2000mm Depth Gauge Digital Swiss Digit 11mm Display IP67, ISO 17025 Calibrated - Microtech Metrology
€1,790.00
Product information "2000mm Depth Gauge Digital Swiss Digit 11mm Display IP67, ISO 17025 Calibrated - Microtech Metrology"
The combination of a long 2000 mm range, robust IP67 protection and an ISO 17025 calibration certificate makes this depth caliper a dependable choice for large-format depth measurements; its clear Swiss Digit display and hand-finished measuring jaws support fast, reproducible results on the shop floor. Order the depth caliper directly via Metav Werkzeuge or consult our specialists for application-specific advice.
Depth caliper — extra‑long measuring range, ISO 17025 calibrated (Microtech Metrology)
A Depth caliper engineered for precise depth measurement of large components in toolrooms and heavy workshops, offering workshop-grade sealing and traceable calibration for immediate use.
- ISO 17025 calibration certificate included
- IP67 protection against dust and water
- 0–2000 mm measuring range for large components
- Swiss Digit display with 11 mm digit height
Precision where span and accuracy matter
For measurements that demand both length and repeatability, this depth caliper delivers a 2000 mm range together with a fine resolution of 0.01 mm and a stated accuracy of 0.08 mm. The long measuring beam is designed to maintain profile stiffness over its full travel, which reduces bending-related error when capturing deep features on housings, fixtures or mould components. The digital readout simplifies interpretation of results and avoids parallax problems associated with mechanical scales, while the shown numerical specifications provide a clear, comparable basis for quality control and production planning.
Robust build for demanding workshop use
This instrument is built to withstand daily shop conditions: certified IP67 protection prevents dust ingress and allows brief immersion, and the hand-finished jaws ensure precise contact geometry where it matters most. The Swiss Digit display with 11 mm digit height gives high-contrast numerals for quick readings, reducing operator time per measurement. The digital electronics are sealed and the mechanical carriage is finished to smooth running tolerances, which together lower the risk of measurement variability caused by contaminant ingress or uneven sliding action.
Traceable calibration and ready-to-use delivery
Delivered fully calibrated with an ISO 17025 certificate, the caliper enters service with documented measurement traceability suitable for quality audits and incoming inspection protocols. The calibration certificate documents the instrument’s conformity to laboratory standards and simplifies integration into formal inspection procedures. Combined with Metav’s distribution from Emmerich — which acts as a quality filter for the European market — this instrument is practical for precision departments that require both long-range capability and documented measurement assurance.
For application guidance or to arrange supply of the ISO 17025‑calibrated depth caliper, contact Metav Werkzeuge for personalised advice and reliable dispatch from Emmerich.
Technical data
- Article number: 1432012003
- GTIN: 4061905459825
- Brand: Microtech Metrology
Facts
- Measuring range: 0–2000 mm
- Resolution: 0.01 mm
- Accuracy: 0.08 mm
- Display digit height: 11 mm
Special features
- IP67 protection
- Hand-finished measuring jaws
- Swiss Digit display
- Delivered with ISO 17025 calibration certificate
- Digital caliper, workshop design
FAQ
What measuring range does the caliper cover?
The caliper covers a measuring span of 0–2000 mm, designed for large components and deep features where extended reach and stiffness are required.
Is the instrument delivered calibrated for quality systems?
Yes, the depth caliper is supplied fully calibrated with an ISO 17025 certificate, providing traceability and documentation for audits.
How readable is the display in bright workshop lighting?
The Swiss Digit display with 11 mm digit height provides high-contrast numerals for rapid reading even under typical workshop lighting.
Can this caliper be used in a wet or dusty environment?
With IP67 protection, the caliper resists dust ingress and brief immersion, making it suitable for harsh shop-floor conditions when handled according to manufacturer guidance.
Are the measuring faces suitable for repeatable contact measurement?
The instrument features hand-finished measuring jaws to ensure accurate contact geometry and reproducible measurement points across repeated use.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.