300mm Depth Gauge Digital Swiss Digit Display IP67, Calibrated to ISO 17025 - Microtech Metrology
€279.00
Product information "300mm Depth Gauge Digital Swiss Digit Display IP67, Calibrated to ISO 17025 - Microtech Metrology"
Take advantage of precise depth measurement, robust IP67 protection and a factory-issued ISO 17025 calibration certificate for reliable quality control. Combine the clear Swiss Digit readout and hand‑finished measuring jaws to reduce rework and speed up inspection. Order directly via Metav Werkzeuge or consult the specialists for integration advice.
Depth caliper (digital) – Swiss Digit display, IP67 – Microtech Metrology
The Depth Caliper is a digital instrument designed for accurate depth measurement in standard workshop and inspection tasks across mechanical and metalworking environments.
- Digital Swiss Digit display, 11 mm height
- Calibrated to ISO 17025 with certificate
- IP67 dust‑ and water‑resistant
- Precision ±0.03 mm for standard workshop use
Consistent measurement accuracy for everyday quality control
The instrument delivers an assured ±0.03 mm accuracy with a 0.01 mm reading step, providing a balance between sensitivity and robustness that suits shop‑floor and inspection‑bench routines. The combination of clear numeric resolution and defined error bounds means fewer ambiguous readings and a lower rate of corrective work. Because the device is classified in the standard measuring range of 0–300 mm, it covers the typical span needed for components, housings and fixturing elements without sacrificing stiffness or handling.
Built to withstand industrial conditions and frequent use
Sealing to IP67 protects the electronics from dust ingress and temporary immersion, reducing downtime from contamination or coolant exposure. The display uses a Swiss Digit module with an 11 mm character height for fast reading under workshop lighting. The caliper’s hand‑finished measuring jaws ensure true contact geometry and repeatability across many cycles; the finished surfaces reduce the risk of scoring delicate parts while maintaining long service life. This robust construction supports reliable measurements in harsher production environments.
Traceability and integration into quality processes
Delivered fully calibrated under ISO 17025, the tool arrives with a traceable calibration certificate suitable for incorporation into formal quality systems. This calibration step documents measurement uncertainty and supports audits and quality records without additional in‑house calibration. The device’s digital output and standardised labelling simplify documentation in inspection reports and allow straightforward comparison with other instruments supplied via Metav’s quality filter for the European market.
For procurement or traceable calibration of this Microtech Metrology depth caliper (SKU 1432010303), contact Metav Werkzeuge in Emmerich for personalised advice and delivery arrangements: info@metav-werkzeuge.com, +49 2822 7131930
Technical data
- Article number: 1432010303
- GTIN: 4061905039027
- Manufacturer: Microtech Metrology
- Type: Digital depth caliper
- Display: Swiss Digit, height 11 mm
- Protection class: IP 67
- Accuracy: ±0.03 mm
- Measuring range: 0–300 mm
Facts
- Resolution: 0.01 mm
- Display height: 11 mm
- Measuring range: 0–300 mm
- Accuracy: 0.03 mm
- eClass: 21170344
Special features
- Hand‑finished measuring jaws
- IP67 sealed electronics
- Delivered calibrated to ISO 17025 with certificate
- Digital interface: Swiss Digit display
- SKU: 1432010303
FAQ
What measurement accuracy can be expected from this instrument?
The depth caliper from Microtech Metrology provides an accuracy of ±0.03 mm, with a display resolution of 0.01 mm, making it suitable for standard workshop inspection and metalworking tasks.
Is the caliper supplied with a calibration certificate?
Yes, the instrument is delivered calibrated under ISO 17025 and comes with a calibration certificate for traceability and inclusion in quality documentation.
Can the caliper be used in wet or dusty environments?
The device is rated IP67, so the sealed electronics withstand dust ingress and temporary immersion, supporting use in machining areas with coolant or residual particulate.
What measuring range does the instrument cover and which applications suit it best?
The caliper covers 0–300 mm, the standard workshop range, and is ideal for component depth checks, housing inspections and general metalworking measurement tasks.
Are the measuring faces suitable for repeated contact with machine parts?
Yes, the unit features hand‑finished measuring jaws, offering durable contact geometry and repeatable results across frequent use.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.