500mm Depth Caliper Digital Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
€419.00
Product information "500mm Depth Caliper Digital Swiss Digit Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of precise ±0.04 mm accuracy, a 500 mm measuring range and rugged IP67 protection for reliable depth control in medium‑range components; fully calibrated to ISO 17025 and ready for immediate use. Order the depth caliper directly via Metav Werkzeuge or contact our consultants for advice.
Depth Caliper — digital depth measuring calliper with Swiss Digit display and IP67 protection
A depth caliper designed for medium‑range workshop and fixture measurements, combining a clear 11 mm Swiss Digit display with industrial sealing and lab‑grade calibration
- Digital depth caliper with Swiss Digit 11 mm display
- Measurement range up to 500 mm
- Accuracy ±0.04 mm for reliable results
- IP67 dust- and water-resistant design
- Delivered fully calibrated to ISO 17025 with certificate
Accurate, measurable control for production environments
The digital depth caliper delivers industrially relevant accuracy and repeatability, translating directly into fewer rejected parts and faster setup times on the shop floor. With a stated accuracy of ±0.04 mm and a display resolution of 0.01 mm, measurements that previously required multiple checks can be completed confidently in a single pass. The clear Swiss Digit 11 mm readout reduces reading errors and speeds operator throughput, while the digital output option supports straightforward data capture for quality records.
Built to withstand workshop conditions and reduce maintenance downtime
Sealing to IP67 and a robust construction mean the instrument resists coolant, chips and dust that commonly shorten service life. Hand‑finished measuring jaws ensure consistent contact geometry and minimise wear on mating surfaces; this increases the interval between servicing and keeps calibration drift to a minimum. The medium‑range format (up to 500 mm) offers an effective compromise between reach and rigidity, making this tool suitable for component housings, fixtures and mould assemblies without sacrificing handling comfort.
Ready for traceable inspection and quality systems
Delivered fully calibrated to ISO 17025 with a calibration certificate, the instrument provides immediate traceability for incoming inspections, first article checks and audit documentation. Built‑in digital reading and optional data interfaces simplify integration into statistical process control and inspection workflows. This combination of laboratory‑grade calibration and workshop durability supports both production control and compliance requirements, reducing administrative effort when demonstrating measurement capability.
Choose the ISO 17025‑calibrated depth caliper from Metav Werkzeuge for reliable medium‑range depth measurement and documented traceability — contact Metav Werkzeuge in Emmerich for procurement or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930
Technical data
- Article number: 1432010503
- GTIN: 4061905452178
- Manufacturer: Microtech Metrology
- Measuring range: 0–500 mm
- Display type: Swiss Digit, 11 mm
Facts
- Accuracy: ±0.04 mm
- Resolution: 0.01 mm
- IP rating: IP67
- Digital: yes
Special features
- Hand-finished measuring jaws
- Delivered fully calibrated to ISO 17025 with certificate
- Digital depth caliper design
FAQ
What is the measuring range of the instrument?
The instrument covers a measuring range of 0–500 mm and is therefore suitable for medium‑range depth measurements in workshop and fixtures.
Is the tool supplied with a calibration certificate?
Yes, the depth caliper is delivered fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability.
How resistant is the caliper to shop floor contamination?
The instrument is rated IP67, offering protection against dust ingress and temporary immersion in water, which enhances reliability in harsh production environments.
Which display and resolution does the caliper use?
The device uses a Swiss Digit 11 mm digital display with a resolution of 0.01 mm, enabling clear readouts and precise recording of depth measurements.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.