10mm Long Solid Carbide End Mill DIN 6527L Type W 38/40° Helix 3 Flute Special Coating, 72mm Overall Length - TECWERK

The combination of VHM construction, a TiAlN special coating and a long design ensures reliable performance for roughing and finishing of non‑ferrous metals; this reduces rework and keeps cycle times steady. Order the TECWERK long solid carbide end mill directly via Metav Werkzeuge or contact our consultants for tailored advice.

TECWERK solid carbide long end mill (DIN 6527 L, 10 mm) — 38/40° helix, 3 flutes

A TECWERK long solid carbide end mill designed for efficient plunge, ramp and peripheral cutting in non‑ferrous metals and light alloys.

• Solid carbide (VHM) long design
• TiAlN special coating prevents build‑up
• 38/40° helix with 3 flutes
• Centre‑cutting for plunge operations

Precision cutting for non‑ferrous production environments

Made from VHM (solid carbide) and finished with a TiAlN-based special coating, this long end mill provides a hard, wear‑resistant cutting edge that reduces adhesion when machining aluminium and copper. The tool’s 10 mm nominal diameter and 3‑flute layout combine stiffness with efficient chip evacuation, which helps maintain consistent material removal rates. The cutter’s centre‑cutting geometry enables true plunging and ramping, so that complex toolpaths can be executed without the need for separate drilling operations. These technical choices translate directly into shorter cycle times and fewer tool changes on production racks.

Stable running and superior surface finish through helix and geometry

An unequal Z.3 helix with a 38/40° helix angle reduces harmonic excitation and delivers a vibration‑damped cut, improving surface quality even at elevated feedrates. The long shank and cylindrical shank (DIN 6535 HB) provide reliable clamping, while the halsfreischliff (neck relief) and 45° protective chamfer with a 0.2 mm edge radius minimise contact at the neck and protect the cutter edge during entry and exit. Together, these geometric details preserve tool life and promote repeatable finishes, especially when alternating between roughing and finishing passes on light alloys and other non‑ferrous materials.

Application benefits, handling and productivity gains

Optimised for roughing and finishing of aluminium, copper and similar non‑ferrous metals, the tool’s long effective length and vibration‑reducing spiral allow higher material removal where a longer reach is necessary. The combination of special coating and solid carbide substrate supports higher cutting speeds while keeping built‑up edge to a minimum, reducing manual rework. The right‑hand cutting direction and centre‑cutting capability make the cutter versatile for both conventional milling and more aggressive strategies; as a result, machining programmes can be simplified and throughput increased without compromising surface integrity.

Contact Metav Werkzeuge for expert selection of the TECWERK long solid carbide end mill or request a tailored machining recommendation from our technical team at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number / SKU: 2000806567NW
• Manufacturer: TECWERK
• Standard: DIN 6527

Key measurements

• Diameter: 10 mm
• Overall length: 72 mm
• Effective length: 30 mm
• Cutting length: 3 mm
• Shank diameter: 10 mm
• Number of flutes: 3
• Helix angle: 38/40°
• Neck relief (freischliff): 9.5 mm
• Protective chamfer: 0.2 mm

Materials & features

• Material: VHM (solid carbide)
• Coating: Special coating (TiAlN-type)
• Cutting direction: Right‑hand cutting
• Centre‑cutting
• Long version, DIN 6527 L, Type W
• Cylindrical shank according to DIN 6535 HB
• Z.3 with unequal helix pitch for low vibration
• Suitable for roughing and finishing of aluminium, copper and other non‑ferrous metals
• 45° protective chamfer, 3 cutting edges

FAQ

What materials are best machined with this long solid carbide end mill?
The TECWERK long solid carbide end mill is optimised for aluminium, copper and other non‑ferrous metals, delivering excellent chip evacuation and surface finish when used at recommended speeds and feeds.

Can this cutter be used for plunging operations?
Yes, the cutter’s centre‑cutting geometry allows controlled plunging and ramping, so drilling operations can often be avoided in favour of direct plunge cycles.

How does the Z.3 unequal helix affect machining performance?
The Z.3 arrangement with unequal helix pitch reduces vibration and distributes cutting forces, which improves surface quality and extends tool life compared with equal‑pitch alternatives.

Is the coating suitable for high cutting speeds?
The TiAlN-type special coating increases thermal resistance and prevents build‑up, making the cutter well suited to elevated cutting speeds typical for non‑ferrous machining.

What shank standard does the tool use for clamping?
The tool features a cylindrical shank to DIN 6535 HB, ensuring compatibility with standard collets and toolholders for secure clamping and minimal runout.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund