtech Metrology is a digital measuring instrument designed for reliable depth measurements in workshop and inspection environments, with a robust housing and precision-readout for repeatable results
- Swiss Digit display, 11 mm height
- IP67 water and dust protection
- ISO 17025 calibration with certificate
- Accurate to 0.03 mm, 0–200 mm range
High-precision measuring that keeps production on target
This instrument offers a measured accuracy of 0.03 mm across the 0–200 mm range, making it suitable for standard workshop metrology where repeatable tolerances are required. The specification sits within the industrial digital caliper class for general machine‑shop quality control; the nominal display step of 0.01 mm provides fine resolution while the stated accuracy explains realistic measurement uncertainty for longer ranges. The net effect is a tool that reduces rework and supports consistent assembly and inspection cycles.
Robust design for harsh workshop conditions
Built for everyday use, the caliper features an IP67 rating and solid construction that protect the electronics from dust and temporary immersion—benefits that translate into longer service life and fewer interruptions. The hand-crafted measuring jaws improve contact geometry and clamping behaviour, which helps maintain measurement stability when probing deep pockets or stepped features. These design choices reduce equipment downtime and lower the total cost of ownership in demanding production environments.
Traceable calibration for quality assurance
The instrument is supplied fully calibrated to ISO 17025 standards and delivered with a calibration certificate, offering documented traceability for quality systems and audits. This certified calibration confirms that the measuring chain meets recognised laboratory criteria, simplifying compliance for internal quality control and external inspection. For procurement and quality teams this means immediate acceptance into inspection workflows without additional external calibration steps.
Readability and practical handling for everyday use
A Swiss Digit display with an 11 mm digit height improves legibility on the shop floor, speeding up checks and reducing reading errors. The digital readout and ergonomic slider action allow quick, one‑hand depth checks of bores, counterbores and stepped parts; the instrument’s balance between reach and stiffness reflects the Standard class (100–300 mm) ideal for machine‑shop tasks. Together, these features support faster inspection cycles and clearer measurement records.
Contact Metav Werkzeuge for tailored advice, calibration documentation and delivery from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930
Technical data
- Article number: 1432010203
- GTIN: 4061905039164
- ECLASS: 21170344
Facts
- Measuring range: 0–200 mm
- Resolution (display): 0.01 mm
- Claimed accuracy: 0.03 mm
- Protection class: IP67
Special features
- Digital display: Swiss Digit, digit height 11 mm
- Hand-crafted measuring jaws
- Digital instrument (electronic readout)
- Supplied calibrated to ISO 17025 with certificate
- Manufacturer: Microtech Metrology
FAQ
How precise is the instrument for routine inspection tasks?
The depth caliper delivers a stated accuracy of 0.03 mm and a display resolution of 0.01 mm, which is well suited for standard machine‑shop inspections and routine QC documentation.
Does the caliper arrive calibrated and with traceability?
Yes — the device is supplied fully calibrated to ISO 17025 and includes a calibration certificate for immediate use in accredited processes.
Can the tool be used in wet or dusty environments?
The IP67 rating protects the electronics against dust ingress and temporary immersion, making the instrument appropriate for harsher workshop conditions.
What measuring range does this caliper cover?
The instrument measures from 0 to 200 mm, placing it in the Standard class for workshop use where a good balance of reach and stiffness is needed.
Who manufactures this caliper and what is the SKU?
This depth caliper is produced by Microtech Metrology and listed under SKU 1432010203 for identification and reordering.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.