3000mm Depth Caliper Digital Swiss Digit 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
€3,500.00
Product information "3000mm Depth Caliper Digital Swiss Digit 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology"
Take advantage of the combination of long-range capability, dust‑ and water‑resistant protection, and factory calibration for reliable metrology of large components; the device’s Swiss Digit display and fine resolution support clear readings across its full span. Order the instrument directly via Metav Werkzeuge or consult the Metav specialists for application advice.
Depth Caliper — Digital, 0–3000 mm, IP67 (Microtech Metrology)
Depth caliper for precision depth measurement of large-format components and heavy‑duty workshop metrology
- 0–3000 mm measuring range
- IP67 protection for harsh environments
- ISO 17025 calibration with certificate
- Swiss Digit 11 mm display, 0.01 mm resolution
Accurate long‑range measurement for large parts
This instrument is engineered for measurement tasks that extend beyond standard workshop sizes: the 0–3000 mm span places it in the Extra‑Long class, which is suited to large housings, long shafts and sizeable assemblies. The large measuring range combined with a fine display resolution of 0.01 mm and a clearly readable Swiss Digit 11 mm readout reduces reading errors and speeds up inspection routines. The combination of range and display clarity delivers reproducible depth data across long distances, helping to maintain process stability when measuring large components.
Calibrated traceability and metrology-grade build
Delivered fully calibrated to ISO 17025, the caliper arrives with an official calibration certificate that documents traceability and measurement uncertainty. This certified calibration supports quality assurance and conformity checks in regulated production environments. Precision contact faces are hand‑crafted measuring faces, a detail that improves seating on measured surfaces and reduces tilt-induced error. Although the nominal accuracy is specified as 0.1 mm, the high display resolution and certified calibration make the instrument a dependable tool for large‑format inspections where documented traceability is required.
Robust protection and workshop usability
Designed for use on the shop floor, the unit carries an IP67 rating for dust-tight and temporary immersion resistance, which keeps the electronics and slider protected in demanding conditions. The digital electronics are housed behind the Swiss Digit display for fast, unambiguous readout; the robust construction minimises flex over long spans, aiding repeatability. For handling and measurement planning this Extra‑Long category instrument benefits from deliberate handling procedures and suitable supports to ensure stable measurements along its full length. Clear labelling and the durable readout support efficient integration into incoming, in‑process and final inspection workflows.
Contact Metav Werkzeuge for application-specific advice and ordering; the Metav team in Emmerich can confirm suitability for particular large‑format tasks and provide the required documentation.
Technical data
- Article number: 1432013003
- GTIN: 4061905459832
- Brand: Microtech Metrology
- Model type: Digital depth caliper
- Display: Swiss Digit height 11 mm
Facts
- Measuring range: 0–3000 mm
- Resolution: 0.01 mm
- Accuracy: 0.1 mm
- Protection class: IP67
- Display height: 11 mm
Special features
- Delivered calibrated to ISO 17025 with certificate
- Hand‑crafted measuring faces
- Digital readout
- Classified as Extra‑Long measuring range (2000–5000 mm)
FAQ
Is the caliper supplied with a calibration certificate?
Yes. The depth caliper is delivered fully calibrated to ISO 17025 and includes an official calibration certificate for traceability.
What environments is the instrument suitable for?
The IP67 protection class ensures the instrument resists dust ingress and temporary immersion, making it suitable for demanding workshop and shop‑floor conditions.
What accuracy and resolution can be expected for large measurements?
The readout provides a 0.01 mm resolution; the specified accuracy is 0.1 mm, and the ISO 17025 calibration documents the measurement uncertainty across the stated range.
Can the device be used for very long workpieces such as shafts or housings?
Yes. With a measuring range up to 3,000 mm, the caliper is designed for long components; stable support and correct handling are recommended to ensure reproducible results.
Which manufacturer produced this instrument and what is the article number?
The instrument is produced by Microtech Metrology; article number 1432013003 is listed for ordering and documentation purposes.
Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Zubehör
USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.