150mm Cold Light Source LE.5211 150W Halogen, 3000K - Euromex

High optical performance, combined with a long working distance and stable column stand , delivers precise, repeatable inspections for assembly and quality control. Benefit from the trinocular head and dual LED illumination for reliable visual observation and documentation—order the NexiusZoom EVO NZ.1703-P via Metav Werkzeuge or consult our specialists for configuration advice. NexiusZoom EVO NZ.1703-P – Stereomicroscope with 6.5–55x zoom and 110 mm working distance (Euromex) A NexiusZoom EVO NZ.1703-P stereomicroscope is designed for precision inspection, assembly work and laboratory observation with integrated documentation capability Stereomicroscope with 6.5–55x zoom 110 mm long working distance for tool clearance Trinocular 45° head for documentation Dual 3 W LED incident and transmitted lighting High-magnification optics for reliable defect detection The optical system combines a zoom lens (0.65–5.5x) with HWF 10x/23 mm eyepieces, providing an effective magnification range of 6.5–55x for detailed visual inspection. The zoom is engineered with a 1:8.4 ratio and click-stops, enabling repeatable positioning when switching magnifications. Antifungal treatment and anti-reflection coatings on the optics reduce stray light and internal reflections, which improves contrast and makes fine surface defects and solder joints easier to identify. This optical setup supports consistent quality control in production or laboratory environments. Spacious working distance and ergonomic handling for routine tasks A 110 mm working distance delivers clearance for assembly tools, probes and fixtures, reducing the need to reposition components during inspection. The trinocular, 45° head with dioptre adjustment of ±5 on both sides and an interpupillary range of 54–75 mm ensures comfortable, ergonomic observation for users of different stature. Focus is achieved via a coarse drive with adjustable friction, enabling controlled movement and resistance to suit operator preference. These design choices reduce fatigue and increase throughput during lengthy inspection sessions. Integrated illumination and documentation-ready configuration Illumination comprises 3 W LED incident and 3 W LED transmitted lighting, offering flexible contrast options for both opaque and translucent samples. Consistent, energy-efficient LED light sources maintain colour stability and avoid heat-related specimen distortion. The trinocular port facilitates camera attachment for documentation; specific photo accessories and adapters are available for digital capture and integration into inspection workflows. Where image capture is required, select the appropriate photo connection and sensor size to match the desired documentation standards. Robust stand and practical accessories for workshop use The column stand construction provides a stable platform for precise positioning and repeatable measurements in a workshop or laboratory setting. With a compact footprint and a net weight of 5.2 kg, the system balances portability with durability. Standard delivery includes eyecups, a dust cover, user manual, mains cable and a spare fuse, ensuring the instrument is inspection-ready on arrival. Optional exchange heads and camera adapters extend the unit’s versatility for specialised tasks without compromising core performance. For tailored advice on configuration, accessories and integration of the NexiusZoom EVO NZ.1703-P into inspection workflows, contact Metav Werkzeuge for expert guidance and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: NZ.1703-P SKU: NZ.1703-P Brand: Euromex Model series: NexiusZoom EVO Facts Magnification: 6.5–55x Zoom: 0.65–5.5x Zoom ratio: 1:8.4 (click-stops) Working distance: 110 mm Weight: 5.2 kg Eyepieces: HWF 10x/23 mm Special features Microscope head: Trinocular, 45° Illumination: 3 W LED incident and 3 W LED transmitted Optics: Antifungal treatment and anti-reflection coating Focusing: Coarse drive with adjustable friction Dioptre adjustment: ±5 both sides Interpupillary distance: 54–75 mm Stand: Column stand Included accessories: Eyecups; dust cover; manual; mains cable; spare fuse Accessory notes: Photo connection NZ.9850 requires specified sensor size; specific SLR adapters AE.5025/AE.5040 require matching camera bayonet; some configuration heads require order review FAQ What magnification range does the system cover? The instrument offers a magnification range of 6.5–55x, achieved by the zoom lens (0.65–5.5x) combined with the HWF 10x eyepieces in the NexiusZoom EVO NZ.1703-P. Is the working distance sufficient for using tools under the objective? Yes, the 110 mm working distance provides ample clearance for hand tools and small fixtures during inspection and assembly tasks with the NexiusZoom EVO NZ.1703-P. Can a camera be fitted for documentation? The trinocular 45° head supports camera attachment; the NexiusZoom EVO NZ.1703-P can be equipped with dedicated photo adapters—ensure the chosen adapter matches the camera bayonet and sensor size as noted in the accessory conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of a wide zoom range (6.5–55×), long 110 mm working distance and integrated 3 W LED illumination for consistent, efficient inspections; order the instrument directly via Metav Werkzeuge or contact our consultants for configuration advice. NexiusZoom EVO NZ.1702-P – Stereomicroscope with 6.5–55× zoom and 110 mm working distance (Euromex) The NexiusZoom EVO NZ.1702-P is a column‑stand stereomicroscope engineered for detailed visual inspection and assembly tasks in laboratories, quality control and fine mechanical workshops. Wide zoom 6.5–55× for versatile magnification 110 mm working distance for ample space 3 W LED epi and transmitted illumination Binocular 45° head with ±5 dioptre adjustment One instrument that replaces several objectives for faster throughput The flexible zoom range from 6.5–55×, driven by the Zoom 0.65–5.5× objective system, allows operators to switch between overview and detail without changing optics. This reduces setup times and supports higher throughput in inspection lines where both low‑magnification orientation and high‑magnification defect analysis are required. The continuous zoom with click‑stops provides repeatable positions, supporting reproducible visual inspection routines and documentation procedures. Comfortable, glare‑free viewing for longer work cycles A 110 mm working distance combined with both 3 W LED incident and transmitted illumination creates a well‑lit observation field while leaving space for probes, tools or fixtures. The binocular head set at a 45° angle, with a pupillary range of 54–75 mm and ±5 dioptre adjustment on both eyepieces, promotes ergonomic posture and reduces eye strain during extended use. Optics treated against fungal growth and with anti‑reflective coatings preserve image contrast and reliability in humid or demanding environments. Robust mechanics and intuitive focusing for repeatable results Mounted on a stable column stand, the instrument features a coarse focus drive with adjustable friction that secures focus positions even when components are introduced into the field. The balanced mechanical design, at a weight of 5.0 kg, combines stability with manageable handling for lab benches and workstations. Included accessories such as eyecups, a dust cover, power lead and spare fuse mean the instrument is ready for immediate use on arrival. Modular design and accessory compatibility to match tasks The microscope’s modular concept supports optional exchange heads and configuration upgrades, enabling integration into specific production workflows or specialised inspection tasks. Accessories and configuration notes (NZ.5302, NZ.5303, NZ.9095, NZ.9520, NZ.9525, AE.5168‑NZ) indicate which components can be combined; some items require a newly ordered instrument or must not be used together with certain front lenses. This modularity ensures a future‑proof solution for evolving measurement and inspection requirements while simplifying maintenance and spare‑part logistics. For tailored configuration and delivery from Emmerich, contact Metav Werkzeuge – our specialists can advise on the ideal setup for the NexiusZoom EVO NZ.1702-P and arrange dispatch directly from our warehouse; email: info@metav-werkzeuge.com or Tel: +49 2822 7131930. Technical Data Article number: NZ.1702-P SKU: NZ.1702-P Brand: Euromex Product type: Stereomicroscope Model series: NexiusZoom EVO Facts Magnification: 6.5–55× Zoom objective: 0.65–5.5× Working distance: 110 mm Illumination: 3 W LED incident; 3 W LED transmitted Weight: 5.0 kg Dioptre adjustment: ±5 (both sides) Pupillary distance: 54–75 mm Zoom ratio: 1:8.4 (with click‑stops) Special features Binocular head, 45° Coarse focus with adjustable friction Optics with antifungal treatment Anti‑reflective coating Column stand execution Included: eyecups; dust cover; manual; power cord; spare fuse Compatibility notes: NZ.5302, NZ.5303, NZ.9095, NZ.9520, NZ.9525, AE.5168‑NZ FAQ What magnification range does the instrument cover? The instrument offers a 6.5–55× magnification range via a 0.65–5.5× zoom objective, enabling both overview inspection and detailed analysis without changing objectives. Is the working distance sufficient for component handling and tool access? Yes, the 110 mm working distance provides ample room for probes, measuring tools and small fixtures while keeping the specimen well illuminated. Which illumination types are built in? Integrated 3 W LED incident (up‑light) and 3 W LED transmitted (down‑light) sources are supplied for shadow‑free and contrast‑controlled observation. Can the head be adjusted for different operators? The binocular head is set at 45° and includes a pupillary distance of 54–75 mm plus ±5 dioptre adjustment on both eyepieces to accommodate varying eyesight and working postures. Are spares and accessories available for configuration changes? Yes. The microscope supports exchange/configuration heads and designated accessories (referenced by NZ codes); some items require a new instrument order or have mutual‑exclusion conditions as noted. Is the microscope suitable for continuous use in a production environment? The robust column stand, stable focusing mechanism and treated optics make the instrument suitable for routine inspection tasks and repetitive visual checks in laboratory and light production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com