High-precision micro-milling benefits from the combination of solid carbide construction and TiSiN coating, delivering extended tool life and consistent surface finish; order the cutter directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK End mill Type N – 1.5 mm, solid carbide, TiSiN, 45° helix The TECWERK end mill Type N is a miniature solid carbide cutter designed for high-speed cutting and reliable finishing in steel, cast materials and non-ferrous metals for industrial micro-milling applications. Solid carbide construction TiSiN surface for high wear resistance 45° helix for fast chip evacuation 3-flute design for smooth finishing Precision and performance for micro-milling operations This miniature cutter combines a 1.5 mm cutting diameter with a 3 mm cutting length, engineered for high-speed cutting (HSC) where stability and repeatable results matter. The 3-flute geometry balances chip evacuation with surface integrity, while the 45° helix promotes controlled chip flow and reduces cutting forces. Manufactured from solid carbide, the tool provides rigidity and thermal stability that support tight tolerances and reduced vibration during machining. The short overall length and compact geometry make it especially suited to micro-milling tasks where tool deflection must be minimised. Durable coating and material suitability explained The TiSiN coating adds a hard, thermally stable surface that resists abrasive wear and adhesive build-up, extending service intervals in demanding runs. In practical terms, TiSiN offers improved performance when machining steel and non-ferrous metals, and it helps to maintain a fine edge during finishing passes. The substrate material is solid carbide, which provides the required toughness for precision cutters; customers can therefore expect an advantageous ratio of wear resistance to cutting performance in both prototype and small-batch production environments. Shank design and easy integration into production Equipped with a 4 mm shank and produced to a shank tolerance of h6, the cutter fits standard toolholders and collets that comply with DIN shaft standards. The tool is supplied with a cylindrical shank to DIN 6535 HA, ensuring consistent concentricity and simple clamping. The right-hand cutting direction and short design facilitate compact toolpaths and reduced overhang, helping to maintain surface quality and minimise spindle load. For setups requiring precise runout and repeatability, this configuration supports efficient changeovers and stable machining. Application guidance and recommended use cases Engineered as a universal miniature end mill, the tool excels in finishing and semi-finishing of small features, slotting of shallow pockets and detail work in fixtures. It demonstrates very good suitability for steel and non-ferrous alloys, while harder or special alloys may require adapted feeds or roughing strategies. The tool’s design supports HSC conditions; therefore, optimised spindle speeds and modest axial engagement typically yield the best balance between life and surface finish. When in doubt about cycle parameters, consulting machining data for solid carbide cutters with similar geometries is advised. For micro-milling needs that demand wear-resistant finishing and stable chip control, procure the TECWERK TiSiN-coated solid carbide end mill (SKU 2000806201NW) via Metav Werkzeuge or contact Metav Werkzeuge’s specialists for tailored machining advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 2000806201NW Norm: DIN 6527 Product type: end mill (Type N) Label: Schaftfräser TypN D.1,5mm VHM TiSiN 45Grad HA Manufacturer: TECWERK Facts Diameter: 1.5 mm Overall length: 50 mm Cutting length: 3 mm Effective length: 4 mm Number of flutes: 3 Special features Material: solid carbide (VHM) Coating: TiSiN Helix angle: 45° Cutting direction: right-hand Shank diameter: 4 mm Shank standard: DIN 6535 HA Shank tolerance: h6 Packaging unit: 10 Suitability: very good for steel and non-ferrous metals; conditionally for hardened and special alloys FAQ What materials is this end mill best suited to machine? The TECWERK end mill (Type N, SKU 2000806201NW) is very well suited for steel and non-ferrous metals and offers conditional suitability for harder or special alloys; adjust cutting parameters accordingly. Which coating and substrate are used, and what benefits do they provide? The cutter combines a solid carbide substrate with a TiSiN coating, delivering high wear resistance, thermal stability and extended tool life under HSC conditions. What are the key dimensional specifications for toolholder selection? The tool has a 4 mm cylindrical shank to DIN 6535 HA with an h6 tolerance, ensuring compatibility with standard collets and secure clamping. Is this tool suitable for high-speed cutting (HSC)? Yes, the geometry and short design are optimised for HSC applications, where the 45° helix and 3-flute arrangement support efficient chip evacuation and surface finish. How is the tool supplied and what is the packaging unit? The cutter is supplied in a packaging unit of 10 and is identified by SKU 2000806201NW for ordering and stock control. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co PM construction, ALCRONA coating and a secure Weldon shank to maintain productive milling cycles with minimal tool changes; order the cutter directly via Metav Werkzeuge or consult our specialists for application support. End mill DIN 844 Type HR, Ø10 mm, HSS‑Co PM, ALCRONA – TECWERK The End mill DIN 844 Type HR, Ø10 mm, HSS‑Co PM, ALCRONA – TECWERK is a short, 4‑flute, centre‑cutting solid high‑speed steel cutter designed for stable performance in demanding milling tasks HSS‑Co PM for increased toughness and wear resistance ALCRONA coating for extended tool life 4‑flute, centre‑cut for efficient material removal Weldon shank for secure clamping and repeatability Reliable cutting performance for high‑strength materials Constructed from HSS‑Co PM, this short‑length cutter delivers high red hardness and improved fracture resistance compared with conventional high‑speed steels, enabling stable operation when machining tougher components. The combination of powder‑metallurgical cobalt high‑speed steel and ALCRONA surface treatment reduces flank wear and extends service intervals, which directly supports higher machine uptime and predictable tool costs. Conformance to DIN 844 ensures a familiar tool geometry and dimensional accuracy, simplifying tool selection for production and maintenance teams. Precision and process security in everyday machining The 4‑flute geometry with centre cutting capability provides balanced chip evacuation and allows plunge cutting where required, making the tool suited to pocketing and side‑milling operations. A Weldon shank with positive drive face improves concentricity and torque transfer in standard holders, reducing slot‑out risk and increasing repeatability across batches. With a short design and reinforced flute root, the cutter maintains stiffness for accurate slot widths and consistent surface finish when working steels and stainless materials up to up to 1400 N/mm² tensile strength. Durability, handling and application scope Beyond raw cutting performance, the tool’s ALCRONA coating and refined flute geometry lower cutting forces and thermal loading, which is particularly beneficial when machining stainless steel (INOX) and cast materials where built‑up edge can otherwise be an issue. The cutter is rated very good for steel and stainless steel, good for castings, and conditionally suitable for non‑ferrous metals and special alloys; these suitability markers support sound process planning. The short overall length and a Ø10 mm shaft support compact fixturing and reduce overhang, while the protected 45° chamfer and centre‑cut design ease engagement in vertical entry tasks. For reliable HSS‑Co tooling from TECWERK and tailored application advice, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and expert consultation. Technical data Article number: 2000866059NW Standard: DIN 844 Product label: Schaftfräser DIN 844 Typ HR D.10mm HSS‑Co PM ALCRONA Weldon Z.4 kurz TECWERK Manufacturer: TECWERK Facts Diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 4 mm Relief length: 9.5 mm Flutes: 4 Shank diameter: 10 mm Packaging unit: 1 Special features Material: HSS‑Co PM Coating: ALCRONA Type: HR, short design Cutting direction: right‑hand cut Centre cutting capability Weldon shank with drive flat 45° protection chamfer Suitable for materials up to approx. 1400 N/mm² tensile strength Material suitability: steel (very good), stainless steel/INOX (very good), cast (very good), non‑ferrous metals (conditional), special alloys (conditional) FAQ What materials is this cutter best suited for? This TECWERK end mill is very well suited to steel and stainless steel (INOX) and also performs well on cast materials; non‑ferrous metals and special alloys are conditionally suitable. Is the cutter suitable for plunge milling? Yes, the centre‑cutting geometry and 4‑flute design of the TECWERK end mill allow plunge entry and efficient pocketing operations. What does the ALCRONA coating provide? The ALCRONA coating increases wear resistance and heat tolerance, extending tool life and improving process stability under higher cutting temperatures. Can the tool be clamped in standard toolholders? The Weldon shank is designed for secure clamping in standard Weldon holders, offering positive drive and good concentricity for repeatable setups. What is the article number or SKU for ordering? Order reference: 2000866059NW for the TECWERK short HSS‑Co PM, ALCRONA coated 10 mm end mill. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of TiCN wear protection, a HSS‑Co5 substrate and a secure Weldon shank for reliable milling of tougher steels; order the tool directly via Metav Werkzeuge or request technical advice from the consultants in Emmerich. TECWERK Cylindrical Shank End Mill (DIN 844 Type HR) Ø10 mm, TiCN-coated HSS‑Co5, Weldon A robust TECWERK end mill designed for short, high-performance milling tasks in workshop and production environments, featuring a Ø10 mm cutting diameter and a 30 mm effective length for deep but controlled engagement. TiCN coating for extended tool life HSS‑Co5 substrate for high toughness Four-flute, centre-cutting geometry Weldon shank with drive flat Consistent cutting performance for demanding steels The short, four‑flute cutter is built on a HSS‑Co5 substrate and finished with a TiCN coating to combine toughness with improved wear resistance. With a nominal diameter of Ø10 mm, an effective length of 30 mm and an overall length of 72 mm, the tool sustains dimensionally stable cutting under moderate to heavy loads. Its DIN 844 designation signals a standardised geometry, while the right‑hand cutting orientation and centre‑cutting capability permit plunge milling and conventional milling operations without modification. The result is dependable cycle times and predictable tool life when used within the stated material limits. Geometry engineered to improve chip control and surface quality The cutter’s four‑flute design and finely ground profile yield a balance between chip evacuation and surface finish: multiple cutting edges increase feed capacity while the refined flute geometry prevents chip packing in shoulder and pocket operations. The short construction and the specified relief‑ground profile support stable cutting at higher feeds, delivering improved surface integrity on finished components. The incorporated 45° protective chamfer at the cutting edge reduces burr formation and extends edge life, which translates into fewer tool changes and more consistent part quality. Secure clamping and machine compatibility for repeatable results A cylindrical shank with Weldon drive flat ensures positive torque transmission and quick, repeatable tool changes in standard toolholders. The weldon flat is particularly suitable for setups where axial forces and torque must be absorbed without slippage. Combined with the cutter’s compact dimensions and balanced geometry, this results in stable machining with reduced vibration and excellent concentricity. Users benefit from easier setup and repeatable positional accuracy on series work or when swapping tools between machines. Broad application range with clear material guidance The tool is specified for machining materials up to approximately 800 N/mm² with an uncoated cutter and up to 1,200 N/mm² when the TiCN coating is employed, making it well suited to a wide range of steels and cast components. According to the tool’s application profile, steel and cast iron are very well suited, while non‑ferrous metals, stainless steels and special alloys are conditionally suitable depending on cutting data and coolant strategy. The combination of a tough HSS‑Co5 core and the hard TiCN layer offers a pragmatic compromise between fracture resistance and wear performance for mixed production environments. For procurement or detailed process support for the TECWERK TiCN‑coated HSS‑Co5 end mill, contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) to discuss suitability for the intended application and to arrange supply. Technical data Article number: 2000866510NW Standard: DIN 844 Manufacturer: TECWERK Product type: Cylindrical shank end mill Specifications Diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Shank diameter: 10 mm Cutting edges: 4 Relief grind length: 9.5 mm Cutting direction: Right‑hand Features & applications Material: HSS‑Co5 Coating: TiCN Weldon shank / drive flat Four‑flute, centre‑cutting geometry Short Type HR with 45° protective chamfer Suitable for steel: very well Suitable for cast iron: very well Suitable for non‑ferrous metals: conditionally suitable Suitable for stainless steel and special alloys: conditionally suitable Recommended for machining up to ~800 N/mm² (uncoated) and ~1,200 N/mm² (coated) FAQ What materials is this end mill best suited for? The Tecwerk TiCN‑coated HSS‑Co5 end mill is specified as very well suited for steel and cast iron, with conditional suitability for non‑ferrous metals, stainless steels and special alloys depending on cutting parameters and coolant. Does the cutter allow plunge milling? Yes. The centre‑cutting geometry and four‑flute design permit plunge operations; the tooth form and centre cut enable direct entry into the material. How does the TiCN coating affect performance? The TiCN layer increases surface hardness and reduces adhesive wear, extending tool life and allowing machining of higher‑strength steels (up to around 1,200 N/mm² under recommended conditions). Is the shank compatible with common toolholders? The cylindrical shank with Weldon drive flat is compatible with standard Weldon clamping systems and provides secure torque transmission for repeatable setups. What standard does the tool comply with and how many flutes does it have? The cutter conforms to DIN 844 and features four flutes, a configuration that balances material removal rate and surface finish. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

High-performance combination of solid carbide rigidity and TiAlN wear protection for sustained productivity; 45° helix and four flutes deliver reliable chip control and fine surface finish. Order the tool directly via Metav Werkzeuge or consult the team for cutting-data advice. TECWERK End Mill DIN 6527 L, Ø10 mm, VHM, TiAlN — long 4‑flute cutter The TECWERK End Mill DIN 6527 L, Ø10 mm, VHM, TiAlN is a long-reach, four-flute cutter designed for universal roughing and finishing tasks, especially in steel and stainless-steel applications. Long reach with DIN 6535 HB shank Solid carbide (VHM) for rigidity TiAlN multilayer coating for heat resistance 45° helix, 4 flutes for smooth finish Consistent performance in steel and stainless-steel machining Built from solid carbide with a TiAlN multilayer coating, this cutter offers a combination of wear resistance and thermal stability that supports extended cutting cycles. The coating reduces chemical adhesion at elevated temperatures, which helps to maintain edge integrity during continuous operations. As a result, the tool is particularly effective when machining carbon steels and stainless steel, where both hardness and heat build-up are common concerns. The construction supports both efficient material removal and reproducible surface quality. Geometry that balances aggressive metal removal with fine finishing The tool’s 45° helix and four-flute configuration deliver stable cutting forces and controlled chip formation. The specific cutter geometry, developed for high stability, allows use in both roughing and finishing passes while producing an improved surface texture that reduces the need for secondary operations. Features such as the integrated chip splitter and unequal flute spacing further break chips and reduce vibration, enhancing dimensional accuracy and protecting spindle bearings during heavier cuts. Extended reach and machine-friendly shank for flexible setups Manufactured as a long version to DIN standards, the cutter includes a cylindrical shank to DIN 6535 HB, offering secure clamping and compatibility with standard toolholders. The long overall length expands reach into deep pockets and complex fixtures without compromising rigidity thanks to the optimised flute geometry. The right‑hand cutting direction and 4 mm effective cutting length suit component work with restricted axial engagement while the 10 mm shank and body simplify tool-change logistics on conventional CNC milling machines. Application advantages and workshop efficiency Designed for universal use, the cutter reduces tool inventory by covering a range of tasks from heavy roughing to finishing. The combination of solid carbide core and TiAlN coating leads to fewer tool changes and improved uptime. For operations where thermal resistance and edge retention determine cycle reliability, the tool offers a measurable benefit in throughput and surface consistency. Metav Werkzeuge’s product selection and technical advice complement this capability, enabling seamless integration into industrial workflows. Contact Metav Werkzeuge today to discuss TECWERK end mills in relation to specific materials, cutting parameters and holder compatibility, or request detailed cutting-data sheets from our Emmerich technical team Technical Data Article number: 2000866689NW Designation: End mill (Schaftfräser) Standard: DIN 6527 Manufacturer: TECWERK Shank standard: DIN 6535 HB Facts Diameter: 10 mm Overall length: 72 mm Cutting length: 4 mm Flutes: 4 Shank diameter: 10 mm Helix angle: 45° Cutting direction: right‑hand Special features Material: solid carbide (VHM) Coating: TiAlN (multilayer) Long version (DIN 6527 L) With chip splitter and unequal flute spacing Designed for roughing and finishing Very good suitability for steel and stainless steel Limited suitability for non‑ferrous metals and special alloys Suitable for cast materials under conditions FAQ Which materials is the cutter best suited for? The TECWERK end mill is very well suited for steel and stainless steel, with limited suitability for non‑ferrous metals and certain special alloys; the combination of VHM and TiAlN supports these recommendations (SKU 2000866689NW). Can the tool be used for both roughing and finishing? Yes, the cutter’s geometry and coating are designed to perform in roughing and finishing operations, offering stability for higher feeds and the surface finish expected from a four‑flute design. What shank standard does the tool use and why is that important? The tool features a cylindrical shank to DIN 6535 HB, ensuring secure clamping in standard holders and compatibility with most machine tool interfaces. How does the TiAlN coating affect tool life? The TiAlN multilayer coating increases temperature resistance and reduces abrasive wear, extending tool life especially in high‑temperature cuts and longer cycle times. Is this cutter suitable for deep pocketing and long reach operations? The long version (DIN 6527 L) with a 72 mm overall length provides extended reach; the optimised flute geometry maintains rigidity for such applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co8 construction combined with a Weldon shank and four‑flute geometry for reliable clamping, consistent chip control and predictable component finish; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK DIN 844 Type N 10 mm HSS‑Co8 Shank End Mill — 4‑flute, Weldon TECWERK DIN 844 Type N 10 mm HSS‑Co8 Shank End Mill is a short, centre‑cut, four‑flute milling cutter designed for precise milling of steel and cast iron in both workshop and production environments. HSS‑Co8 for improved heat resistance Four‑flute geometry for smooth surface finish Weldon shank for positive clamping Centre‑cut design for plunge capability Reliable material performance for throughput and repeatability The HSS‑Co8 specification delivers elevated red hardness and wear resistance compared with standard high‑speed steels, which supports stable cutting in medium‑duty production. Conforming to DIN 844 Type N, the tool’s geometry and 4‑flute configuration are tuned to balance metal removal and surface quality, so machining cycles remain efficient without sacrificing repeatability. The construction is particularly suitable for steel up to 800 N/mm² in uncoated form, providing a transparent basis for process planning. Clear benefits in chip control and surface finish A centre‑cut profile enables controlled plunging, while the four cutting edges reduce radial cutting forces for a finer machined surface. The combination of right‑hand cut and precise flute spacing minimises vibration and promotes consistent chip evacuation in slotting and peripheral milling operations. For workshops that prioritise finish and dimensional control, this geometry reduces secondary operations and improves first‑pass acceptance rates. Practical clamping and handling for faster set‑ups The Weldon shank (cylindrical shank with drive flat) guarantees a secure, positive clamping interface in standard toolholders and reduces the risk of slippage during interrupted cuts. With a 10 mm diameter and an overall length 72 mm, the tool offers a compact footprint for close‑quarters fixturing while the effective length 30 mm supports reach into tighter setups. These mechanical properties simplify tool change routines and shorten machine downtime. Application scope and workshop compatibility This short shank end mill is a pragmatic choice for mixed‑purpose shops processing a range of materials: very good performance on steel and cast iron, with conditional suitability for non‑ferrous metals and stainless steels as noted in the technical specifications. Uncoated by default, the cutter is optimised for manual and CNC operations up to a practical strength threshold; coating options can extend capacity where increased surface hardness is present. The tool’s compact design suits both serial production and job‑shop tasks where reliability counts. For targeted purchasing or process recommendations contact Metav Werkzeuge — our consultants will advise on suitable holder types, machining parameters and availability for TECWERK cutters. Technical Data Article number: 2000866332NW Manufacturer: TECWERK Standard: DIN 844 Product type: Shank end mill Facts Diameter: 10 mm Shank diameter: 10 mm Overall length: 72 mm Cutting length: 4 mm Effective length: 30 mm Relief/clearance: 9.5 mm Number of flutes: 4 Cutting direction: right‑hand Special features Material: HSS‑Co (HSS‑Co8) Weldon shank with drive flat DIN 844 Type N, short version Centre‑cut (plunge capable) Very good for steel and cast iron; NE‑metals and INOX conditionally suitable Uncoated FAQ Which materials is this cutter best suited for? The TECWERK DIN 844 Type N 10 mm shank end mill is very well suited to steel and cast iron; non‑ferrous metals and stainless steel are conditionally suitable as stated in the product data. Can this end mill plunge into material? Yes, the centre‑cut design enables plunge capability so the tool can be used for indexed pocketing and limited plunging operations. What clamping system is recommended for reliable use? Use toolholders that accept a Weldon shank with a drive flat; the Weldon interface on this TECWERK cutter secures positive clamping and reduces slippage under interrupted cuts. Is the cutter supplied with a coating for higher strength materials? This specific item is uncoated; machining up to approximately 800 N/mm² is recommended for the uncoated tool, while coated grades extend suitability up to around 1000 N/mm². How many cutting edges and what finish can be expected? The tool has four flutes, which promotes a smoother surface finish and balanced cutting forces for many finishing and semi‑finishing passes. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co8 durability, a 53 mm effective cutting length and the standardised reliability of DIN 844 for consistent long‑reach milling. Order the cutter directly via Metav Werkzeuge or consult the technical team for application advice. TECWERK End Mill DIN 844 Type N – 10 mm, HSS‑Co8, Long 4‑Flute with Weldon Shank A TECWERK end mill DIN 844 Type N designed for long‑reach milling in steel and castings, offering centre cutting capability and a secure Weldon shank for stable clamping HSS‑Co8 construction for high wear resistance DIN 844 Type N — long design for deep pocket work 4‑flute centre‑cut for axial plunging Weldon shank with drive flat for secure clamping Predictable long‑reach performance for deep machining The long design, compliant with DIN 844, delivers reach where standard end mills fall short while maintaining predictable results. With a 10 mm diameter and an effective cutting length of 53 mm, the tool permits access into deeper slots and pockets with fewer tool changes. The high‑cobalt steel composition balances toughness and wear resistance to limit premature edge wear when used within its material limits. Material suitability and recommended application range Made from HSS‑Co8 (high‑speed steel with around 8% cobalt), the cutter is optimised for machining medium‑strength steels and cast materials where toughness and heat resistance are required. The tool performs very well on steel and castings, while non‑ferrous metals and stainless options are conditionally suitable depending on cutting conditions. As a rule, an uncoated high‑cobalt tool like this one is appropriate for workpiece strengths up to roughly 800 N/mm², with coated variants extending that capability further. Secure clamping and axial cutting capability The Weldon shank with drive flat ensures reliable torque transmission in collets or chucks, reducing the risk of slippage during heavy cuts. The 4‑flute, centre‑cut geometry allows for axial plunging as well as peripheral milling, combining material removal efficiency with a good surface finish on successive passes. The cutter is configured for right‑hand cutting, providing conventional chip flow and stable cutting forces for standard machining setups. Practical considerations to extend tool life and quality A relief zone measuring 9.5 mm helps reduce rubbing and improves chip evacuation near the shank, which is beneficial in deeper operations. To prolong service life, ensure secure clamping, adjust feeds and speeds to the workpiece and machine rigidity, and employ appropriate coolant or lubrication for the material being machined. Routine inspection of cutting edges will maintain consistent precision and minimise downtime. Contact Metav Werkzeuge for tailored machining recommendations and to procure the TECWERK long‑reach end mill; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000866380NW Standard: DIN 844 Brand: TECWERK Product type: End mill (Type N) Facts Diameter: 10 mm Overall length: 95 mm Effective cutting length: 53 mm Cutting length: 4 mm Shank diameter: 10 mm Number of flutes: 4 Relief (free clearance): 9.5 mm Special features Material: HSS‑Co8 Long design (Type N) Centre cutting (axial plunge capable) Weldon shank (drive flat) Right‑hand cutting Very good suitability for steel and castings, conditional suitability for non‑ferrous metals and stainless FAQ What materials is this end mill best suited for? The TECWERK end mill (DIN 844 Type N, SKU 2000866380NW) is very well suited for steel and castings, with conditional suitability for non‑ferrous metals and stainless depending on cutting parameters. Can this tool be used for plunge milling? Yes. The cutter’s 4‑flute centre‑cut geometry allows axial plunging as well as conventional peripheral milling, enabling plunge operations where required. How is the shank secured in the toolholder? The tool features a Weldon shank with drive flat, designed to prevent slippage and ensure secure clamping under moderate to heavy cutting conditions. Is the cutter coated? This specific tool is supplied uncoated in HSS‑Co8; coating can increase surface hardness and allow higher workpiece strength applications, but the supplied variant is optimised for toughness and heat resistance without coating. What is the effective cutting length and why does it matter? The effective cutting length is 53 mm, which determines the deep‑reach capability of the cutter and helps assess whether the tool can access the required machining depth without extensions or multiple setups. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The combination of VHM construction, a TiAlN special coating and a long design ensures reliable performance for roughing and finishing of non‑ferrous metals; this reduces rework and keeps cycle times steady. Order the TECWERK long solid carbide end mill directly via Metav Werkzeuge or contact our consultants for tailored advice. TECWERK solid carbide long end mill (DIN 6527 L, 10 mm) — 38/40° helix, 3 flutes A TECWERK long solid carbide end mill designed for efficient plunge, ramp and peripheral cutting in non‑ferrous metals and light alloys. Solid carbide (VHM) long design TiAlN special coating prevents build‑up 38/40° helix with 3 flutes Centre‑cutting for plunge operations Precision cutting for non‑ferrous production environments Made from VHM (solid carbide) and finished with a TiAlN-based special coating, this long end mill provides a hard, wear‑resistant cutting edge that reduces adhesion when machining aluminium and copper. The tool’s 10 mm nominal diameter and 3‑flute layout combine stiffness with efficient chip evacuation, which helps maintain consistent material removal rates. The cutter’s centre‑cutting geometry enables true plunging and ramping, so that complex toolpaths can be executed without the need for separate drilling operations. These technical choices translate directly into shorter cycle times and fewer tool changes on production racks. Stable running and superior surface finish through helix and geometry An unequal Z.3 helix with a 38/40° helix angle reduces harmonic excitation and delivers a vibration‑damped cut, improving surface quality even at elevated feedrates. The long shank and cylindrical shank (DIN 6535 HB) provide reliable clamping, while the halsfreischliff (neck relief) and 45° protective chamfer with a 0.2 mm edge radius minimise contact at the neck and protect the cutter edge during entry and exit. Together, these geometric details preserve tool life and promote repeatable finishes, especially when alternating between roughing and finishing passes on light alloys and other non‑ferrous materials. Application benefits, handling and productivity gains Optimised for roughing and finishing of aluminium, copper and similar non‑ferrous metals, the tool’s long effective length and vibration‑reducing spiral allow higher material removal where a longer reach is necessary. The combination of special coating and solid carbide substrate supports higher cutting speeds while keeping built‑up edge to a minimum, reducing manual rework. The right‑hand cutting direction and centre‑cutting capability make the cutter versatile for both conventional milling and more aggressive strategies; as a result, machining programmes can be simplified and throughput increased without compromising surface integrity. Contact Metav Werkzeuge for expert selection of the TECWERK long solid carbide end mill or request a tailored machining recommendation from our technical team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number / SKU: 2000806567NW Manufacturer: TECWERK Standard: DIN 6527 Key measurements Diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 3 mm Shank diameter: 10 mm Number of flutes: 3 Helix angle: 38/40° Neck relief (freischliff): 9.5 mm Protective chamfer: 0.2 mm Materials & features Material: VHM (solid carbide) Coating: Special coating (TiAlN-type) Cutting direction: Right‑hand cutting Centre‑cutting Long version, DIN 6527 L, Type W Cylindrical shank according to DIN 6535 HB Z.3 with unequal helix pitch for low vibration Suitable for roughing and finishing of aluminium, copper and other non‑ferrous metals 45° protective chamfer, 3 cutting edges FAQ What materials are best machined with this long solid carbide end mill? The TECWERK long solid carbide end mill is optimised for aluminium, copper and other non‑ferrous metals, delivering excellent chip evacuation and surface finish when used at recommended speeds and feeds. Can this cutter be used for plunging operations? Yes, the cutter’s centre‑cutting geometry allows controlled plunging and ramping, so drilling operations can often be avoided in favour of direct plunge cycles. How does the Z.3 unequal helix affect machining performance? The Z.3 arrangement with unequal helix pitch reduces vibration and distributes cutting forces, which improves surface quality and extends tool life compared with equal‑pitch alternatives. Is the coating suitable for high cutting speeds? The TiAlN-type special coating increases thermal resistance and prevents build‑up, making the cutter well suited to elevated cutting speeds typical for non‑ferrous machining. What shank standard does the tool use for clamping? The tool features a cylindrical shank to DIN 6535 HB, ensuring compatibility with standard collets and toolholders for secure clamping and minimal runout. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of solid carbide construction, TiAlN coating and standardised shank design for long tool life and consistent performance in demanding steel applications. Order the TECWERK long end mill directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TECWERK End Mill DIN 6527L — 10 mm, VHM, TiAlN, long The TECWERK end mill is a long, multi-flute solid-carbide cutter designed for robust machining of steels and alloyed materials in industrial production. Solid carbide construction (VHM) TiAlN coating for high-temperature wear resistance 45° helix for reliable chip evacuation Cylindrical shank to DIN 6535 HB, centre cutting Durable cutting performance for demanding steel work The combination of solid carbide (VHM) and a TiAlN coating gives a clear advantage where heat and abrasion are significant factors. The coating acts as a thermal barrier and increases surface hardness, which helps to reduce flank wear during prolonged high-speed cuts. For workshops and production lines processing ferrous components, this configuration translates into longer tool life, fewer tool changes and more predictable machining cycles. Long reach with standardised shank for secure clamping With an overall length of 72 mm, a cutting length of 4 mm and a 10 mm diameter, the cutter provides extended reach while maintaining rigidity for accurate cuts. The cylindrical shank to DIN 6535 HB ensures compatibility with standard collet and chuck systems, simplifying tool setup and repeatability across machines. Compliance with DIN 6527L further supports quality-assured handling in manufacturing environments that demand standardised tooling. Versatility across materials and secure plunge capability The tool is a four-flute, centre-cutting design with a right-hand rotation and a 45° helix, delivering a balance between smooth chip evacuation and surface finish. The cutter is marked as very well suited for steel and conditionally suitable for non-ferrous metals, special alloys and cast materials. The centre-cutting geometry enables plunge operations and enhances flexibility for complex features or finishing passes, while the multi-flute arrangement supports higher feed rates and finer finishes where required. Operational efficiency and process reliability Adopting a long, multi-flute solid-carbide cutter with TiAlN pays off through improved tool life and more stable machining processes. The helix geometry aids chip control, reducing recutting and heat build-up at the cutting zone, which contributes to consistent surface quality and reduced rework. For production-focused shops seeking fewer interruptions and predictable maintenance intervals, this cutter delivers a pragmatic blend of performance, repeatability and low supervision overhead. Specify the TECWERK long solid-carbide end mill via Metav Werkzeuge for optimised production results — contact Metav Werkzeuge for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and machine setups Technical data Article number: 2000866625NW Standard: DIN 6527 Manufacturer: TECWERK Data Diameter: 10 mm Overall length: 72 mm Cutting length: 4 mm Flutes: 4 Shank diameter: 10 mm Special features Material: solid carbide (VHM) Coating: TiAlN Helix angle: 45° Centre cutting, right-hand Cylindrical shank to DIN 6535 HB Long version, multi-flute FAQ Is this cutter suitable for plunge milling? The TECWERK long end mill features a centre-cutting geometry that allows plunge milling; it is designed for controlled axial engagement and spot drilling followed by peripheral passes. Which materials are best machined with this cutter? The cutter is very well suited for machining steel, with conditional suitability for non-ferrous metals, special alloys and cast materials as specified by the product data. How does the TiAlN coating benefit the tool life? TiAlN on the TECWERK solid-carbide cutter increases high-temperature resistance and reduces wear, which typically extends service intervals and improves consistency in serial production. Will the shank fit standard toolholders? Yes — the cylindrical shank conforms to DIN 6535 HB, ensuring compatibility with standard collets and chucks used in most milling setups. What feed and speed considerations apply to a four-flute long cutter? The four-flute geometry supports higher feed per tooth for improved productivity while the long design requires attention to rigidity and chatter control; the tool is optimised for stable feeds in steel machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co8 construction, TiCN coating and a secure Weldon shank for long, reliable milling operations; the long DIN 844 Type N geometry ensures consistent chip control and a stable clamping solution. Order the TECWERK end mill directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK End Mill D844 Type N — 10 mm, HSS‑Co8, TiCN, long, 4‑flute the TECWERK End Mill D844 Type N is a long, centre‑cutting HSS‑Co8 tool with TiCN coating designed for precision milling of medium‑strength steels, stainless materials and cast components in workshop and industrial settings HSS‑Co8 high‑cobalt tool steel TiCN coating for increased tool life Long 4‑flute design, DIN 844 Type N Weldon shank with centre cutting Consistent performance on medium‑strength steels and stainless alloys The long HSS‑Co8 construction combined with a TiCN coating provides a balance between toughness and wear resistance, making the tool particularly effective on medium‑strength steels and stainless materials. With the uncoated geometry suited to materials up to around 800 N/mm² and the coated tool qualifying for machining up to 1,200 N/mm², this cutter brings measurable process reliability. These specifications translate into fewer tool changes and steadier surface quality during serial production or repair tasks. Geometry that improves chip control and surface finish The four‑flute long configuration and centre‑cutting ability offer axial engagement for plunge and peripheral milling while maintaining effective chip evacuation over an effective length of 53 mm. The right‑hand cutting direction and the Weldon-style shank ensure secure clamping and torque transmission in standard toolholders. As a result, the cutter delivers a cleaner finish and stable dimensional results even in extended passes, reducing rework and boosting throughput in small‑batch and production environments. Workshop integration and selection guidance With a 10 mm diameter and a total length of 95 mm, this long solid‑tool format fits common milling fixtures and provides reach for deeper pockets and stepped features. The tool’s material suitability is reflected in its performance: very good for steel, stainless and cast components, conditional for non‑ferrous metals and special alloys. For applications where process consistency matters, the welded shank clamping and coated cutting edges contribute to lower variability and predictable tool life. If further machining parameters are needed, Metav’s consultants are available to advise on feeds, speeds and fixture compatibility to match the machining strategy. For workshop precision and reliable long cutting performance, contact Metav Werkzeuge for tailored advice and to secure the TECWERK long HSS‑Co8 end mill with TiCN coating, supplied from Emmerich with dependable delivery. Technical information Article number: 2000866402NW Designation: Schaftfräser D844 Type N, 10 mm, HSS‑Co8, TiCN, Weldon Manufacturer: TECWERK Standard: DIN 844 Facts Diameter: 10 mm Shank diameter: 10 mm Total length: 95 mm Effective length: 53 mm Cutting length: 4 mm Number of flutes: 4 Relief length: 9.5 mm Packaging unit: 1 Special features Material: HSS‑Co (high‑cobalt high‑speed steel) Coating: TiCN Weldon shank for secure clamping Centre‑cutting geometry Right‑hand cut Long version, DIN 844 Type N Suitability: very good for steel, INOX and cast; conditionally suitable for non‑ferrous and special alloys Application range: up to ~800 N/mm² uncoated, up to ~1,200 N/mm² coated FAQ What materials is this long HSS‑Co8 end mill best suited for? The TECWERK end mill is very well suited for steel, stainless steel (INOX) and cast materials; it is conditionally suitable for non‑ferrous metals and special alloys. Can this cutter be used for plunge milling? Yes. The centre‑cutting geometry allows axial engagement, making the long DIN 844 Type N tool suitable for plunge and peripheral milling operations. What clamping interface does the tool use? The cutter features a Weldon shank for secure mechanical clamping and reliable torque transmission in compatible toolholders. How does the TiCN coating affect performance? The TiCN coating increases wear resistance and raises the practical machining range to about 1,200 N/mm², extending tool life under higher‑strain conditions compared with the uncoated variant. Which dimensions are critical when selecting a holder for this cutter? Important dimensions are the 10 mm shank diameter and the total length 95 mm with an effective cutting length of 53 mm; ensure the toolholder provides adequate clamping length for the Weldon shank. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS‑Co5 construction, a 4‑flute geometry and a secure Weldon TW shank, this cutter provides reliable finishing and repeatable clamping for steel and cast‑iron workpieces; it is especially suited to operations where rigidity and runout control matter. Order the TECWERK end mill directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK HSS‑Co5 End Mill D 10 mm – DIN 844 Type HR, 4‑flute (Weldon TW) The TECWERK HSS‑Co5 End Mill D 10 mm is a DIN 844 Type HR shank cutter engineered for precision milling and finishing of steel and cast iron components. HSS‑Co5 alloy for high wear resistance Short 4‑flute design for stable finishing Weldon TW shank with drive flat for secure clamping Suitable for steel and cast iron up to ≈800 N/mm² Better throughput through material‑matched tooling The tool’s HSS‑Co5 composition offers higher hot hardness compared with conventional high‑speed steels, which translates into improved edge life when machining tougher grades. As a result, the cutter maintains cutting geometry longer under thermal load, reducing the frequency of tool changes and supporting steady production cycles. The specification that uncoated tools are suitable up to approximately 800 N/mm², with higher limits achievable when using coated variants, gives a clear baseline for tool selection and process planning. This makes the cutter a rational choice where cost‑effective endurance is required. Secure clamping and reduced vibration for consistent surface quality A short 4‑flute profile combined with the Weldon TW cylindrical shank with drive flat ensures positive torque transmission and low runout in standard toolholders. The D 10 mm geometry with an effective cutting length 30 mm and overall length 72 mm provides a compact, rigid package that minimises deflection during light to medium finishing passes. The presence of a centre cut allows light plunging and positional entry, while the 45° protective chamfer contributes to edge robustness. Together these design elements help achieve repeatable surface finish and dimensional stability on production parts. Practical integration and material suitability Manufactured to DIN 844 Type HR dimensions, the cutter is optimised for practical use in workshop and industrial environments. It is right‑hand cutting and presents a fine relieved cord profile that supports clean chip formation. Material suitability is clearly defined: steel (very well suited), cast iron (very well suited) and non‑ferrous metals (conditionally suitable). The tool features a relief zone of 9.5 mm where specified, improving clearance and reducing rubbing in deeper slots. For best results, pair the cutter with appropriate feeds and speeds for HSS‑Co tooling and ensure secure holder clamping to exploit the cutter’s rigidity. For application advice or availability of the TECWERK HSS‑Co5 end mill, contact Metav Werkzeuge for tailored recommendations and direct ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000866494NW Manufacturer: TECWERK Standard: DIN 844 Facts Diameter: 10 mm Overall length: 72 mm Effective cutting length: 30 mm Shank diameter: 10 mm Special features 4‑flute, right‑hand cut HSS‑Co5 material Weldon TW shank with drive flat 45° protective chamfer; centre cut; fine relieved cord profile Suitable for steel and cast iron; uncoated use up to ≈800 N/mm² FAQ What materials is this end mill best suited for? The TECWERK HSS‑Co5 end mill is very well suited to steel and cast iron; non‑ferrous metals are conditionally suitable depending on application. Can the cutter be used for plunging operations? Yes. The tool’s centre cut design allows light plunging and positional entry in suitable setups. What does the Weldon TW shank provide? The Weldon TW shank with a drive flat ensures secure clamping and positive torque transmission in holders that accept Weldon shanks. Is this tool coated? This specific version is supplied uncoated; uncoated use is rated up to approximately 800 N/mm², while coated variants extend material capability. Which standard does the geometry follow? Geometry and dimensions conform to DIN 844 Type HR, facilitating interchangeability in standardised toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining a TiCN wear-resistant coating, a HSS‑Co5 core and a four‑flute, centre‑cutting design ensures reliable performance and extended tool life in steel and cast iron milling. Order the cutter directly via Metav Werkzeuge or consult our specialists for application guidance. End mill DIN 844 Type NR, 10 mm, HSS‑Co5, TiCN (Weldon shank) — TECWERK The End mill DIN 844 Type NR is a short, robust 4‑flute shank cutter designed for milling steel and cast iron in workshop and industrial environments. TiCN coating for extended tool life HSS‑Co5 core for high wear resistance 4‑flute, centre‑cutting geometry Weldon shank with driving flat for secure clamping Increased throughput for medium‑strength materials The combination of HSS‑Co5 substrate and TiCN coating provides a pragmatic balance between toughness and wear resistance, enabling higher productive cutting parameters compared with uncoated high‑speed steels. Coated inserts and cutters reduce flank wear and friction, which in practice means more consistent cycle times and fewer tool changes. The tool is rated for milling materials up to approximately 800 N/mm² with uncoated geometry and up to 1000 N/mm² when the coating is applied, offering a clear material‑strength guideline for process planning. Precision geometry for clean results and plunge capability A 4‑flute arrangement combined with centre‑cutting geometry enables both peripheral milling and direct plunging, making the cutter versatile for pocketing and contour work. The short Type NR design with a 45° protection chamfer and a relieved profile improves chip evacuation and reduces cutting forces in interrupted cuts. With an effective length of 30 mm, the tool provides a compact cutting zone that helps maintain rigidity and surface finish when working on standard toolholders. Secure clamping and standardised dimensions Compliance with DIN 844 ensures dimensional interchangeability and predictable mounting in standard toolholders. The Weldon shank with driving flat offers reliable torque transmission and reduced risk of slippage under heavy cutting loads. Key dimensions — 10 mm nominal diameter and a 72 mm overall length — make the cutter straightforward to integrate into established setups, while the shank profile supports stable axial run‑out control for repeatable tolerances. Practical suitability across workshop applications This multi‑edge cutter shows very good suitability for steel and cast iron, with conditional applicability for non‑ferrous metals, special alloys and stainless steels depending on cutting data and setup. The short, multi‑cutter geometry is economical for batch work and small series, where reduced cycle time per feature and lower downtime for tool changes translate into measurable productivity gains. Technical simplicity and proven materials support dependable everyday use in maintenance, prototyping and medium‑volume production. For workshop applications requiring durable milling performance and secure clamping, contact Metav Werkzeuge for availability, exact delivery times and tailored technical advice on the TECWERK End mill DIN 844 Type NR (SKU 2000866440NW) Technical data Article number: 2000866440NW Standard: DIN 844 Label: Schaftfräser DIN 844 Typ NR D.10mm Einsatz‑L.30mm HSS‑Co5 TiCN Weldon TW Manufacturer: TECWERK Facts Material: HSS‑Co5 Coating: TiCN Diameter: 10 mm Shank diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 4 mm Number of flutes: 4 Cutting direction: right‑hand Free relief: 9.5 mm Special features Weldon shank with driving flat Type NR — short, multi‑cutter design 45° protection chamfer Centre‑cutting for plunge capability Relieved profile for improved chip evacuation Very good for steel and cast iron; conditional for NE‑metals, special alloys, INOX FAQ Which materials is this cutter best suited for? The TECWERK End mill DIN 844 Type NR is very well suited to steel and cast iron; non‑ferrous metals, special alloys and stainless steels are conditionally machinable depending on cutting data. Can the tool be used for plunge milling? Yes, the centre‑cutting geometry enables plunge operations as well as peripheral milling, allowing the cutter to perform pocketing and contouring tasks. What clamping system is recommended? The Weldon shank with driving flat on the TECWERK cutter provides secure clamping in standard Weldon holders and reduces slippage under higher torque. How does the TiCN coating affect performance? The TiCN coating reduces wear and friction, improving life and allowing higher cutting parameters; with coating, material strength capability increases towards 1000 N/mm². Which standard ensures dimensional compatibility? The cutter conforms to DIN 844, which standardises dimensions and facilitates predictable integration into common toolholders. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of robust HSS‑Co5 construction and a TiCN surface finish for extended tool life and stable performance in demanding milling operations; order via Metav Werkzeuge or consult the team for application advice. End mill DIN 844 Type HR — 10 mm HSS‑Co5 TiCN (Weldon shank) by TECWERK The End mill DIN 844 Type HR — 10 mm HSS‑Co5 TiCN (Weldon shank) is a long, four‑flute HSS‑Co cutter designed for machining steel and cast iron in general milling and deep‑reach applications. HSS‑Co5 core for high toughness TiCN coating for enhanced wear resistance 4‑flute long design for deep cuts Weldon shank with drive flat for secure clamping Increased uptime through material and coating synergy The combination of HSS‑Co5 substrate and TiCN coating provides a balance between fracture resistance and wear protection that is particularly advantageous when machining tougher steels. Conforming to DIN 844, the tool offers predictable geometry and repeatable performance so that cycle times remain consistent. The resulting benefit is a lower frequency of tool changes and reduced production interruptions, which supports continuous throughput in small‑batch and series production environments. Stable cutting geometry for precise deep milling The long, 4‑flute profile with a centre‑cutting design and a 45° protective chamfer ensures secure chip evacuation and reduced vibration during axial engagement. The Weldon shank with a drive flat improves clamping stability in standard holders, translating into more consistent surface finish and dimensional control in pockets and slots. These geometric choices make the cutter well suited to vertical and horizontal machining centres where reach and rigidity are decisive for process reliability. Broad material suitability lowers tooling complexity Designed for work up to approximately 1200 N/mm², the tool shows very good suitability for steel and cast iron, and conditional performance on non‑ferrous metals and special alloys. This material versatility allows consolidation of tool lists for mixed‑material workloads, helping to simplify inventory and reduce changeover times while maintaining machining quality across different components. Practical dimensions and handling for workshop use With a nominal diameter of 10 mm, an effective cutting length of 53 mm and an overall length of 95 mm, the cutter provides the reach required for deep features without compromising on stiffness. Right‑hand cutting geometry supports standard CNC programming practices and conventional feeds. The centre‑cutting capability enables controlled plunging where necessary, making the tool a flexible choice for both slotting and contouring operations. Discuss specific applications with Metav Werkzeuge — our specialists can advise on clamping, holder compatibility and process parameters to make the most of the TECWERK end mill and its TiCN surface Technical data Article number: 2000866550NW Standard: DIN 844 Product label: Schaftfräser DIN 844 Typ HR D.10mm Einsatz-L.53mm HSS-Co5 TiCN Weldon TW Manufacturer: TECWERK Dimensional data Diameter: 10 mm Overall length: 95 mm Effective cutting length: 53 mm Shank diameter: 10 mm Cutting edges: 4 Relief length: 9.5 mm Cutting direction: right‑hand cutting Materials & special features Material: HSS‑Co (high‑speed steel with cobalt) Coating: TiCN Type: long, Type HR, four‑cutting‑edge end mill Shank: cylindrical with drive flat (Weldon) Centre cutting: yes 45° protective chamfer and fine honed profile Best suited: steel and cast iron; conditionally suitable for non‑ferrous metals, stainless and special alloys FAQ What materials can this cutter machine effectively? The TECWERK End mill DIN 844 Type HR (SKU 2000866550NW) is very well suited to steel and cast iron up to around 1200 N/mm², with conditional capability on non‑ferrous metals and special alloys. Is the cutter suitable for plunge milling? Yes — the centre‑cutting geometry of the TECWERK end mill permits controlled plunging and makes it usable for slotting as well as contour milling. How does the TiCN coating help in production? The TiCN coating reduces abrasive wear and extends tool life under higher thermal loads, helping to maintain dimensional accuracy over longer batch runs with the HSS‑Co5 core. What clamping system is recommended for reliable results? Use a holder that securely accepts a Weldon shank with a drive flat to ensure clamping stability; the Weldon interface on the TECWERK tool reduces the risk of slippage during heavy engagement. Which tool features improve chip control in deep cuts? The long 4‑flute geometry combined with the 45° chamfer and honed profile aids chip formation and evacuation, improving stability and surface finish in deep milling operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a short, high‑stiffness 10 mm cutter combining HSS‑Co PM metallurgy with an ALCRONA coating for reliable surface quality and reduced vibration; order directly via Metav Werkzeuge or request advice from our consultants for application‑specific selection. TECWERK 10 mm HSS‑Co PM end mill (DIN 844 Type N) — ALCRONA coated, Weldon shank, 4‑flute short version A TECWERK 10 mm HSS‑Co PM end mill engineered for short‑length milling and centre‑cut operations in steels, stainless steel and cast materials in workshop and industrial environments ALCRONA coating for longer wear resistance HSS‑Co PM construction for toughness and edge stability Four‑flute geometry for improved surface finish Weldon shank for secure clamping High‑performance cutting for better productivity The combination of HSS‑Co PM substrate and an ALCRONA finish delivers a balance of toughness and wear resistance that benefits demanding milling operations. Powder‑metallurgy steel ensures consistent microstructure for sharp, durable edges while the specialised coating reduces adhesive wear and increases tool life under intermittent loads. The four‑flute geometry moderates chip flow and helps achieve consistent surface quality, making this cutter suited to production tasks where repeatability and component finish are priorities. Compact design that stabilises short‑length milling Designed as a DIN 844 Type N, the short‑length format offers a low overhang and improved rigidity compared with longer cutters. The Weldon shank secures the tool against slip in high‑torque conditions, and the conical flute root increases overall stiffness for more accurate depth control. The centre‑cut configuration enables plunge operations when needed, so the tool covers common pocketing and shoulder milling tasks without compromise. Such compactness reduces chatter and supports predictable results on small to mid‑sized components. Clear material suitability for efficient planning This cutter is specified for machining materials with low to medium tensile strength up to approximately 1000 N/mm². It is rated as very good for steel, stainless steel and castings, while performance with certain non‑ferrous and specialised alloys is conditional. The right‑hand cutting direction and the unequal flute spacing provide vibration reduction, which improves surface finish and dimensional stability when machining tougher materials. These attributes aid process planning and mean fewer rejected parts and less rework under typical shop conditions. Practical handling and workshop benefits The tool’s measured geometry — modest cutting length and restrained profile — simplifies setting and reduces cycle‑time variability. Secure clamping with the Weldon interface combined with the cutter’s short length minimises run‑out and helps maintain concentricity in serial operations. Routine inspection of the cutting edges and adherence to appropriate feeds and speeds for HSS‑Co tools will preserve performance; the integrated measures against vibration also support higher effective feed rates while maintaining finish quality. For those seeking reliable, compact cutters that integrate into existing setups, this milling cutter offers a practical balance of durability and precision. Contact Metav Werkzeuge for tailored application advice or to place an order for the TECWERK 10 mm HSS‑Co PM end mill — service and fast dispatch from Emmerich ensure a dependable supply to the workbench. Technical Data Article number: 2000866035NW SKU: 2000866035NW Manufacturer: TECWERK Product type: End mill (short, DIN 844 Type N) Standard: DIN 844 Facts Diameter: 10 mm Shank diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 4 mm Number of flutes: 4 Relief: 9.5 mm Cutting direction: Right‑hand Special features Material: HSS‑Co PM Coating: ALCRONA Weldon shank (for secure clamping) Centre‑cut for plunge milling Vibration reduction via unequal flute spacing Conical flute root for enhanced stiffness Suitable for machining up to approx. 1000 N/mm² Very good suitability: steel, stainless steel, castings Conditional suitability: non‑ferrous metals, special alloys FAQ What materials is this end mill best suited for? The TECWERK end mill is very well suited for steel, stainless steel and castings, and is specified for materials up to about 1000 N/mm², with conditional performance on some non‑ferrous and special alloys. Can this cutter be used for plunge milling? Yes. The centre‑cut geometry of the TECWERK 10 mm HSS‑Co PM end mill permits plunge operations, enabling pocketing and spot‑facing tasks where a centre‑cut tool is required. How does the ALCRONA coating affect performance? The ALCRONA coating on this HSS‑Co PM cutter reduces adhesive wear and increases edge life, contributing to consistent surface quality over extended runs with the TECWERK tool. Why is the Weldon shank important for workshop use? The Weldon shank provides secure mechanical clamping, reducing the risk of slippage under torque and improving concentricity for the TECWERK end mill during repetitive milling operations. What features reduce vibration during milling? Unequally spaced flutes and a conical flute root are designed to deliver vibration reduction and increased stiffness, which supports improved surface finish and dimensional stability with the TECWERK cutter. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co5 construction, a 4‑flute short design and a Weldon shank with drive flat for stiff, reliable milling of low‑to‑medium strength steels and castings; these properties support consistent chip control and tool life. Order the End Mill DIN 844 Type NR, Ø10 mm directly via Metav Werkzeuge or ask our consultants if needed. End Mill DIN 844 Type NR, Ø10 mm — HSS‑Co5, 4‑flute, Weldon shank (TECWERK) The End Mill DIN 844 Type NR, Ø10 mm is a short, multi‑flute HSS‑Co5 cutter designed for milling operations on steels and cast irons where rigidity and repeatable performance are required. HSS‑Co5 for enhanced wear resistance 4 flutes for improved surface finish Weldon shank with drive flat for secure clamping Centre‑cutting geometry for plunge capability High performance material pairing for consistent results Made from HSS‑Co5, the tool combines high‑speed steel with cobalt to raise hot hardness and wear resistance compared with standard HSS. This means more stable cutting when machining steel and cast iron, where tensile strengths approach ~800 N/mm² for uncoated cutters; with suitable coatings, higher strengths may be addressed. The material choice supports predictable tool life in demanding workshop conditions and reduces the frequency of tool changes, contributing to uninterrupted production. Design that reduces vibration and improves chip evacuation The short, 4‑flute configuration and the relieved core profile yield a stiffer cutter with enhanced stability for interrupted cuts and shoulder milling. A 45° chamfer and centre‑cutting geometry permit controlled entry and better axial positioning, while the polished flank geometry lowers cutting forces and improves surface finish. These design measures result in reliable chip control and lower risk of chatter, particularly in setups with limited clamping rigidity. Practical dimensions and secure holding for workshop use With an effective length of 30 mm, overall length of 72 mm and a Ø10 mm shank, the cutter balances reach and stiffness for everyday milling tasks. The Weldon shank with drive flat ensures positive torque transmission in set screws and holders, reducing slippage during heavy cuts. Right‑hand cutting direction and the tool’s centre‑cut capability allow for both peripheral milling and limited plunge work, making it suitable for machining components in small batches or repair work where flexibility matters. Secure this TECWERK HSS‑Co5 end mill via Metav Werkzeuge to benefit from a well‑balanced cutter for steel and cast‑iron applications; request technical advice or order support from Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000866424NW Product type: End mill (Schaftfräser) Brand: TECWERK Standard: DIN 844 Material: HSS‑Co5 Facts Diameter: Ø10 mm Shank diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 4 mm Number of flutes: 4 Relief length: 9.5 mm Special features Weldon shank with drive flat Short multi‑flute design (Type NR) 45° chamfer Centre‑cutting geometry Right‑hand cutting Suitable for low to medium strength steels and cast iron Uncoated tool FAQ What materials is this cutter best suited for? The End Mill DIN 844 Type NR, Ø10 mm from TECWERK is very well suited for steel and cast iron and is conditionally suitable for non‑ferrous metals, matching typical workshop requirements for these materials. Can the tool perform plunge milling? Yes. The centre‑cutting geometry of this TECWERK end mill allows limited plunge operations in addition to standard peripheral milling, enabling greater flexibility in machining sequences. How is the cutter held in the toolholder? Clamping is performed on the Weldon shank with drive flat, which secures the cutter against rotation and ensures reliable torque transmission during milling. What cutting direction and geometry does the tool use? The cutter is right‑hand cutting with a 4‑flute geometry and a 45° chamfer, combining efficient chip evacuation with stable cutting behaviour for interrupted and continuous cuts. What is the SKU for ordering or reference? The tool is supplied under SKU 2000866424NW and listed as an HSS‑Co5, 4‑flute end mill to DIN 844, Type NR. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co substrate combined with a TiCN coating and a Weldon shank for reliable chip evacuation, high wear resistance and secure clamping; order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TECWERK HSS‑Co8 TiCN 4‑flute short end mill, 10 mm, Weldon shank The TECWERK short HSS‑Co8 end mill for short‑run and high‑accuracy milling tasks in steel and stainless applications, conforming to DIN 844 Type N with a Weldon shank for positive drive. HSS‑Co8 substrate for improved toughness TiCN coating for enhanced wear resistance Weldon shank for secure clamping DIN 844 Type N short 4‑flute design High cutting reliability with a cobalt‑alloy substrate The HSS‑Co construction gives the cutter increased red‑hardness and fracture resistance compared with standard high‑speed steel, which translates into fewer tool changes and steadier process results when machining medium‑strength steels. The 4‑flute geometry supports a fine surface finish while maintaining chip control in shorter axial depths. This combination is particularly suited to operations where tool life and repeatability matter, such as serial production or small batch finishing. Longer service life through advanced surface treatment A TiCN coating reduces friction and improves abrasion resistance, allowing the tool to withstand higher cutting pressures and extending lifetime when compared to uncoated equivalents. The coating also raises the recommended cutting limit for tougher materials: coated tools handle higher strength materials more effectively. In practice, this means more consistent cycles between regrinds and lower per‑part tooling costs for components made from stainless and alloyed steels. Secure, vibration‑resistant clamping and accurate positioning The Weldon shank with a drive flat ensures positive engagement with the toolholder, reducing slippage under load and improving concentricity in high‑precision work. Combined with the tool’s short design and DIN 844 Type N specification, the cutter delivers stable machining when radial overhang is limited, making it a dependable choice for operations where rigidity determines surface integrity and dimensional accuracy. Application suitability and machining guidance Engineered for materials with low to medium strength—up to approximately 800 N/mm² uncoated and up to 1,000 N/mm² when TiCN coated—the cutter offers very good suitability for steel and stainless steel and conditional suitability for non‑ferrous metals and special alloys. The right‑hand cutting direction and central cutting geometry permit plunge entry and effective slotting in short cuts. For best results, pair the tool with a high‑rigidity collet or Weldon chuck and moderate feed per tooth to balance surface finish and tool life. For tailored advice on integrating this TECWERK HSS‑Co8 TiCN‑coated end mill into production or to request delivery from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data SKU: 2000866356NW Standard: DIN 844 Label: Schaftfräser DIN 844 Typ N D.10mm HSS‑Co8 TiCN Weldon Z.4 kurz TECWERK Facts Diameter: 10 mm Overall length: 72 mm Cutting length: 4 mm Effective length: 30 mm Shank diameter: 10 mm Flutes: 4 Cutting direction: Right‑hand Material: HSS‑Co (cobalt high‑speed steel) Coating: TiCN Special features Type N, centre cutting, short design Weldon shank with drive flat Suitable up to approx. 800 N/mm² uncoated, 1,000 N/mm² coated Very good suitability for steel and stainless steel Conditioned suitability for non‑ferrous metals and special alloys FAQ What materials is this end mill best suited for? The TECWERK HSS‑Co8 TiCN end mill is designed for very good performance on steel and stainless steel, with conditional suitability for non‑ferrous metals and special alloys; coating increases the usable hardness range. Can this cutter be used for plunge milling or slotting? Yes. The centre‑cut geometry and right‑hand cutting allow plunge entry and short slotting operations when used with appropriate feeds and a rigid toolholder. What are the advantages of the TiCN coating on this tool? The TiCN coating reduces friction, improves wear resistance and extends tool life, enabling higher cutting pressures and better performance when machining tougher materials. How does the Weldon shank benefit machining stability? The Weldon shank with a drive flat provides secure clamping and positive torque transfer, minimising slippage and improving concentricity during heavy cuts. Which standard does the cutter conform to and why is that relevant? The cutter conforms to DIN 844 Type N, indicating a short, centre‑cut end mill geometry suited to robust, accurate milling with defined dimensional and geometrical expectations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of solid carbide construction, TiAlN coating and an HPC geometry that balances aggressive material removal with a reliable surface finish; order the tool directly via Metav Werkzeuge or consult the team for technical questions. End mill DIN 6527 K Type N — 10 mm, solid carbide, TiAlN-coated (TECWERK) A End mill DIN 6527 K Type N engineered for high‑performance cutting (HPC) across steels, castings and non‑ferrous alloys; short 4‑flute design with centre‑cutting and cylindrical shank to DIN 6535 HB. *Solid carbide, fine-grain, TiAlN-coated *4‑flute design for high material removal *Centre-cutting for plunge milling *Cylindrical shank to DIN 6535 HB, h6 tolerance Faster, more durable cutting thanks to advanced geometry and coating The tool combines a solid carbide (VHM) substrate with a TiAlN surface layer and a purpose-designed high‑performance cutting geometry. This trio reduces wear and increases thermal resistance so the cutter maintains edge life under sustained loads. The 4‑flute layout and short, rigid form minimise deflection and allow higher feed rates, while the diameter 10 mm and cutting length 24 mm deliver a compact, high‑rigidity solution for both roughing and finishing cycles. DIN‑based standards ensure predictable clamping and repeatability in the toolholder. Broad material compatibility for versatile workshop use Designed with an unequal pitch and a centre‑cutting capability, the cutter tackles a wide range of materials: steels, cast iron, stainless and non‑ferrous metals, special alloys and even aluminium with silicon content. The HPC orientation and the TiAlN coating improve resistance to built‑up edge and oxidation at higher cutting temperatures, so operations remain stable when switching from semi‑finishing to aggressive stock removal. The uneven flute spacing helps to damp vibration and break chips, improving surface quality and extending tool life in mixed production runs. Precision clamping and vibration control for consistent results Clamping reliability comes from the cylindrical shank to DIN 6535 HB with h6 tolerance, supporting concentricity and reproducible runs. A vibration‑reducing neck relief and a 45° protective chamfer (0.2 mm) at the cutting edge reduce impact at entry and improve tool robustness when plunging or entering interrupted cuts. The short overall length (66 mm) further increases stiffness, making the cutter a cost‑effective choice where cycle time and surface finish are equally important. For workshop planners the result is fewer tool changes and steadier production quality. For reliable high‑performance milling in diverse materials, rely on TECWERK quality — contact Metav Werkzeuge for availability and technical assistance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000866486NW Standard: DIN 6527 Product type: End mill (short, Type N) Manufacturer: TECWERK Dimensions & core data Diameter: 10 mm Overall length: 66 mm Cutting length: 24 mm Shank diameter: 10 mm Cutting edges: 4 Shank tolerance: h6 Neck relief: 9.5 mm Materials & features Material: solid carbide (VHM · fine grain) Coating: TiAlN Cutting direction: right‑hand cutting Centre‑cutting for plunge milling Unequal pitch for vibration reduction 45° protective chamfer 0.2 mm Cylindrical shank to DIN 6535 HB Short design for high rigidity Suited for HPC, roughing and finishing Suitable for steel, cast iron, INOX, NE‑metals, special alloys, aluminium with silicon and abrasive materials FAQ What applications is this end mill best suited for? This end mill DIN 6527 K Type N (TECWERK, SKU 2000866486NW) is engineered for HPC operations including roughing and finishing in steels, cast iron, stainless steels and non‑ferrous alloys. Can the cutter be used for plunge milling? Yes; the centre‑cutting geometry allows plunge milling and the protective chamfer supports safe entry into the material with the TECWERK end mill. How does the TiAlN coating benefit machining performance? The TiAlN coating on the solid carbide substrate increases heat resistance and reduces adhesion of material to the edge, extending tool life under elevated temperatures typical in HPC. What clamping accuracy can be expected? The cylindrical shank conforms to DIN 6535 HB with h6 tolerance, providing high concentricity and repeatable positioning in standard toolholders. Is the cutter suitable for vibration‑sensitive setups? Yes; the unequal pitch and neck relief are designed to reduce chatter and support vibration‑reduced machining, improving surface finish and tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Data inconsistency detected for SKU 2000866566NW The supplied product information contains conflicting specifications that prevent a reliable product description and technical listing. The cutting length is given as 5 mm, yet the product notes also state a "3×D cutting length" — for a 10 mm diameter this would equate to 30 mm — and an effective length of 35 mm is listed elsewhere. These figures are mutually inconsistent with each other and with the designation "extra long". Additionally, the mix of metric values and descriptive length statements makes it unclear which measurements are authoritative. Please review and correct the source data to ensure consistent values for diameter, cutting length, effective length and overall length. Once the measurements are clarified, a full, accurate British English product description and technical specification can be produced. For further clarification, contact info@metav-werkzeuge.com or call +49 2822 7131930.

The combination of solid carbide construction, TiAlN coating and an extra-long design delivers extended tool life and reliable reach for deep-pocket milling; suited for both roughing and finishing operations. Order the TECWERK solid carbide end mill directly via Metav Werkzeuge or ask our consultants if needed. TECWERK extra-long solid carbide end mill D10 mm – TiAlN, 6 flutes The TECWERK extra-long solid carbide end mill is a right-hand, multi-flute cutter designed for vibration-reduced roughing and finishing across steels and non-ferrous materials Solid carbide VHM with TiAlN coating Extra-long design for deep axial reach Six flutes for high material removal rates Suitable for steel, cast iron and non-ferrous metals High-performance cutting for consistent shop-floor output Manufactured from VHM (solid carbide) and finished with a TiAlN surface layer, this cutter combines hardness and heat resistance to maintain edge stability at elevated cutting speeds. The 35–38° helix angle and six flutes balance chip evacuation with high feed rates, enabling efficient material removal while preserving surface quality. The extra-long overall length with an effective length of 35 mm allows access into deep cavities where standard tools cannot reach, reducing the need for tool changes and improving process throughput. The protective 0.2 mm chamfer extends usable life by limiting edge chipping during tool entry. One tool for varied materials reduces process complexity Thanks to a geometry optimised for universality, this cutter performs very well in steel, cast iron, temper cast materials and a wide range of non-ferrous metals, including aluminium alloys with silicon content. The design supports machining of special alloys and abrasive materials while maintaining dimensional consistency. The cylindrical shank produced to DIN 6535 HB with h6 shank tolerance ensures secure clamping, translating to reproducible results across repeated cycles. Unequal pitch and neck relief minimise chatter for vibration-reduced machining in deep or slender setups. Process reliability, clamping security and surface quality benefits Unequal pitch and a dedicated neck relief reduce harmonics during heavy cuts, improving stability when roughing. The multi-flute configuration permits higher feed per tooth and improved surface finish during finishing passes, which in turn decreases downstream rework. The tool’s specification as a multi-cutter of Type N and its right-hand cutting orientation make it straightforward to integrate into conventional milling cycles. Together, these characteristics support predictable cycle times and lower overall tooling costs by combining reach, wear resistance and application flexibility. For machining tasks that demand reach and durability, contact Metav Werkzeuge to arrange procurement of the TECWERK extra-long TiAlN-coated solid carbide end mill (SKU 2000866879NW) and obtain tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000866879NW Manufacturer: TECWERK Product type: End mill Standard: DIN 6527 Facts Diameter: 10 mm Overall length: 80 mm Effective length: 35 mm Cutting length: 6 mm Flutes: 6 Helix angle: 35–38° Neck relief free ground: 9.7 mm Shank diameter: 10 mm Protection chamfer: 0.2 mm Shank tolerance: h6 Special features Material: VHM (solid carbide) Coating: TiAlN Right-hand cutting Extra-long version for deep applications 45° protection chamfer Unequal pitch for reduced vibration Halsfreischliff (neck relief) for access Cylindrical shank to DIN 6535 HB Universal geometry for roughing and finishing Suitable for steel, cast iron, Cr‑Ni steels and non-ferrous metals FAQ What materials can this end mill machine reliably? The TECWERK extra-long solid carbide end mill machines a wide range of materials reliably, including steel, cast iron, Cr‑Ni steels and various non‑ferrous metals such as aluminium alloys with silicon. Is the tool suitable for deep-pocket or slot milling? Yes; the extra-long design with an effective length of 35 mm and neck relief supports deep-pocket machining and slotting where extended reach is required. How does the TiAlN coating benefit performance? The TiAlN coating increases heat resistance and reduces abrasive wear, which helps the solid carbide cutter retain edge life at higher cutting speeds and under demanding conditions. What clamping requirements are recommended for safe use? A precise clamping system compatible with a 10 mm shank and h6 tolerance is recommended to ensure secure fixation and reproducible machining results with this cylindrical-shank end mill. Does the tool reduce chatter during heavy cutting? The unequal pitch geometry and neck relief are designed to reduce harmonics and vibration, improving stability and surface finish during heavy or interrupted cuts. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of a powder‑metal HSS‑Co core and ALCRONA coating for extended tool life and consistent chip control; the long, four‑flute geometry ensures stable milling in steels and stainless materials. Order the TECWERK end mill directly via Metav Werkzeuge or consult our specialists for application advice. End mill DIN 844 Type N, 10 mm – TECWERK (HSS‑Co PM, ALCRONA) The End mill DIN 844 Type N is a long, four‑flute milling cutter engineered for productive machining of steels and stainless steels with centre‑cutting capability for plunge and peripheral operations. HSS‑Co PM core with ALCRONA coating Long 4‑flute design for stable axial engagement Weldon flat on cylindrical shank for secure clamping Vibration reduction via uneven flute spacing High material capability for demanding steel work The tool is built around a powder‑metal HSS‑Co substrate that combines toughness with wear resistance; this makes it particularly suited to machining medium‑strength steels and stainless steel up to roughly 1000 N/mm². The ALCRONA coating reduces friction and improves tool life under repeated thermal and mechanical load, translating into fewer tool changes and higher machine uptime. The centre‑cutting ability permits safe plunging, while the long length supports reach into deeper features without immediate loss of stability. Geometry designed to reduce chatter and improve surface finish Unequal flute division and a tapered gullet bottom provide vibration reduction and enhanced chip evacuation, which stabilises the cut and helps achieve a consistent surface finish. The four‑flute layout balances feed per tooth and chip load for efficient material removal on peripheral passes. The combination of these features results in smoother cutting behaviour and predictable tool performance, an advantage when processing workpieces where repeatability is crucial. Secure mounting and reliable handling for workshop continuity A cylindrical shank with Weldon flat ensures solid clamping in standard holders, reducing the risk of slippage during heavy cuts. The right‑hand cutting direction and standard DIN 844 Type N geometry allow straightforward programming and tool change procedures in common milling centres. Together, the long overall length and effective cutting length make this cutter suitable for operations requiring deeper reach, while the improved tool stiffness contributes to dimensional stability across production runs. Practical benefits and operational considerations Operators will appreciate the clear material suitability: very good for steel and cast materials, very good for inox (stainless steel), and conditionally suitable for non‑ferrous metals and special alloys. The tool’s centre‑cutting design supports plunge operations, reducing the need for separate drills in many setups. For best results, match cutting parameters to material strength and machine rigidity; the coated surface allows competitive cutting speeds while maintaining edge life. Contact Metav Werkzeuge for tailored application advice and secure procurement of this TECWERK end mill — our specialists at Metav Werkzeuge will help select feeds and speeds for specific materials and machine setups Technical data Article number: 2000866045NW SKU: 2000866045NW Standard: DIN 844 Product type: End mill Manufacturer: TECWERK Facts Diameter: 10 mm Overall length: 95 mm Cutting length: 4 mm Effective length: 53 mm Shank diameter: 10 mm Number of flutes: 4 Special features Material: HSS‑Co PM Coating: ALCRONA Type: DIN 844 Type N Geometry: Long, 4‑flute, centre cutting Shank: Cylindrical with Weldon flat Cutting direction: Right‑hand cutting Application: Suitable for steels and inox up to ~1000 N/mm² Vibration reduction: Unequal flute spacing Improved stiffness: Tapered gullet bottom FAQ Is this cutter suitable for plunge milling into stainless steel? The End mill DIN 844 Type N from TECWERK is centre cutting and therefore suitable for plunge milling into stainless steel; refer to SKU 2000866045NW for exact dimensions. What materials does this tool handle best? The HSS‑Co PM substrate with ALCRONA coating makes the cutter very well suited for steel and cast materials, and very good for stainless steel; non‑ferrous and special alloys are conditionally suitable. How should the cutter be clamped? Use a secure holder with accommodation for the Weldon flat on the cylindrical shank to prevent slippage and ensure reliable torque transmission during heavy cuts. Can this tool reduce machining vibrations compared with standard end mills? Yes, the uneven flute spacing and tapered gullet design of this TECWERK tool help reduce vibrations and improve surface finish during high‑engagement milling. Is the 4 mm cutting length a limitation for deeper pockets? The 4 mm cutting length defines the effective radial/axial engagement; for deeper material removal, consider multiple passes or an alternative tool with a longer cutting length. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Optimise milling performance with a HSS‑Co PM body and ALCRONA coating for extended tool life plus a Weldon shank for secure clamping; order the TECWERK End mill DIN 844 Type HR, 10 mm directly via Metav Werkzeuge or ask our consultants if needed. TECWERK End mill DIN 844 Type HR, 10 mm — HSS‑Co PM, ALCRONA-coated, Weldon shank The TECWERK End mill DIN 844 Type HR, 10 mm is a long, 4‑flute, centre‑cutting milling cutter designed for high‑strength steels and stainless applications where rigidity and repeatable accuracy are required HSS‑Co PM core with ALCRONA coating 4‑flute, centre‑cutting geometry Weldon shank for secure clamping Long version with improved rigidity Proven material capability for demanding components Made from HSS‑Co PM, this cutter combines the toughness of cobalt‑alloyed, powdered high‑speed steel with an ALCRONA surface treatment to resist wear and thermal softening. The design permits machining of workpieces with tensile strengths up to ≈1400 N/mm², making the tool particularly suitable for hardened steels, stainless steel and cast materials. The coated surface reduces adhesion and builds up less cutting residue, which translates into longer cutting intervals and fewer unplanned tool changes. This technical combination supports consistent batch processing and tighter production tolerances for industrial and subcontracting environments. Geometry engineered for efficient, stable cutting A 4‑flute layout and centre‑cutting profile enable both peripheral milling and limited plunging without special tool preparation. The cutter’s conical flute root increases stiffness and improves chip formation, while the 45° protection chamfer on the cutting edge reduces chipping at entry. Right‑hand cutting direction and precise flute geometry support reliable chip evacuation and lower cutting forces, which helps maintain surface finish quality on tight‑tolerance parts. The result is a stable process window that benefits high‑feed operations as well as finishing passes where dimensional accuracy and surface integrity matter. Workshop integration and handling advantages The tool features a Weldon shank with drive flat on a 10 mm shaft for positive, slip‑free clamping in standard toolholders; the overall length of 95 mm with an effective working length of 53 mm suits setups that require reach without sacrificing stiffness. A relieved shank section (9.5 mm relief) simplifies tool change and prevents interference in confined fixtures. As a long version end mill, the cutter reduces the need for frequent tool swaps when machining deeper profiles, improving uptime and operator efficiency. Supplied under the TECWERK designation and held to DIN 844, the tool integrates easily into existing tooling inventories and maintenance schedules. For a tailored recommendation on integrating the TECWERK end mill into a production cell, contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data SKU: 2000866073NW Standard: DIN 844 Designation: End mill Type HR Brand: TECWERK Coating: ALCRONA Material: HSS‑Co PM Cutting direction: Right‑hand Centre‑cutting: Yes Core specifications Diameter: 10 mm Shank diameter: 10 mm Overall length: 95 mm Effective length: 53 mm Cutting length: 4 mm Relief length: 9.5 mm Number of flutes: 4 SKU/UID: 2000866073NW Special features Weldon shank with drive flat 45° protection chamfer Long version for extended reach Improved rigidity via conical flute root Suitable for steels up to ≈1400 N/mm² Very suitable for steel, stainless and cast Conditionally suitable for non‑ferrous and special alloys FAQ Which materials is this cutter best suited for? The TECWERK End mill DIN 844 Type HR, 10 mm is very suitable for steel, stainless steel and cast materials; non‑ferrous and special alloys are conditionally suitable according to the tool’s geometry and coating. Does the tool allow plunging operations? Yes — the centre‑cutting geometry permits limited plunging and helical entry, making the cutter versatile for pocketing and stepped features. What clamping interface is required? A Weldon‑style holder with a matching 10 mm clamping seat and set screw engagement is recommended for secure, slip‑free operation. How does the ALCRONA coating benefit production? The ALCRONA coating reduces adhesion and wear at elevated cutting temperatures, which extends tool life and supports consistent surface finish over longer runs. Is this cutter compliant with recognised standards? The tool is manufactured to DIN 844 specifications and carries the TECWERK designation for long, four‑flute cutters. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the TiAlN coating and solid carbide construction for extended tool life and thermal stability, combined with a vibration‑reduced long geometry for reliable roughing and finishing. Order the cutter directly via Metav Werkzeuge or request application advice from our consultants. TECWERK Solid Carbide End Mill DIN 6527 L, Ø10 mm, TiAlN‑coated The TECWERK Solid Carbide End Mill DIN 6527 L is a long, 4‑flute centre‑cut cutter designed for high‑performance roughing and finishing in steels, cast irons and non‑ferrous alloys TiAlN coating for high thermal resistance Solid carbide (VHM), fine‑grain construction 4‑flute geometry for efficient chip evacuation Universal use: steel, cast and non‑ferrous materials Reduced vibration and consistent material removal for deeper pockets The long version of this cutter combines a 4‑flute profile with an unequal helix and a dedicated neck relief, giving stable cutting behaviour in extended overhangs. These geometric choices reduce chatter and promote even chip formation, so material removal stays predictable even when reaching into deep pockets. The centre‑cut characteristic enables limited plunging, while the 45° protection chamfer and 0.2 mm chamfer detail protect the cutting edge during entry, supporting both roughing cycles and follow‑up finishing passes. Coating and substrate for longer life under high temperatures The combination of a VHM fine‑grain substrate and a TiAlN surface layer raises hot‑hardness and reduces adhesive wear during high‑speed operation. TiAlN forms a protective oxide at elevated temperatures, which helps against thermal softening in extended cuts and when machining heat‑generating alloys. The outcome is a tool that tolerates aggressive feeds and higher cutting speeds, translating into longer tool life and fewer tool changes on demanding production runs. Broad material compatibility to streamline tooling inventory The tool is specified for a wide range of workpiece materials, including steel, cast iron, Cr‑Ni steels, non‑ferrous metals and aluminium with silicon content, and also handles abrasive or special alloys well. Its suitability for HPC machining means one cutter can cover both roughing and finishing steps, reducing the need for multiple dedicated tools. This versatility simplifies stock management and supports faster process setup across mixed‑material jobs. Precision shank and standard conformity for easy integration Built with a cylindrical shank to DIN 6535 HB and a shank tolerance of h6, the cutter integrates cleanly with collet chucks and tool holders, ensuring concentricity and repeatable run‑out. Key dimensions include an overall length of 72 mm, an effective cutting length of 30 mm and a nominal diameter of 10 mm, which together enable reliable use in standard toolholders while preserving the necessary rigidity for high‑duty machining. Choose the TECWERK TiAlN‑coated solid carbide end mill when consistent high‑speed performance and material versatility are required; contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000866526NW Standard: DIN 6527 Manufacturer: TECWERK Product type: End mill (solid carbide) Coating: TiAlN Material: VHM Flutes: 4 Cutting direction: Right‑hand Core data Diameter: 10 mm Overall length: 72 mm Effective length: 30 mm Cutting length: 4 mm Shank diameter: 10 mm Chamfer protection: 0.2 mm Special features Centre‑cut 45° protection chamfer Unequal helix for vibration reduction Neck relief / long version for deep cuts Shank to DIN 6535 HB, tolerance h6 Suited for HPC, roughing and finishing Very good suitability for steel, cast iron, non‑ferrous metals and special alloys FAQ What materials can this cutter machine effectively? The TECWERK solid carbide end mill is specified for steel, cast iron, Cr‑Ni steels, non‑ferrous metals and aluminium with silicon content, offering very good suitability across these groups. Is the tool suitable for plunge cutting? Yes, the cutter features a centre‑cut geometry that allows limited plunging, making it suitable for operations that require short axial engagement. How does the TiAlN coating benefit production? The TiAlN coating increases thermal resistance and surface hardness at elevated temperatures, reducing wear during high‑speed and high‑feed operations and extending tool life. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of solid carbide construction, TiAlN coating and a compact, extra-short design for vibration‑reduced machining and consistent surface quality. Order the TECWERK end mill directly via Metav Werkzeuge or consult the team for application advice. TECWERK End Mill WN Type N – Ø10 mm, Solid Carbide, TiAlN, 4 Flutes, 35° Helix TECWERK End Mill WN Type N is an extra‑short, centre‑cut solid carbide end mill designed for high‑performance roughing and finishing across a wide range of metals *TiAlN-coated solid carbide for longevity and heat resistance *Extra-short, rigid design for low-vibration cutting *HPC geometry with unequal pitch for stable chip evacuation *Centre-cutting, right-hand 4-flute for versatile machining High-performance cutting tailored for industrial production The combination of solid carbide (VHM) and a TiAlN coating delivers a high thermal resistance and extended edge life under elevated cutting temperatures. The 35° helix paired with the HPC geometry and unequal pitch reduces cutting forces and optimises chip flow, which results in consistent surface finishes and predictable tool life during both roughing and finishing operations. This specification is particularly suited to machining tasks that require repeatable results in mixed production runs. Robust design for vibration‑reduced machining and precision grooves An extra-short, rigid construction with a cylindrical shank to DIN 6535 HB minimises overhang and supports stable toolholding in standard collets. The tool’s centre‑cutting capability and four flutes enable plunge cuts and short groove work, while the moderate 10° soft‑cut characteristic helps absorb chatter in less rigid setups. These features combine to lower the risk of premature tool failure and to maintain dimensional accuracy on workpieces such as steels up to 45 HRC and grey cast iron. Broad material suitability and explained benefits The cutter is optimised for a variety of materials: very good performance in steel and cast iron, and conditional suitability for stainless steel (INOX) and non‑ferrous alloys such as aluminium, copper and brass. The TiAlN layer forms a protective barrier that reduces adhesive wear and increases resistance to oxidation at high temperatures, making the tool appropriate for longer cycles and elevated cutting speeds. The fine‑grain carbide substrate enhances toughness and wear resistance, providing a cost‑effective balance between life and performance in series production. Contact Metav Werkzeuge for application guidance and dependable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss delivery times and technical suitability. Technical Data SKU: 2000866416NW Standard: DIN 6527 Label: Schaftfräser WN TypN D.10mm VHM TiAlN 35Grad HB Z.4 ext.kurz TECWERK Manufacturer: TECWERK Facts Diameter: 10 mm Overall length: 50 mm Cutting length: 4 mm Shank diameter: 10 mm Number of flutes: 4 Helix angle: 35° Protection chamfer: 0.2 mm Special features Material: solid carbide (fine‑grain VHM) Coating: TiAlN Type: N / HPC geometry, unequal pitch Cutting direction: right‑hand Centre cutting: yes Shank standard: cylindrical shank to DIN 6535 HB Short, stable design with soft cut (~10°) Suitable for: steel (very good), cast iron (very good), INOX (conditional), non‑ferrous metals (conditional) Application: high‑performance cutting (HPC), roughing, finishing, slotting FAQ What materials is this end mill best suited for? The TECWERK end mill with TiAlN coating and fine‑grain solid carbide substrate is rated very good for steel and cast iron, and conditionally suitable for stainless steel and various non‑ferrous metals. Can the cutter be used for plunge cutting and slotting? Yes, the centre‑cutting geometry and four‑flute configuration allow plunge operations and short slotting, while the extra‑short design reduces overhang‑related vibration. How does the TiAlN coating benefit production runs? The TiAlN coating increases thermal resistance and reduces adhesive wear, enabling longer tool life under higher cutting speeds and improving process stability across batch production. Is the shank compatible with standard toolholders? The tool features a cylindrical shank manufactured to DIN 6535 HB, which suits standard collet systems and ensures secure clamping for precision work. What distinguishes the HPC geometry in this tool? The HPC geometry, combined with unequal pitch, reduces harmonics and improves chip evacuation; this results in more stable cutting, improved surface quality and predictable tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a long, vibration‑reduced carbide cutter with a TiAlN surface for extended tool life and consistent finishes; its 6‑flute geometry and 35–38° helix deliver high material removal rates while maintaining dimensional accuracy. Order directly via Metav Werkzeuge or consult the technical team for application guidance. TECWERK Solid Carbide Long End Mill D10 mm — TiAlN, 6 flutes The TECWERK Solid Carbide End Mill D10 mm is a long, TiAlN‑coated, six‑flute cutter designed for vibration‑reduced roughing and finishing across steels, cast materials and non‑ferrous alloys Solid carbide construction with TiAlN coating Six flutes with 35–38° helix for high feed rates Cylindrical shank to DIN 6535 HB, tolerance h6 Long design with neck relief for low vibration High throughput and longer tool life for series milling The cutter combines solid carbide substrate with a TiAlN coating to withstand elevated cutting temperatures and abrasive conditions. The 6 flutes and a pronounced 35–38° helix enable increased feed per tooth and stable chip evacuation, which means higher productivity in both slotting and peripheral milling. The geometry is optimised to balance cutting forces and heat management, reducing tool wear and preserving edge integrity over longer cycle times. Stable clamping and concentricity for reliable tolerances A cylindrical shank to DIN 6535 HB with shank tolerance h6 ensures concentric clamping in holders and minimises runout-related shortening of tool life. The neck relief and unequal pitch reduce the tendency to chatter, delivering smoother surface finishes and consistent tolerances during interrupted cuts or deep passes. These features lower the risk of rework and support predictable process windows on production equipment. Universal material compatibility for fewer tool changes Thanks to its substrate and coating, the tool is suitable for a wide material spectrum: steels, cast iron, temper castings, Cr‑Ni alloys, non‑ferrous metals and aluminium with silicon content, as well as abrasive workpieces. The combination of a fine‑grain carbide body and TiAlN enables both roughing and finishing operations without frequent tool swaps. For users less familiar with coatings: TiAlN forms a hard, oxidation‑resistant layer that protects the cutting edge at high temperatures and improves overall wear resistance. Practical dimensions and handling for workshop integration With an overall length 72 mm, effective length 30 mm and cutting length 6 mm, the long configuration offers extended reach for deep or recessed features while keeping the active flute length appropriate for stable cutting. The tool includes a protective chamfer 0.2 mm (45°) and a relief measure listed as 9.7 mm, aiding in safe handling and initial engagement. The design supports vibration‑reduced machining, helping to maintain cycle consistency on CNC milling centres and reducing the need for excessive fixture rigidity. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 2000866938NW Standard: DIN 6527 Type: Solid carbide end mill, long Dimensions & Cutting Data Diameter: 10 mm Overall length: 72 mm Cutting length: 6 mm Effective length: 30 mm Shank diameter: 10 mm Flutes: 6 Helix angle: 35–38° Cutting direction: right‑hand cutting Shank tolerance: h6 Materials & Special Features Coating: TiAlN Material: solid carbide (VHM) Shank: cylindrical to DIN 6535 HB Pitch: unequal pitch for reduced vibration Neck relief present Protective chamfer: 0.2 mm, 45° Relief measure: 9.7 mm Suitable for: steel, cast iron, Cr‑Ni steels, non‑ferrous metals, aluminium with silicon, abrasive materials Application: vibration‑reduced machining, suitable for roughing and finishing FAQ What materials is the cutter suitable for? The TECWERK Solid Carbide End Mill D10 mm is suitable for steels, cast iron, temper castings, Cr‑Ni alloys, non‑ferrous metals and aluminium containing silicon, as well as abrasive materials. What advantages does the TiAlN coating provide? The TiAlN coating on this cutter increases heat resistance and wear protection, extending tool life during high‑temperature or abrasive milling operations. Which shank and tolerance standards apply? The tool features a cylindrical shank to DIN 6535 HB with h6 tolerance for precise clamping and reduced runout. Is the geometry suitable for finishing operations? Yes — the combination of six flutes, unequal pitch and the 35–38° helix enables both efficient material removal and fine surface finishes, making the tool appropriate for finishing as well as roughing. What is the SKU for ordering or reference? Reference SKU 2000866938NW for ordering and technical enquiries regarding this TECWERK end mill. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

High-performance, long-reach roughing capability combined with TiAlN-coated solid carbide construction delivers consistent, vibration‑reduced material removal for everyday shop demands; order the TECWERK long solid‑carbide roughing end mill directly via Metav Werkzeuge or consult the specialists for application advice. TECWERK long solid‑carbide roughing end mill Ø 10 mm — TiAlN, 4‑flute, DIN 6527L The TECWERK long solid‑carbide roughing end mill designed for heavy material removal in workshop and production environments, offering extended reach and a hardwearing TiAlN surface for sustained cutting performance. Solid carbide construction (VHM) TiAlN coating for high heat resistance 4‑flute roughing profile for fast removal 45° helix and neck relief for vibration control Faster, more consistent roughing for high productivity The long solid‑carbide configuration combines a VHM body with a TiAlN coating, producing a tool that sustains higher temperatures and resists abrasive wear. The specialised 4‑flute roughing profile and positive rake angle prioritise material displacement over finish, enabling higher material removal rates while the geometry reduces chatter for more consistent passes. This balance of hardness and thermal protection translates directly into longer life and fewer tool changes in batch operation. Broad material suitability for mixed production runs The tool’s geometry and coating make it well suited to a range of common workshop materials: steel, non‑ferrous metals and cast iron show very good machinability with this cutter, while stainless steel and special alloys are workable with adapted feeds and speeds. The combination of a sharp roughing profile and heat‑resistant surface treatment increases flexibility across mixed lots, reducing the need for multiple dedicated cutters and simplifying tool inventory. Secure clamping and long‑reach accuracy for reliable setups A cylindrical shank manufactured to DIN 6535 HB with h6 shank tolerance ensures concentric clamping and consistent runout control when mounted in collets or chucks. The long‑reach design with a defined effective cutting length of 30 mm and neck relief (≈ 9.7 mm) offers access to recessed features while limiting interference; this geometry supports steadier cuts and repeatable dimensonal results in successive components. Practical machining guidance to extend tool life Right‑hand cutting, a 45° helix and the roughing profile are engineered for robust stock removal under stable clamping and tuned feeds. The TiAlN coating supports elevated cutting temperatures, making it suitable for high‑speed applications with attention to appropriate cooling strategy and chip evacuation. Where finish is secondary and volume is primary, the tool reliably shortens cycle times while preserving edge integrity for multiple passes. For secure procurement and application support of this TECWERK long solid‑carbide roughing end mill with TiAlN coating, contact Metav Werkzeuge in Emmerich to discuss suitability for specific materials and setups. Technical Data Article number: 2000866117NW Label: Schaftfräser DIN 6527L Typ NR‑UNI D.10mm Einsatz‑L.30mm VHM TiAlN HB Z.4 lang TW Manufacturer: TECWERK Core data Diameter: 10 mm Overall length: 72 mm Effective cutting length: 30 mm Cutting length: 4 mm Shank diameter: 10 mm Number of flutes: 4 Special features Material: solid carbide (VHM) Coating: TiAlN Helix angle: 45° Shank to DIN 6535 HB Shank tolerance: h6 Neck relief: 9.7 mm Cutting direction: right‑hand Positive rake angle for increased application flexibility Special roughing cutter profile for vibration‑reduced machining 45° protective chamfer FAQ What applications is the TECWERK long solid‑carbide roughing end mill best suited for? The TECWERK long solid‑carbide roughing end mill (SKU 2000866117NW) is optimised for heavy stock removal in steel, non‑ferrous metals and cast iron, with conditional use in stainless steel and certain alloys when feeds and speeds are adjusted. Can this end mill be clamped safely in common collet systems? Yes — the cylindrical shank to DIN 6535 HB with h6 tolerance ensures secure, concentric clamping for reliable runout control in standard collet chucks. How does the TiAlN coating affect machining performance? The TiAlN coating increases heat resistance and wear protection on the TECWERK cutter, supporting higher thermal loads and longer edge life during demanding roughing operations. Is the long version suitable for deep pocketing or recessed features? The extended geometry and the specified effective cutting length of 30 mm make the tool appropriate for recessed features, while the neck relief reduces interfering contact for improved accessibility. What cutting strategy preserves tool life while maintaining removal rates? Use stable clamping, controlled feeds, and good chip evacuation; take advantage of the roughing profile and positive rake angle of the TECWERK cutter to keep passes efficient without overloading the cutting edge. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund