730mm Bi-Metal HSS M42 Variable Pitch Metal Cutting Bandsaw Blade 0.51mm, 10-14 TPI - TECWERK

Take advantage of the combination of HSS M42 bimetal construction, a variable tooth pitch 10–14 TPI, and a narrow 13 mm width to ensure durable, vibration-resistant cutting of profiles and pipes; order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for selection support.

TECWERK Metal bandsaw blade 730 x 13 x 0.51 mm — HSS M42, variable 10–14 TPI

The TECWERK Metal bandsaw blade 730 x 13 x 0.51 mm is a narrow, high-performance blade designed for precision sawing of profiles, tubes and solid sections in a workshop or production setting.

• HSS M42 bimetal construction for durability
• Variable tooth pitch 10–14 TPI for versatile cutting
• Width 13 mm, thickness 0.51 mm for precise cuts
• Suitable for profiles, pipes and stainless steel

Engineered for consistent cutting and long blade life

The Metal bandsaw blade 730 x 13 x 0.51 mm pairs HSS M42 hardness with a bimetal bond to deliver extended service life compared with standard high-speed steels. The hardened cutting edge resists bluntness under continuous load, while the flexible backing prevents premature breakage. This combination increases uptime in mixed batches and repetitive cuts, reducing the frequency of blade changes and contributing to steadier output in small to medium production runs. The narrow geometry also supports precision in confined cutting operations.

Versatile performance across common workshop materials

Built for adaptability, the blade’s variable tooth pitch and M42 chemistry make it suitable for a broad spectrum of materials. The HSS M42 cutting edge maintains performance on stainless steel, tool steels and many non-ferrous metals, while the bimetal construction enhances wear resistance when encountering tougher sections or interrupted cuts. For practical workflow, use the blade for both thin-walled and solid components where consistent kerf width and predictable tool life are priorities, ensuring fewer reworks and better overall process reliability.

Clear tooth-pitch guidance for the right cutting action

The blade offers a 10–14 TPI banding that is part of a wider recommendation range for TECWERK bandsaw applications. Coarser and mixed pitches (for example 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle) reduce vibration and are well suited to profiles and pipes with small to medium wall thicknesses. Finer, positively raked configurations (such as 3/4 and 4/6 with positive rake) provide high cutting performance for thicker, solid materials and demanding alloys. In practice, the tooth specification balances chip clearance, feed stability and surface finish to match the intended workpiece.

Practical benefits for setup and daily shop use

The blade’s dimensions — 13 mm width and 0.51 mm thickness — make it a practical choice for machines tuned for narrow-kerf sawing and for operations where reduced material loss and precise edge geometry matter. The durability of the bimetal edge reduces downtime due to blade failures, while the variable pitch improves cut smoothness in heterogeneous batches. For workshops handling medium-mix, medium-volume tasks, this blade supports consistent cycle times and predictable maintenance intervals, aiding scheduling and cost control.

Contact Metav Werkzeuge for tailored guidance on selecting the right TECWERK HSS M42 bimetal bandsaw blade for specific applications; technical support is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical data

• Article number: 2000814015NW
• Manufacturer: TECWERK
• Product type: Metal bandsaw blade
• Label: Metallsägeband 730x13x0,51mm HSS M42 ZpZ 10-14 TECWERK

Facts

• Length: 730 mm
• Width: 13 mm
• Thickness: 0.51 mm
• Teeth per inch: 10–14 TPI
• Tooth pitch type: variable tooth pitch
• Packaging unit: 5

Special features

• Material: HSS M42 bimetal
• Recommended for profiles and pipes
• Suitable for stainless steel and tool steels
• 0° rake angle recommendations for vibration-prone sawing
• Positive rake options for high cutting performance

FAQ

What materials can this blade cut effectively?
The TECWERK metal bandsaw blade is designed for a wide range of materials; its HSS M42 bimetal edge performs well on stainless steel, tool steels and many non-ferrous metals, and it is suitable for cutting profiles and pipes.

What does a variable tooth pitch mean for cutting quality?
Variable tooth pitch reduces resonance and chatter during sawing; the 10–14 TPI range helps to balance chip removal and finish when working with mixed-section batches and vibration-sensitive cuts.

Which tooth configuration is recommended for thin-walled pipes?
For thin-walled and vibration-prone operations, use coarser or mixed pitches with a 0° rake angle as recommended for profile and tube cutting; this improves stability and prolongs blade life.

Is this blade suitable for solid bar cutting?
Yes; selecting a finer, positively raked pitch increases cutting aggressiveness and is advised for solid materials and thicker profiles to maintain material removal rates.

How should the blade be used to maximise lifetime?
Sharp, correctly tensioned installation, matched feed rates and using the appropriate tooth pitch for the workpiece all extend service life; regular inspection and correct machine alignment reduce wear on the HSS M42 cutting edge.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund