Combining HSS M42 bimetal durability with a variable 14–18 TPI tooth pitch, this bandsaw blade delivers long service life and adaptable cutting across steels and non‑ferrous alloys. Order the blade directly via Metav Werkzeuge or consult our specialists for material‑specific recommendations. TECWERK Metal Bandsaw Blade 1140 x 13 x 0.65 mm, HSS M42, 14–18 TPI (variable pitch) A TECWERK Metal Bandsaw Blade 1140 x 13 x 0.65 mm engineered for versatile cutting of profiles, tubes and solid materials in workshop and light industrial environments HSS M42 bimetal for high wear resistance Variable tooth pitch 14–18 TPI for diverse materials 1140 x 13 x 0.65 mm for small to medium profiles Suited to vibration-prone cuts and tube/profile work Durable performance through bimetal construction The HSS M42 composition combines a hard cutting edge with a flexible backing, giving a bimetal blade that resists wear far longer than simple high‑speed steel options. This structure means fewer blade changes and lower process interruptions, which improves productivity in busy shops. The welded tooth edge keeps cutting geometry stable under load, translating to longer blade life and predictable replacement intervals even when machining tougher steels. Adaptive tooth geometry for reliable, low‑vibration cutting A variable tooth pitch spreads cutting forces and improves chip removal, which reduces vibration and chatter during sawing. The 14–18 TPI range is intended for mixed‑material work, offering a balance between cutting speed and finish. Specific pitch groups within this range perform best with a neutral rake: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle are excellent for vibration‑sensitive operations, while finer pitches with a positive rake boost removal rates on solid sections and tougher alloys. Right size for workshop applications and diverse materials At 1140 x 13 x 0.65 mm, the blade is dimensioned for small to medium bandsaw frames and is well suited to cutting profiles and tubes as well as solid sections. The blade’s construction and tooth geometry make it a good choice for stainless and tool steels, as well as non‑ferrous metals and general engineering steels. For operations requiring a blend of durability and flexibility — profile and tube cutting, smaller‑wall sections or mixed batches — this blade provides a dependable compromise between lifespan and cutting performance. Practical benefits and supplier confidence Selecting a robust HSS M42 bandsaw blade reduces downtime and handling costs, while the variable pitch eases set‑up choices across materials. Metav’s distribution centre in Emmerich acts as a quality filter for the European market, ensuring reliable supply and backed‑by‑experience service. If clarity is needed on pitch selection or machine compatibility, Metav’s consultants are available to advise on the most efficient configuration for a given material and saw. Speak with Metav Werkzeuge to choose the correct TECWERK HSS M42 metal bandsaw blade for the intended material and application — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814024NW Label: Metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 14–18 TPI TECWERK Product type: Metal bandsaw blade Manufacturer: TECWERK Facts Length: 1140 mm Width: 13 mm Thickness: 0.65 mm Teeth per inch: 14–18 Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable Recommended use for profiles, tubes and solid material 0° rake angle for vibration‑prone cutting ranges Suitable for steels, tool steel, stainless steel and non‑ferrous metals Designed for profile and tube cuts of small to medium wall thickness FAQ What materials can this bandsaw blade cut? The TECWERK metal bandsaw blade (SKU 2000814024NW) is suitable for steels, tool steels, stainless steel and non‑ferrous metals, including profile and tube work. Which tooth pitch should be chosen for vibration‑sensitive cuts? For vibration‑prone sawing, the 14–18 TPI range with a 0° rake angle on the TECWERK HSS M42 blade is recommended for smoother, more stable cutting. Is this blade compatible with small workshop bandsaws? Yes, the 1140 x 13 x 0.65 mm dimensions are intended for small to medium frame bandsaws commonly used in workshops. How does the HSS M42 bimetal construction benefit cutting life? The HSS M42 bimetal construction provides a hard, wear‑resistant cutting edge bonded to a tougher backing, extending blade life and maintaining cutting geometry under load. How is the variable pitch useful for mixed batches? A variable tooth pitch reduces harmonic vibration and improves chip clearance, making the TECWERK blade versatile across mixed materials and section sizes. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a wear‑resistant HSS M42 bimetal construction and a variable tooth pitch to handle a wide range of steels and non‑ferrous materials with fewer blade changes; order the blade directly via Metav Werkzeuge or consult Metav's technical advisors for application-specific recommendations. TECWERK metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10–14 – HSS M42 bimetal blade with variable pitch for profile and tube cutting A TECWERK metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10–14 designed for precise profile, tube and solid material sawing, offering variable tooth pitch to reduce vibration and extend blade life Wear‑resistant HSS M42 bimetal construction Variable tooth pitch 10–14 TPI for mixed materials 13 mm width with 0.65 mm thickness for narrow kerf Suited for vibration‑prone profile and tube cutting Long‑lasting cutting performance from high‑speed steel construction The combination of HSS M42 cutting edges fused to a flexible backing creates a bimetal structure that resists wear and retains edge geometry under demanding conditions. This metallurgy increases lifetime compared with conventional blades and reduces the frequency of blade changes, which saves machine downtime and tooling costs. The construction is particularly beneficial where consistent feed and finish quality are required across batches of construction steel, stainless steel, and tool steels, ensuring consistent cutting performance over extended runs. Stability and reduced vibration through variable tooth geometry The variable tooth pitch design—including recommended pairs such as 5/8, 6/10, 8/12, 10/14 and 14/18—breaks up harmonic resonances for smoother sawing in thin‑walled profiles and tubes. Pitches advised with a 0° rake angle deliver stable cutting for vibration‑prone operations, while coarser options such as 3/4 and 4/6 with a positive rake angle prioritise high material removal rates for solid sections and tougher alloys. This tailored tooth geometry translates technical choices into practical advantages: fewer chatter marks, improved surface finish and more predictable blade behaviour on small and medium wall thicknesses. Precision dimensions for delicate profiles and efficient material use With overall dimensions of 1140 mm length, 13 mm width and 0.65 mm thickness, the blade offers a narrow kerf that reduces material loss and heat input while enabling tight contouring in profile and tube work. The modest width helps to maintain precise corner radii and trims on thin‑walled components, and the thin body reduces cutting forces, which in turn lowers stress on the saw and workpiece. These characteristics make the blade suitable for a wide range of workshop tasks where space, finish and repeatability matter. Practical versatility for varied workshop demands Built for universal application in construction, tool and stainless steel machining as well as in non‑ferrous and high‑performance alloys, the blade supports efficient workflows across mixed production. Fewer tool swaps and a broad set of recommended tooth pitches make it a versatile inventory item for maintenance departments and job‑shops alike. For tailored cutting strategies or material‑specific pitch selection, Metav's product information and application notes provide guidance to integrate the blade into existing processes with confidence, helping to balance cutting speed, finish and blade life. For reliable workshop performance with TECWERK HSS M42 blades, contact Metav Werkzeuge for stock details and application advice — Metav Werkzeuge is based in Emmerich and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814023NW Brand: TECWERK Product type: Metal bandsaw blade Material: HSS M42 bimetal Dimensions: 1140 x 13 x 0.65 mm Facts Tooth pitch: 10–14 TPI variable Width: 13 mm Thickness: 0.65 mm Overall length: 1140 mm Packaging unit: 5 Special features Variable tooth pitch for reduced vibration Recommended pitches for profile and tube cutting Options with 0° rake angle for stable cutting Positive rake variants for high material removal Suited for stainless steel, tool steel and non‑ferrous metals FAQ What materials can this blade cut effectively? The TECWERK metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10–14 is suitable for construction steel, stainless steel, tool steels and various non‑ferrous materials as described in the product specification. Which tooth pitch is best for thin‑walled tube cutting? Pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle are recommended for vibration‑prone profile and tube cuts, providing greater stability and improved surface finish. How does the HSS M42 bimetal construction benefit workshop use? HSS M42 bimetal offers wear resistance and long edge life, which reduces blade changes and downtime, delivering consistent cutting results across batch operations. Is the blade suitable for solid material and thicker profiles? Yes — coarser toothings and positive rake configurations are specified for high cutting performance on solid materials and thicker profiles, making the blade versatile. What is the SKU for ordering and specification reference? The blade is listed under SKU/Article number 2000814023NW for procurement and inventory purposes. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS M42 bimetal construction and variable tooth pitch to achieve long blade life and flexible cutting performance across steels and non‑ferrous metals. Order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for tailored application advice. TECWERK Metal Bandsaw Blade 1140 x 13 x 0.51 mm — HSS M42, variable 14–18 tpi The TECWERK Metal Bandsaw Blade 1140 x 13 x 0.51 mm is a wear‑resistant HSS M42 bimetal blade engineered for versatile metal cutting tasks such as profile, tube and plate work. HSS M42 bimetal construction for long life Variable tooth pitch 14–18 tpi for versatility 13 mm width, 0.51 mm thickness for precise cuts Suited for steels, non‑ferrous metals and profiles Consistent performance across mixed materials The HSS M42 bimetal composition combines a hardened tooth edge with a flexible backing strip, delivering both wear resistance and fracture toughness. This material pairing reduces the risk of premature tooth failure and maintains cutting quality over extended runs, which is especially valuable in mixed‑material production environments. The construction supports steady feed rates and helps to keep cycle times predictable, making the blade a reliable choice for workshops seeking to balance longevity with consistent results. Reduced vibration and cleaner profile cuts A variable tooth pitch offers a direct benefit when sawing slender profiles or performing tube cuts prone to vibration. The alternating spacing of the teeth disperses harmonic frequencies, resulting in reduced vibration and a cleaner kerf. The 14–18 tpi range is particularly effective for thin‑walled profiles and moderate‑thickness tubing when used with a 0° rake setting, helping to prevent chatter and produce more accurate sections without compromising blade stability. High cutting performance where it is needed For demanding materials such as tool steels or when higher removal rates are required, the blade’s available smaller pitch options with a positive rake increase cutting aggressiveness and material evacuation. This configuration yields high cutting performance and shorter cycle times on tougher workpieces while still maintaining reasonable surface finish. Understanding rake angles and matching tooth pitch to the workpiece hardness enables improved throughput with fewer passes, and therefore a higher overall machine utilisation. Selecting and maintaining the blade for long life Correct tooth pitch selection and basic maintenance extend blade life significantly. Use coarser pitches for thicker sections and solid materials, and finer pitches for thin sheets and non‑ferrous metals. Maintain proper blade tension, keep guides aligned and ensure adequate coolant application for abrasive or stainless materials. The TECWERK metal bandsaw blade benefits from controlled feed rates and stable mounting; these practices reduce heat build‑up and tooth wear, preserving cutting performance and reducing replacement frequency. For projects demanding durable, flexible blade performance, contact Metav Werkzeuge for tailored guidance on TECWERK HSS M42 bandsaw blades and to arrange supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814022NW Type: Metal bandsaw blade Manufacturer: TECWERK Facts Length: 1,140 mm Width: 13 mm Thickness: 0.51 mm Teeth per inch: 14–18 tpi Pack size: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable Recommended cuts: profiles, tubes, solid material Recommended materials: steel, tool steel, stainless steel, non‑ferrous metals FAQ What materials can this bandsaw blade cut? The TECWERK metal bandsaw blade in HSS M42 quality is suitable for steels, tool steels, stainless steels and non‑ferrous metals as well as profiles and solid material. Which tooth pitch is recommended for vibration‑prone profile cuts? For vibration‑prone profile and tube cuts, the variable 14–18 tpi configuration with a 0° rake is recommended for the TECWERK bandsaw blade to reduce chatter and improve surface quality. Can the blade handle high removal rates on hard materials? Yes; the blade’s finer pitch options with a positive rake are designed to increase removal rates and deliver high cutting performance on harder steels while maintaining tool integrity. How should the blade be maintained to prolong its service life? Maintain correct tension, keep guides aligned, apply suitable coolant and match tooth pitch to material; these measures help the TECWERK HSS M42 bandsaw blade sustain cutting performance and extend blade life. Is this blade compatible with standard industrial bandsaws? The blade fits standard bandsaw machines that accommodate a 1,140 mm blade length and 13 mm width; correct tensioning and guide setup are essential for optimal performance with the TECWERK blade. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of HSS M42 bimetal construction, variable 10–14 TPI tooth pitch and robust 1140 x 13 x 0.51 mm dimensions for reliable, versatile sawing performance; order the blade directly via Metav Werkzeuge or consult our experts for application advice. TECWERK metal band saw blade 1140 x 13 x 0.51 mm HSS M42 (10–14 TPI) A TECWERK metal band saw blade 1140 x 13 x 0.51 mm HSS M42 (10–14 TPI) optimised for vibration-prone sawing of profiles, tubes and a wide range of steels with a wear-resistant bimetal edge. HSS M42 bimetal construction Variable tooth pitch 10–14 TPI 1140 x 13 x 0.51 mm dimensions Suited for vibration-prone cuts Durable bimetal edge for longer service life The HSS M42 bimetal composition combines a high-speed steel cutting edge with a flexible backing, offering a marked improvement in wear resistance and edge retention under heavy use. This construction reduces the need for frequent blade changes and supports continuous production runs in industrial workshops. The result is lower downtime and improved process stability when cutting demanding materials. Variable tooth pitch that stabilises cutting The variable tooth pitch design smooths chip load and reduces harmonic vibration during sawing, which is particularly beneficial for unstable or thin-walled workpieces. The delivered pitch of 10–14 TPI with a 0° rake is well suited to vibration-prone operations such as profile and pipe cuts of small to medium wall thickness. This arrangement helps maintain a steady feed rate and consistent surface quality on challenging geometries. Precise dimensions for predictable fit and performance With exact dimensions of 1140 x 13 x 0.51 mm, the blade provides a precise fit for compatible band saw frames while balancing stiffness and kerf efficiency. The 13 mm width aids tracking in guides, and the 0.51 mm thickness contributes to reduced material loss without compromising stability. These measurable values support planning for consumable inventory and machine setup in production environments. Broad material suitability for workshop versatility Designed as a universal solution, the blade addresses a spectrum of materials including construction steels, tool steels and stainless steels, as well as non-ferrous metals and solid sections. The construction and tooth geometry also perform well on full material and stronger profiles. For operations requiring higher cutting aggressiveness, other pitch and rake combinations are available, but the delivered configuration offers a reliable compromise between cutting life and cut quality. Order the TECWERK HSS M42 metal band saw blade via Metav Werkzeuge for dependable stock and expert application guidance — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical Data Article number: 2000814021NW Product name: Metal band saw blade 1140 x 13 x 0.51 mm HSS M42 10–14 TPI Manufacturer: TECWERK Facts Length: 1140 mm Width: 13 mm Thickness: 0.51 mm Tooth pitch: 10–14 TPI Pack quantity: 5 Special features Material: HSS M42 bimetal Variable tooth pitch Suitable for profiles and tubes with small to medium wall thickness 0° rake recommended for vibration-prone sawing Recommended for construction, tool and stainless steels, and non-ferrous metals FAQ What materials can this blade cut effectively? The TECWERK metal band saw blade in HSS M42 is suitable for construction steels, tool steels, stainless steels and many non-ferrous metals, plus full sections and stronger profiles. Is this blade suitable for tube and profile cutting? Yes, the variable pitch 10–14 TPI and 0° rake make the blade well suited to profile and tube cuts with small to medium wall thickness, especially where vibration is a concern. How does the 10–14 TPI affect cutting performance? The 10–14 TPI range balances chip evacuation and tooth engagement, providing stable cutting in varied materials while helping to reduce vibration and improve surface finish. What is the pack size and article number for ordering? The blade is supplied in packs of 5 and is listed under article number 2000814021NW for order processing. Can this blade be used for high-production runs? The HSS M42 bimetal construction is designed for extended life and reliable performance in production environments, making it suitable for sustained sawing tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from robust cutting performance and long service life thanks to HSS M42 construction and precise 1140 x 13 x 0.65 mm dimensions. Compatible with SQ-V10 band saws, this blade combines reliable metal‑cutting geometry with OPTISAW quality—order directly via Metav Werkzeuge or consult the technical team for fitment advice. Metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10-14 (OPTISAW) The metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10-14 (OPTISAW) is a workshop-grade saw band designed for consistent metal cutting on compatible SQ-V10 band saws 1140 x 13 x 0.65 mm blade dimensions HSS M42 high-speed steel Compatible with SQ-V10 band saws OPTISAW quality for metal cutting Long life and consistent cutting performance for industrial use Constructed from HSS M42, the blade offers elevated heat resistance and wear tolerance compared with standard high‑speed steels, which translates into fewer blade changes and steadier cutting performance under continuous use. The high-speed steel chemistry, optimised for sawing metal, maintains edge stability at higher cutting temperatures; this reduces frequent re-tensioning and keeps production throughput steady. The ZpZ 10-14 marking describes the blade's tooth specification and cutting geometry, providing a balance between material removal rate and surface finish suitable for general metal‑cutting tasks. Accurate fit and stable running to reduce vibration and scrap The precise 1140 x 13 x 0.65 mm format gives a predictable kerf and rigidity for narrow‑blade sawing, where stiffness minimises lateral flex and vibration. Blade width and thickness directly influence tracking and heat build-up: the 13 mm width supports good lateral stability, while the 0.65 mm thickness helps reduce material waste. Compatibility with SQ‑V10 saw frames simplifies procurement and replacement planning, ensuring the workpiece is cut cleanly and reducing rework rates in the workshop environment. Practical workshop advantages and handling information Supplied as a single unit, the saw band is ready for straightforward replacement during planned maintenance windows. The OPTISAW designation indicates a production focus on metal sawing applications, so the blade is appropriate for steel and common ferrous materials handled in general fabrication and maintenance shops. For less experienced users, the blade’s specification means easier selection: match the 1140 x 13 x 0.65 mm size and ZpZ 10-14 tooth layout to the machine and material to achieve predictable cutting results. For specialised alloys or unusual applications, the Metav technical team can advise on suitability and alternative geometries. Contact Metav Werkzeuge for tailored advice on OPTISAW bands and SQ‑V10 compatibility; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss workshop requirements and availability Technical data Article number: 4000894304NW Name: Metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10-14 OPTISAW Manufacturer: Optimum Maschinen Germany GmbH Packaging unit: 1 Core data Length: 1,140 mm Width: 13 mm Thickness: 0.65 mm Tooth specification: ZpZ 10-14 Special features HSS M42 high-speed steel OPTISAW brand For metal cutting Compatible with SQ-V10 FAQ What materials is this bandsaw blade suitable for? The bandsaw blade labelled Metal bandsaw blade 1140 x 13 x 0.65 mm HSS M42 ZpZ 10-14 (OPTISAW) is intended for general metal cutting; the HSS M42 composition performs well on common ferrous materials. Will this blade fit an SQ‑V10 band saw? Yes, the product is specified as compatible with SQ‑V10 saws and is dimensioned to match the required blade length and width for that frame. How does HSS M42 compare with other steels for saw blades? HSS M42 contains cobalt for improved hot hardness and wear resistance, which helps the blade retain cutting performance under higher temperatures and in demanding production use. Is the tooth specification ZpZ 10-14 suitable for finishing cuts? The ZpZ 10-14 tooth specification provides a balance between cut speed and finish; for finer surface quality, consider a blade with a denser tooth pitch, while this specification is well suited for general purpose metal sawing. What is the article number for ordering spare blades? The article number for ordering is 4000894304NW; reference this SKU when enquiring with Metav Werkzeuge or resellers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of durable HSS M42 bimetal construction and a variable pitch 6–10 TPI for reliable, versatile cutting across a range of steels and non‑ferrous metals; the 13 mm width and 0.65 mm thickness support precise profile and tube work while reducing vibration. Order the metal bandsaw blade directly via Metav Werkzeuge or ask our consultants if needed. Metal bandsaw blade 1335 x 13 x 0.65 mm HSS M42 – Variable pitch 6–10 TPI (TECWERK) The metal bandsaw blade 1335 x 13 x 0.65 mm HSS M42 is a wear‑resistant, versatile cutting tool designed for profile, tube and solid material sawing in workshops and light industrial environments Bimetal HSS M42 construction Variable pitch 6–10 TPI 13 mm width, 0.65 mm thickness Suited to profile and tube cuts Durable construction for consistent productivity The combination of bimetal HSS M42 steel and precision manufacturing delivers a blade that maintains edge geometry under demanding conditions. This composition provides significantly improved wear resistance compared with standard high‑speed steels, which translates into longer service life and fewer blade changes during production. The robust design supports steady material removal rates, making the blade a cost‑effective choice for repetitive cutting tasks and mixed production runs. Variable pitch for adaptable performance A variable pitch 6–10 TPI tooth layout optimises chip evacuation and reduces the tendency to chatter when cutting materials of varying quality. The alternating tooth spacing enables effective cutting of both solid sections and profiles by balancing cutting aggression and finish. In practice, this means cleaner cuts on construction and stainless steels as well as improved handling of non‑ferrous metals and mixed batches, without the need to change tooling frequently. Geometry and dimensions tuned for profile and tube work With a 13 mm width and 0.65 mm thickness over a 1335 mm total length, the blade is dimensioned for accurate tracking and low deflection in small to medium wall‑thickness profiles and tubes. The narrow cross section reduces heat build‑up and material distortion during long cuts, which benefits both dimensional accuracy and surface finish. The blade’s geometry is particularly effective for vibration‑sensitive applications where stability and repeatable results matter. Practical cutting recommendations and versatility The blade is optimised for a range of toothings and rake geometries: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake angle work well for vibration‑prone cuts and for profile and tube sections of small to medium wall thickness. Coarser pitches with a positive rake (for example 3/4 and 4/6) increase material removal for tougher jobs and thicker sections. This flexibility makes the blade suitable for construction steel, tool and stainless steels, non‑ferrous metals and solid stock, offering a practical solution for varied workshop requirements. For procurement or technical guidance on using the TECWERK HSS M42 bandsaw blade, contact Metav Werkzeuge for tailored advice and supply assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000813999NW Product type: Metal bandsaw blade Material: HSS M42 bimetal Facts Length: 1335 mm Width: 13 mm Thickness: 0.65 mm Tooth pitch: 6–10 TPI Special features Variable tooth pitch Suitable for profile and tube cuts Recommended for construction, tool and stainless steels Effective for non‑ferrous metals and solid material Low vibration performance for improved cut quality FAQ What materials can be cut with this bandsaw blade? The metal bandsaw blade 1335 x 13 x 0.65 mm HSS M42 is suitable for construction, tool and stainless steels, non‑ferrous metals and solid stock, as well as profile and tube sections of small to medium wall thickness. Is the blade suitable for vibration‑prone cutting tasks? Yes, the variable pitch design of this TECWERK bandsaw blade reduces chatter and is specifically recommended for vibration‑prone sawing operations. Which tooth pitch should be selected for general workshop use? The provided 6–10 TPI variable pitch offers a good balance for mixed workshop tasks; coarser or finer pitches can be chosen depending on material thickness and desired removal rate. Can the blade handle thicker profiles and solid sections? For thicker profiles and high removal, pitches with a positive rake are advised; the TECWERK HSS M42 blades are versatile enough to serve across a range of section sizes. Does the blade offer long service life for production use? The HSS M42 bimetal construction is designed for enhanced wear resistance and longer life under industrial and workshop conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a combination of HSS M42 bimetal construction, variable tooth pitch and workshop‑friendly dimensions for reliable cuts across mixed materials; order the TECWERK blade directly via Metav Werkzeuge or consult Metav’s technical team for application guidance. TECWERK metal band saw blade 1335 × 13 × 0.65 mm, HSS M42, variable 8–12 TPI The TECWERK metal band saw blade 1335 × 13 × 0.65 mm is a robust HSS M42 bimetal blade with a variable tooth pitch designed for versatile sawing tasks in workshops and production environments. HSS M42 bimetal construction for long life Variable tooth pitch 8–12 TPI for mixed materials 1335×13×0.65 mm for standard workshop saw frames Suited to stainless, tool steel and non‑ferrous metals Precise durability for continuous cutting operations Built from HSS M42 in a bimetal design, the blade combines wear resistance with a resilient backing steel to extend service life under repetitive use. The specified 1335×13×0.65 mm profile fits many common band saw frames found in metalworking shops and small production lines, delivering a balance of rigidity and flexibility. This construction reduces the frequency of blade changes, supporting steady throughput and lower downtime. The material choice also improves heat resistance and edge retention during prolonged cutting cycles. Variable tooth pitch for adaptable cutting performance The variable tooth pitch concept provides a smoother cut and improved chip evacuation when working across different cross sections. With the delivery specification focused on 8–12 TPI, the blade is optimised for mixed materials and medium‑wall sections; the manufacturer further recommends alternate pitches (5/8, 6/10, 8/12, 10/14, 14/18 with 0° rake) for vibration‑sensitive applications and profile/tube cutting. For high metal removal on solid sections or harder alloys, pitches with a positive rake are advised to boost cutting efficiency and reduce cycle times. Application range and material compatibility This band saw blade is designed for general‑purpose metal cutting including construction steel, tool steel, stainless steel and a variety of non‑ferrous metals. The blade performs well on full material bars and on profiles of small to medium wall thickness, making it suitable for workshops handling fabrication, repair, and component preparation. The combination of variable tooth geometry and HSS M42 hardness means the blade preserves cutting edge integrity when switching between materials of differing quality. Workshop integration and handling benefits The 13 mm width and 0.65 mm thickness provide compatibility with standard workshop blades and allow for easier tracking and tensioning in conventional band saw machines. The bimetal design also assists in resisting premature tooth failure when encountering intermittent impact or harder inclusions in the workpiece. This makes the blade a practical choice for environments where a single blade must tackle a range of tasks without frequent replacements, supporting predictable production planning and inventory control. Contact Metav Werkzeuge for supply details and tailored tooth‑pitch recommendations for TECWERK blades; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss compatibility with specific saw frames and materials Technical data Article number: 2000814000NW Label: Metallsägeband 1335x13x0,65mm HSS M42 ZpZ 8-12 TECWERK SKU: 2000814000NW Manufacturer: TECWERK Product type: Metal band saw blade Core data Width: 13 mm Thickness: 0.65 mm Total length: 1335 mm Tooth pitch: 8–12 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Variable tooth pitch for mixed‑material cuts Recommended toothings and rake options for vibration‑prone and high‑removal tasks Suitable for profile and tube cuts, full material and medium wall thickness sections FAQ Which materials can be cut with this blade? The TECWERK metal band saw blade is suitable for stainless steel, tool steel, construction steels and a range of non‑ferrous metals, as described in the technical features. What does the 8–12 TPI specification mean for cutting? An 8–12 TPI range offers a compromise between chip clearance and tooth engagement, making the blade well suited to mixed‑material jobs and medium‑section cuts. Are there recommended tooth pitches for tube and profile cutting? Yes, recommended toothings include 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake for vibration‑sensitive profile and tube work. How many blades are supplied per pack? The product is supplied in a packaging unit of 5. Is this blade compatible with standard workshop band saw frames? The 1335×13×0.65 mm dimensions match many common workshop frames; Metav Werkzeuge can confirm specific frame compatibility and tension requirements. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a wear‑resistant HSS M42 bimetal construction combined with a variable tooth pitch for reliable, versatile cutting across a wide range of steels and non‑ferrous materials. Order the blade directly via Metav Werkzeuge or consult the Metav team for application advice. Metal band saw blade 1335 x 13 x 0.65 mm HSS M42, variable pitch 10–14 (TECWERK) Metal band saw blade 1335 x 13 x 0.65 mm HSS M42 for metalworking applications, offering a wear‑resistant bimetal edge and a variable tooth pitch suitable for profile, tube and vibration‑sensitive cuts HSS M42 bimetal for high wear resistance Variable tooth pitch 10–14 TPI for mixed materials 1335 x 13 x 0.65 mm band for standard sawing machines Suited to vibration‑prone profile and tube cuts Durable cutting performance for continuous use The HSS M42 bimetal construction combines a hardened tooth edge with a flexible backing, delivering high wear resistance and a long service life under industrial conditions. This specification reduces frequent blade changes and contributes to consistent kerf quality in serial production. The material choice is optimised for metalworking environments where repeatability and blade life are decisive factors for productivity and cost efficiency. Variable tooth pitch for adaptable machining The variable pitch geometry—expressed here as 10–14 TPI—smooths cutting forces and minimises harmonic vibration during mixed‑geometry cuts. Such tooth spacing is particularly effective when processing a mix of profiles, tubes and solid sections, because it prevents regular tooth impact frequencies that cause chatter. In practice, this means more stable feeds, improved surface finish and fewer rejected parts when machining assemblies with varying cross‑sections. Clear guidance on pitch selection and cutting angles Different pitch groupings in this series are recommended for specific tasks: grouped pitches like 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake are excellent for vibration‑prone sawing and for cutting thin‑ to medium‑walled profiles and tubes, as well as construction, tool and stainless steels. Groupings such as 3/4 and 4/6 with a positive rake are tuned for high cutting performance, suitable for normal steels, tool steels, high‑speed steels and non‑ferrous metals, including thicker profiles and solid sections. These recommendations support decision‑making on blade selection for varying production scenarios. Integration into workshop workflows and machine compatibility With overall dimensions of 1335 x 13 x 0.65 mm, the band fits many common metal‑cutting band saws used in fabrication and maintenance shops. The combination of bimetal teeth and variable spacing reduces downtime through fewer blade replacements and smoother cuts, supporting leaner workflows. For operators, the result is increased throughput and predictable maintenance intervals, helping to coordinate production planning and spare‑part stocking more effectively. For industrial metal cutting where longevity and adaptability matter, select the TECWERK HSS M42 bimetal band saw blade and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: 2000814001NW Product type: Metal band saw blade Brand: TECWERK Material: HSS M42 bimetal Dimensions: 1335 x 13 x 0.65 mm Teeth per inch: 10–14 TPI Tooth geometry: Variable pitch Facts Overall length: 1335 mm Width: 13 mm Thickness: 0.65 mm Special features Particularly wear‑resistant bimetal blade in HSS M42 quality Variable tooth pitch for sawing materials of different quality Recommended pitches 5/8, 6/10, 8/12, 10/14, 14/18 with 0° rake for vibration‑sensitive cuts and profile/tube sections of small to medium wall thickness Pitches 3/4 and 4/6 with positive rake for high cutting performance, universal use for normal steel, tool steel, high‑speed steel and non‑ferrous metals FAQ Which materials can be cut with this band saw blade? The TECWERK metal band saw blade in HSS M42 quality is designed for steels (including tool and stainless steels) and non‑ferrous metals; specific pitch groupings further optimise performance for profiles, tubes and solid sections. How does the variable pitch improve cutting results? Variable pitch reduces harmonic vibration during cutting, stabilising feed and improving surface finish; the 10–14 TPI grouping is especially suited to mixed cross‑section work and vibration‑prone sawing tasks. What machine size is required for the 1335 x 13 x 0.65 mm band? Bands of 1335 x 13 x 0.65 mm are compatible with common metalworking band saws that accept this standard length and width; check machine specifications to confirm rim diameter and guide clearance. Are there recommendations for cutting thin‑walled tubes and profiles? Yes—grouped pitches such as 5/8 through 14/18 with a 0° rake are recommended for thin to medium‑wall tubes and profiles, as they help control vibration and produce more consistent cuts. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of wear-resistant HSS M42 bimetal construction and a variable tooth pitch (8–12 TPI) for consistent, vibration-tolerant cutting across a wide range of metals; order directly via Metav Werkzeuge or contact the consultants for specification guidance. TECWERK metal bandsaw blade 1440 x 13 x 0.65 mm – HSS M42, 8–12 TPI The TECWERK metal bandsaw blade 1440 x 13 x 0.65 mm is a high-wear bimetal cutting blade designed for versatile sawing tasks in construction, tool and stainless steels, non-ferrous metals, profiles and tubes. High-wear HSS M42 bimetal construction Variable tooth pitch, 8–12 TPI Dimensions 1440 x 13 x 0.65 mm Suited to profile and tube cutting Reliable cutting performance for mixed-metal production The HSS M42 bimetal composition provides a hard, wear-resistant cutting edge welded to a flexible backing, delivering both durability and the resilience required for industrial use. This design reduces tooth breakage and extends service life compared with standard carbon blades, which translates into fewer blade changes and improved machine uptime. The specified 1440 x 13 x 0.65 mm dimensions make the blade suitable for many standard bandsaw frames, ensuring straightforward replacement and consistent blade tracking. Variable tooth pitch for adaptable feeds and finishes The blade’s variable tooth pitch (notably 8–12 TPI) combines coarse and fine tooth spacing along the cutting edge to balance chip clearance and finish. This arrangement reduces chatter in vibration-prone operations and is particularly effective when alternating between thicker sections and thin-walled profiles. For demanding throughput, the manufacturer recommends specific pitches (e.g., 5/8, 6/10, 8/12, 10/14, 14/18 at a 0° rake) to match material type and wall thickness; selecting the correct pitch improves cut quality and cycle consistency. Engineered for demanding materials and tricky geometries The bimetal edge, produced in HSS M42 quality, is suitable for a broad material spectrum—from mild and alloy steels to tool steels and stainless variants—while also coping with non-ferrous metals and solid stock. The combination of a wear-resistant tooth tip and a tougher backing strip allows reliable performance on profile and tube cutting of small to medium wall thicknesses. In operations where vibration is a concern, the mixed tooth spacing helps maintain a stable cutting action and reduces the risk of premature tooth wear. Practical guidance for selection and use When fitting the blade, ensure correct tension and alignment for optimal life and cut quality. The blade’s recommendation for positive or neutral rake angles should be applied according to the workpiece: pitches such as 3/4 and 4/6 with a positive rake are aimed at high material removal rates in tougher steels, while neutral 0° rake setups suit general-purpose cutting and vibration-sensitive tasks. Regular inspection for tooth wear and backing deformation will prevent unexpected failures and keep throughput steady. Discuss application specifics and stocking options with Metav Werkzeuge for tailored supply and fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814025NW Label: Metallsägeband 1440x13x0,65mm HSS M42 ZpZ 8-12 TECWERK Product type: Metal bandsaw blade Manufacturer: TECWERK Facts Length: 1440 mm Width: 13 mm Thickness: 0.65 mm Teeth per inch: 8–12 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth pitch: variable tooth pitch Recommended tooth pitches: 5/8, 6/10, 8/12, 10/14, 14/18 at 0° rake angle Applications: vibration-prone sawing, profile and tube cuts (small–medium wall thickness) Performance tips: pitches 3/4 and 4/6 with positive rake for high removal rates FAQ What materials can this bandsaw blade cut effectively? The TECWERK metal bandsaw blade in HSS M42 bimetal quality is suitable for construction steels, tool steels, stainless steels, non-ferrous metals and solid stock, as indicated by its wear-resistant composition. How does the variable tooth pitch affect cut quality? Variable tooth pitch reduces vibration and improves chip evacuation; the 8–12 TPI section of the blade balances surface finish and cutting speed for mixed-section workpieces. Which tooth pitch should be chosen for thin-walled tubes? For profile and tube cutting of smaller to medium wall thicknesses, the neutral pitches (for example 8/12 or 10/14 at 0° rake) recommended with this blade offer stable cutting and good finish. Is the blade suitable for high-volume production runs? The HSS M42 bimetal construction provides enhanced wear resistance and fatigue strength, making the blade well suited to continuous production, especially where mixed materials are processed. How is the blade identified for reordering? Reorder using the article number 2000814025NW and specify the TECWERK metal bandsaw blade, HSS M42, 1440 x 13 x 0.65 mm to ensure the correct item is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the wear-resistant HSS M42 bimetal construction combined with a variable tooth pitch (14–18 TPI) for reliable, vibration-resistant sawing across a range of materials; order the blade via Metav Werkzeuge or request technical advice from our consultants for seamless integration into production. TECWERK Metal band saw blade 1440 x 13 x 0.65 mm, HSS M42, variable pitch A TECWERK metal band saw blade designed for versatile workshop use, combining HSS M42 bimetal durability with a variable tooth pitch for controlled cutting in mixed materials. HSS M42 bimetal construction Variable tooth pitch 14–18 TPI Ideal for vibration-prone cuts 13 mm width and 0.65 mm thickness Consistent cutting performance through durable materials The HSS M42 bimetal design pairs a high-speed steel tooth edge with a flexible backing, giving long-lasting edge retention while maintaining blade flexibility. This combination reduces downtime from frequent blade changes and increases productivity in batch and single-part work. The wear-resistant bimetal formulation is especially beneficial where tool life and consistent kerf quality matter, such as when processing tool steels or mixed batches of different material grades. Reduced vibration and improved surface finish with variable pitch The variable tooth pitch reduces resonance and chatter during sawing, which leads to a smoother cut and fewer rejects. The blade’s 14–18 TPI range provides finer tooth spacing suitable for thinner-walled profiles, tubes and small-section materials where a controlled feed and reduced breakout are required. For jobs requiring higher material removal, the blade’s recommended alternate pitches with positive rake offer increased cutting performance without sacrificing stability. In practice, the variable geometry ensures adaptability across different workshop tasks, from profile trimming to detailed strip cutting. Practical dimensions and workshop readiness With dimensions of 1440 x 13 x 0.65 mm, the blade fits common band saw arbors while offering a narrow kerf for efficient material usage. The narrow 13 mm width and 0.65 mm thickness support accurate profiling in small to medium wall thicknesses, and the construction is suited to vibration-prone setups. Supplied in a pack of 5, the blades are prepared for quick replenishment of small- to medium-sized workshops and production lines, helping maintain throughput without excess inventory. Choose TECWERK HSS M42 blades via Metav Werkzeuge for tougher cutting tasks and contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich. Technical data Article number: 2000814027NW Product: Metal band saw blade Manufacturer: TECWERK Material: HSS M42 bimetal Dimensions: 1440 x 13 x 0.65 mm Tooth pitch: 14–18 TPI Packaging unit: 5 Facts Length: 1440 mm Width: 13 mm Thickness: 0.65 mm Teeth per inch: 14–18 SKU: 2000814027NW Pack size: 5 Special features Particularly wear-resistant bimetal in HSS M42 quality Variable tooth pitch for reduced vibration Recommended pitches and rake options for diverse tasks Suitable for profile and tube cuts with small to medium wall thickness Universally applicable to construction, tool and stainless steels, non-ferrous metals and solid material FAQ What materials can this blade cut effectively? The TECWERK metal band saw blade in HSS M42 quality is suitable for construction steels, tool steels, stainless steels, non-ferrous metals and solid sections, with variable pitches optimised for different wall thicknesses. Which tooth pitch should be chosen for vibration-prone saw jobs? Use the finer sections of the variable pitch, including the 14–18 TPI range with a 0° rake, for vibration-prone cuts and thin-walled profiles to improve stability and surface finish. Is this blade suitable for thicker profiles and higher removal rates? For higher removal and thicker profiles, select the coarser pitch options with a positive rake; the blade’s bimetal design supports increased performance without rapid wear. How is the blade supplied for workshop replenishment? The blade is supplied in packs of 5, providing ready replacement units to keep production moving with minimal stock handling. Can the blade be used on tube and profile sawing machines? Yes, the blade’s geometry and dimensions make it well suited to tube and profile cuts of small to medium wall thickness on compatible band saw machines. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a wear-resistant HSS M42 bimetal construction combined with a variable tooth pitch to handle a wide range of metal cutting tasks; the slim 13 mm width and 0.65 mm thickness support stable profile and tube cuts. Order the blade directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK bi-metal bandsaw blade 1440 x 13 x 0.65 mm — HSS M42, variable 10–14 TPI The TECWERK bi-metal bandsaw blade 1440 x 13 x 0.65 mm is a versatile metal-cutting blade designed for workshop and light industrial bandsaws, optimised for both profile and tube sawing. HSS M42 bimetal construction Variable tooth pitch 10–14 TPI 13 mm width, 0.65 mm thickness Suitable for vibration-prone profile and tube cuts Reliable cutting across a range of metals The HSS M42 bi-metal edge provides high wear resistance and toughness, making the blade suitable for mixed-metal tasks where tool life matters. With a variable tooth pitch (notably 10–14 TPI in this variant), the blade reduces chatter and improves feed stability when sawing sections of differing hardness. This translates to fewer stoppages, longer uninterrupted runs and a more predictable production rhythm — a practical advantage for workshops seeking efficiency and reduced downtime. Stable handling for profiles and tubes A narrow 13 mm blade with a 0.65 mm web minimises material loss while improving access into tight contours. The slim profile aids in cutting smaller diameter tubes and thinner-walled profiles with less distortion, and the construction helps deliver a reduced vibration signature during cutting. The result is cleaner kerfs and less rework when fabricating frames, brackets or piping assemblies, which supports faster throughput without sacrificing finish quality. Tooth geometry tuned for performance and versatility The blade offers tailored tooth-angle options for different applications: a 0° hook angle setting is recommended for low-vibration cuts and controlled stock removal, while pitches using a positive hook angle increase chip evacuation and cutting aggressiveness for higher material removal rates. Variable spacing balances the benefits of coarse and fine pitches in a single blade, so one tool can handle routine workshop steels and more demanding tool steels without frequent blade changes. Durable design and workshop-friendly supply Manufactured as a wear-resistant bimetal saw blade, this product is designed for repeated use in workshop environments where consistent results are required. Packaged in a pack of 5, the set supports continuous operation and reduces reordering frequency. Backed by Metav’s quality filter and decades of sourcing expertise, the blade fits operations that prefer consolidated suppliers and steady availability. For reliable metal sawing with proven durability, contact Metav Werkzeuge to discuss the TECWERK HSS M42 bandsaw blade (SKU 2000814026NW) and arrange purchase or expert application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000814026NW Label: Metallsägeband 1440x13x0,65mm HSS M42 ZpZ 10-14 TECWERK Product type: Metallsägeband Facts Total length: 1440 mm Width: 13 mm Thickness: 0.65 mm Teeth per inch: 10–14 TPI Packaging unit: 5 Special features Material: HSS M42 bimetal Tooth form: variable tooth pitch Suitable for: profile and tube cutting, vibration-prone sawing Recommended applications: construction steels, tool steels, stainless steels and non-ferrous metals depending on pitch/hook angle FAQ Which materials can this bandsaw blade cut effectively? The TECWERK bi-metal bandsaw blade (HSS M42) handles a wide range of materials; with the correct tooth pitch and hook angle it is suitable for steels, stainless steels and many non-ferrous metals, and is referenced as SKU 2000814026NW for verification. How does the variable tooth pitch improve cutting? Variable tooth pitch mixes coarse and fine spacing to reduce resonant vibration and improve chip evacuation; the 10–14 TPI range in this blade offers a compromise between smoothness and cutting speed for mixed-metal tasks. Is this blade suitable for thin-walled tubes and small profiles? Yes; the 13 mm width and 0.65 mm thickness are tailored for profile and tube work, allowing access into tighter contours while maintaining stability and a clean cut. What hook angle should be chosen for hard steels? For higher cutting performance in harder steels, pitches specified with a positive hook angle are recommended because they increase chip removal and material penetration; conversely, a 0° hook angle is advised for vibration-sensitive cuts. How is replacement and stock managed for workshop use? The blade is supplied in packs of 5 to support continuous operations; sourcing through Metav ensures steady availability and the option to consult on the correct pitch and setup. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

High durability and precise cutting are delivered by the combination of HSS M42 bimetal construction and a variable 10–14 TPI tooth pitch, ideal for mixed workshops seeking consistent results; order the metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for tailored application advice. Metal bandsaw blade 1638 x 13 x 0.65 mm — HSS M42, variable 10–14 TPI (TECWERK) Metal bandsaw blade 1638 x 13 x 0.65 mm — HSS M42 is a robust cutting solution for workshop and industrial sawing tasks, designed for profile, tube and plate cuts where material mix and vibration sensitivity demand a versatile blade HSS M42 bimetal construction Variable tooth pitch 10–14 TPI 13 mm width, 0.65 mm thickness Suited for steels and non-ferrous metals Reliable cutting across diverse materials The HSS M42 bimetal construction combines a wear-resistant cutting edge with a flexible backing strip, delivering an excellent balance between durability and resistance to breakage. This metal bandsaw blade with a variable tooth pitch of 10–14 TPI reduces the tendency to snag when alternating between thick and thin sections, keeping feed rates steady and reducing rework. For operations that require repeatable, clean cuts, the material pairing and tooth design translate directly into less downtime and fewer blade changes. Cleaner profiles in vibration-prone applications Built for sawing tasks that are sensitive to oscillation, the blade’s alternating pitch helps to break harmonic frequencies and maintain a steady cutting action. The recommended 0° chip angle for several tooth spacings contributes to controlled chip formation and reduced friction when cutting constructional and stainless steels. This results in neater profile edges and fewer secondary finishing steps, particularly when working with small to medium wall-thickness tubes and shaped sections. Tailored tooth geometry for performance and longevity Selected tooth spacings and rake configurations provide a practical compromise between aggressive material removal and extended life. Options with a positive rake angle boost cutting performance for tool steels and non-ferrous materials, while the mixed pitch reduces impact stress on individual teeth. The outcome is a blade that remains serviceable across a broad set of tasks — from demanding workshop jobs to production runs where consistency and life-cycle costs matter. Practical guidance for workshop use Intended for general workshop bandsaws and specialised sawing machines alike, this blade performs well on stainless steel, tool steel, aluminium and other non-ferrous metals, as well as full-section profiles. The modest 13 mm width and 0.65 mm thickness make the strip suitable for tight-radius cuts and narrower kerf requirements, while still providing enough stiffness for straight, accurate cuts. Correct tensioning and a suitable coolant strategy will extend service life and maintain cutting quality. For dependable supply of TECWERK HSS M42 blades and application-specific advice, contact Metav Werkzeuge in Emmerich — personalised consultancy and reliable delivery are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000813962NW Product: Metal bandsaw blade, TECWERK Packaging unit: 5 Core data Length: 1638 mm Width: 13 mm Thickness: 0.65 mm Tooth pitch: 10–14 TPI Materials & features Material: HSS M42 bimetal Tooth form: variable tooth pitch Recommended for: steels, stainless steel, tool steel, non-ferrous metals, profiles and tubes Rake angles: 0° and positive options for different pitches Suitable for vibration-prone sawing and small to medium wall thicknesses FAQ Which materials can this bandsaw blade cut effectively? The metal bandsaw blade 1638 x 13 x 0.65 mm HSS M42 with variable 10–14 TPI (SKU 2000813962NW) is designed for stainless steel, tool steel, construction steels, aluminium and other non-ferrous metals, plus full-section profiles and tubes. When is the 10–14 TPI spacing preferable? The 10–14 TPI range on this TECWERK blade is ideal where mixed-section cutting and vibration resistance are required, offering a compromise between chip clearance and smooth cutting on medium-thickness materials. Is the blade suitable for profile and tube cutting? Yes, the 13 mm width and the combination of variable pitches make this blade particularly suitable for profile and tube cuts of small to medium wall thickness, providing accurate contour following and reduced chatter. How does the HSS M42 bimetal construction affect service life? HSS M42 bimetal construction increases wear resistance at the cutting edge while retaining flexibility at the backing strip; this leads to longer life under cyclic loads compared with standard high-speed steels. What should be considered for optimal blade performance? Correct machine setup, appropriate tensioning and a compatible coolant or lubricant strategy are key to maximising life and cut quality with the TECWERK HSS M42 variable-pitch bandsaw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Durable HSS M42 bimetal construction combined with a variable tooth pitch delivers long blade life and reliable cutting across a wide range of steels and non‑ferrous metals. Benefit from versatile performance for profile, tube and solid‑stock sawing — order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK metal bandsaw blade 1735 x 13 x 0.90 mm – HSS M42, variable TPI The TECWERK metal bandsaw blade 1735 x 13 x 0.90 mm HSS M42 TPI 10–14 is a wear‑resistant bimetal blade optimised for vibration‑prone sawing and universal use in workshops and small production environments HSS M42 bimetal construction Variable tooth pitch 10–14 TPI Excellent for profiles and tubes High wear resistance for vibration-prone cuts Consistent cutting performance for diverse materials The blade’s HSS M42 bimetal composition provides a hard, wear‑resistant cutting edge bonded to a flexible backing, which increases service life without sacrificing toughness. This metallurgical combination translates into fewer blade changes and steadier cutting speeds in demanding shops. The construction is particularly advantageous where long runs or intermittent cutting of mixed materials require both edge retention and resistance to breakage, ensuring predictable output and reduced machine downtime. Optimised tooth geometry for efficient sawing A variable tooth pitch in the 10–14 TPI (teeth per inch) range reduces vibration and minimises chatter during cross‑section and profile cuts. Variable pitch means the spacing between teeth alternates, breaking up harmonic frequencies that cause poor surface finish or premature blade wear. Specified tooth configurations with neutral or positive rake angles support both low‑force, vibration‑sensitive operations and higher material removal rates where a more aggressive cut is required, improving cycle time or surface quality as needed. Suitable for delicate and heavy‑duty applications The blade is designed for universal use across stainless steel, tool steel, general construction steels and non‑ferrous metals, as well as for cutting smaller to medium wall‑thickness profiles and tubes. Its adaptability makes it a practical choice where workpieces vary in hardness and geometry: one blade type covers multiple tasks, reducing tool inventory and simplifying workshop logistics while maintaining acceptable cutting performance for different alloys and cross‑sections. Practical considerations for workshop use and maintenance Compatibility with standard band saw machines is straightforward thanks to the common dimensions 1735 x 13 x 0.90 mm and a stable balance between hardness and flexibility. The blade is supplied in a packaging unit of 5 which allows planned replacements and reduced downtime. Regular tension checks, correct tooth pitch selection for the workpiece and routine de‑burring of cut edges will prolong service life and preserve cutting quality, delivering predictable throughput and lower life‑cycle costs. For precise cutting performance with TECWERK HSS M42 blades, discuss the intended application and tooth pitch selection with Metav Werkzeuge — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to arrange technical advice and supply from our Emmerich facility. Technical data Article number: 2000814030NW Label: Metallsägeband 1735x13x0,90mm HSS M42 ZpZ 10-14 TECWERK Manufacturer: TECWERK Product type: Metallsägeband Packaging unit: 5 Numbers / Core technical data Overall length: 1735 mm Width: 13 mm Thickness: 0.9 mm Teeth per inch: 10–14 TPI Special features / Versions Material: HSS M42 bimetal Tooth pitch: variable tooth pitch Wear‑resistant bimetal design Recommended for profiles, tubes and solid material Suited for vibration‑prone sawing and mixed‑material applications FAQ Which materials can be cut with this blade? The TECWERK metal bandsaw blade is specified for a wide range of materials, including stainless steel, tool steel, general construction steels and non‑ferrous metals; the HSS M42 bimetal edge provides the necessary wear resistance. What does variable tooth pitch mean for cutting quality? Variable tooth pitch means the spacing alternates between different TPI values (here 10–14), which reduces vibration and chatter, improving surface finish and extending blade life during profile and tube cutting. Is this blade suitable for tube and profile cutting? Yes, the blade is optimised for profiles and tubes of small to medium wall thickness and performs well in vibration‑sensitive operations, as indicated in the product’s feature set. How many blades are supplied per pack? The packaging unit is 5, allowing planned replacements and stock control for continuous workshop use. How should the correct tooth pitch be chosen? Select tooth pitch according to material thickness and required cut quality: coarser pitches for thicker sections and aggressive removal, finer pitches for thin walls and smoother finishes; the TECWERK blade’s variable pitch provides flexibility across many tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS M42 bimetal construction together with the variable tooth pitch (6–10 TPI) and a slim 13 mm cutting width to achieve precise, vibration-resistant profile and tube cutting; order directly via Metav Werkzeuge or consult our specialists for application advice. Metal bandsaw blade 1735 x 13 x 0.90 mm (HSS M42, 6–10 TPI) – TECWERK metal bandsaw blade for demanding workshop cutting A metal bandsaw blade 1735 x 13 x 0.90 mm engineered for versatile sawing of construction steels, tool steels and a range of non‑ferrous metals in workshop and light industrial settings HSS M42 bimetal construction Variable tooth pitch 6–10 TPI 13 mm width, 0.90 mm thickness High wear resistance for long life Consistent cutting performance for mixed materials The HSS M42 bimetal design combines a high-speed steel cutting edge welded to a flexible backing strip, delivering a balance of hardness and toughness that reduces tooth breakage under load. This composition enables stable sawing across a wide variety of materials, from standard structural steels to tougher tool and stainless steels, and many non‑ferrous alloys. The result is a reliable cutting action with reduced risk of premature wear, meaning fewer blade changes and higher uptime on production or maintenance jobs. Reduced vibration and cleaner profile cuts With a variable tooth pitch configuration, the blade disperses cutting forces to lower harmonics and minimise chatter during profile and tube sawing. The recommended pitches (for example 5/8, 6/10, 8/12 and 10/14 with a 0° rake) offer particularly good performance for vibration‑prone operations and for cutting thinner to medium‑thick walls. For applications demanding higher material removal, finer positive‑rake pitches (such as 3/4 or 4/6) increase cutting aggressiveness. This flexibility translates into cleaner cut faces and reduced secondary finishing, improving process efficiency. Narrow kerf, durable life and economical operation A slim 13 mm width and 0.90 mm thickness produce a narrow kerf that minimises material loss and reduces feed forces, while the wear‑resistant bimetal teeth maintain edge geometry across longer runs. For workshops seeking cost‑effective throughput, this combination reduces material waste and service intervals. The blade is suitable for small and medium section profiles and pipes as well as for general construction and tool steels; selection of the proper tooth pitch adapts the tool to specific workpieces, offering both precision and productivity. For reliable supply and application support, select the TECWERK HSS M42 metal bandsaw blade from Metav Werkzeuge—expert advice and stocking from Emmerich ensure fast, dependable delivery and the right blade choice for the job Technical data Article number: 2000814028NW Label: Metallsägeband 1735x13x0,90mm HSS M42 ZpZ 6-10 TECWERK Manufacturer: TECWERK Facts Length: 1735 mm Width: 13 mm Thickness: 0.90 mm Teeth per inch: 6–10 TPI Special features HSS M42 bimetal Variable tooth pitch (ZpZ) Recommended tooth pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) Positive rake options: 3/4 and 4/6 for high cutting performance Suitable for profiles, pipes, construction steel, tool steel, stainless and non‑ferrous metals Packaging unit: 5 FAQ Which materials are suitable for this bandsaw blade? The TECWERK metal bandsaw blade in HSS M42 is suitable for construction steels, tool steels, stainless steels and many non‑ferrous metals, as indicated in the product description. What does variable tooth pitch mean for cutting results? Variable tooth pitch means the blade reduces vibration and chatter during cutting; the 6–10 TPI range provides a compromise between smoothness and cutting speed for profiles and pipes. Which tooth pitch is recommended for thin‑walled tubes and vibration‑prone work? Use the recommended 5/8, 6/10, 8/12 or 10/14 pitches with a 0° rake for vibration‑prone sawing and smaller to medium wall thicknesses, as specified for the blade. Can this blade be used for solid material and thicker profiles? Yes; select a coarser or positive‑rake tooth pitch (for example 3/4 or 4/6) to improve material removal when working with solid stock or thicker profiles. What are the main benefits of the HSS M42 bimetal construction? HSS M42 bimetal offers high hardness at the cutting edge combined with a tougher backing strip, yielding long life, resistance to tooth fracture and stable cutting performance. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of M42 HSS cutting performance, precise 1735 x 13 x 0.90 mm dimensions and direct compatibility with the Metallkraft MBS 150 for reliable, continuous metal cutting. Order the bandsaw blade directly via Metav Werkzeuge or contact the consultants for application advice. Metallkraft Sprint M42 bandsaw blade – 1735 x 13 x 0.90 mm, HSS M42, ZpZ 6–10 A Metallkraft Sprint M42 bandsaw blade designed for precision metal cutting in workshop and industrial saws, especially suitable for the Metallkraft MBS 150 High-performance HSS M42 teeth Dimensions 1735 x 13 x 0.90 mm ZpZ 6–10 tooth spacing Compatible with Metallkraft MBS 150 Precision and cutting performance that keeps production flowing The combination of HSS M42 construction and a defined tooth pattern delivers a consistent cutting action that supports efficient metalworking workflows. The high-speed steel grade is engineered for hardness and wear resistance, which translates into a longer blade life under typical industrial loads. For operations where repeatability matters, the stable cutting geometry maintains cut quality across batch runs, reducing machine downtime and ensuring steady throughput on production lines. Balanced tooth spacing for versatile metal cutting The ZpZ 6–10 tooth configuration achieves a balance between chip removal and surface finish, making the blade suitable for a range of ferrous and non-ferrous metal sections commonly encountered in workshops. The specified 1735 x 13 x 0.90 mm dimensions ensure compatibility with saws that accept this blade size while providing a predictable kerf and feed behaviour. This setup helps to reduce rework and optimise cycle times for mixed-production environments without sacrificing edge quality. Practical integration and supply reliability for professional shops Delivered in a single-unit pack, the bandsaw blade is ready for swift replacement and immediate use in compatible saws such as the Metallkraft MBS 150. Backed by Metav’s focus on accessible precision and a centralized European quality filter in Emmerich, the product forms part of a wide offering designed to simplify procurement and ensure steady supply. With Metav’s decades-long expertise, the reliable availability of consumables like this blade supports continuous operation and minimises interruptions to workshop schedules. For professional M42 cutting performance and confirmed compatibility with Metallkraft MBS 150, contact Metav Werkzeuge for tailored advice and safe ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000894303NW Description: Sprint M42 6-10 ZpZ suitable for Metallkraft MBS 150 Pack unit: 1 Numbers / Core technical data Length: 1735 mm Width: 13 mm Thickness: 0.90 mm Tooth spacing: ZpZ 6–10 Special features Material: HSS M42 Brand: METALLKRAFT Compatible with: Metallkraft MBS 150 Packaging unit: 1 FAQ What materials is this bandsaw blade intended for? The Metallsägeband 1735x13x0,90mm HSS M42 ZpZ 6-10 METALLKRAFT is specified for general metal cutting tasks; the HSS M42 grade supports demanding metalworking where wear resistance is required. Will this blade fit a Metallkraft MBS 150 saw? Yes, the Sprint M42 6–10 ZpZ specification is noted as suitable for the Metallkraft MBS 150, ensuring correct fit and function when the saw accepts the stated dimensions. How should the blade be stored between uses? Keep the bandsaw blade dry and protected from impacts; the HSS M42 construction benefits from clean, dry storage to maintain tooth integrity and prevent corrosion. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust HSS M42 bimetal construction combined with a variable tooth pitch for flexible workshop cutting. The 1735 x 13 x 0.90 mm design delivers precise cuts in profiles, tubes and a range of steels while minimising wear; order the blade directly via Metav Werkzeuge or consult our specialists for application-specific advice. Metal bandsaw blade 1735 x 13 x 0.90 mm – HSS M42, 8–12 TPI (TECWERK) The Metal bandsaw blade 1735 x 13 x 0.90 mm – HSS M42, 8–12 TPI (TECWERK) offers a high-wear resistance solution for mixed-material sawing, suited to workshop and light industrial tasks HSS M42 bi-metal construction Variable tooth pitch 8–12 TPI Width 13 mm, thickness 0.90 mm Suitable for vibration-prone cutting High-performance cutting across mixed materials Built from HSS M42 bimetal, the blade provides a balance between hardness and toughness that supports sustained cutting performance. The combination of a high-speed steel cutting edge welded to a flexible backing enables predictable tool life even under interrupted cuts. This means reliable removal rates when working with tool steels, stainless steel and non-ferrous metals; the robust edge metallurgy reduces the frequency of blade changes and contributes to steadier production throughput. Consistent results in vibration-prone setups Variable tooth pitch reduces harmonics and chatter in unstable or hand-fed machines, improving cut quality for smaller profiles and tubes. The 8–12 TPI section is optimised for thinner-walled profiles and general-purpose steel work, providing a compromise between chip clearance and surface finish. When faced with vibration-sensitive operations, the alternating pitch helps maintain straight, burr-reduced cuts and extends usable blade life compared with uniform-tooth alternatives. Practical tooth options for differing tasks The blade’s tooth geometry supports a range of cutting strategies: finer pitches for cleaner finishes and coarser configurations for aggressive stock removal. Recommended tooth settings include pitches tailored to profile thickness and material: options such as 5/8 and 6/10 for general work, and coarser patterns for full-section removal. This adaptability makes the blade a versatile choice for workshops that process a variety of materials without needing a large inventory of specialised blades. Workshop durability and operational efficiency With a 13 mm width and 0.90 mm thickness, the blade balances stiffness and flexibility for medium-length runs on standard bandsaws. The bimetal construction is especially wear-resistant, reducing downtime for blade changes and helping to maintain steady production. In practical terms, fewer tool changes and predictable cutting behaviour translate into better utilisation of machine time and lower indirect costs for busy shops. For reliable delivery from Metav Werkzeuge’s Emmerich stock and tailored cutting advice for TECWERK blades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814029NW Type: Metal bandsaw blade Material: HSS M42 bimetal Total length: 1,735 mm Width: 13 mm Thickness: 0.90 mm Toothing: Variable tooth pitch Tooth pitch: 8–12 TPI Manufacturer: TECWERK Packaging unit: 5 pieces Core specifications 1,735 mm length 13 mm width 0.90 mm thickness 8–12 teeth per inch Special features Especially wear-resistant bimetal blade Suitable for vibration-prone sawing Recommended pitches for profiles, tubes and general steel work Versatile for tool steels, stainless steels and non-ferrous metals FAQ What materials can this bandsaw blade cut effectively? The Metal bandsaw blade 1735 x 13 x 0.90 mm (TECWERK) is designed for general-purpose cutting of tool steels, stainless steels and non-ferrous metals, with tooth pitches that suit profiles, tubes and solid material. Is the blade suitable for machines prone to vibration? Yes, the variable tooth pitch on the TECWERK blade reduces harmonic vibration and chatter, making it well suited to vibration-prone setups and hand-fed sawing. Which tooth pitch should be chosen for thinner-walled profiles? For thinner-walled profiles, the finer end of the blade’s range (for example the 8–12 TPI setting) offers improved finish and control; the blade description also supports alternative pitches for different wall thicknesses. How does the HSS M42 bimetal construction affect blade life? The HSS M42 welded cutting edge provides elevated wear resistance while the flexible backing limits breakage, resulting in longer service life and fewer blade changes in everyday workshop use. What is included in the package for the SKU 2000814029NW? The packaging unit for SKU 2000814029NW contains 5 pieces of the TECWERK metal bandsaw blade. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine long service life with adaptable cutting performance thanks to the HSS M42 bimetal construction and variable tooth pitch; an efficient choice for demanding workshop applications. Order the blade directly via Metav Werkzeuge or consult our specialists for pitch recommendations. TECWERK metal bandsaw blade 2360 x 20 x 0.9 mm — HSS M42, variable pitch 6–10 TPI The TECWERK metal bandsaw blade 2360 x 20 x 0.9 mm is a high-performance cutting tool designed for reliable profile and tube sawing, optimised for vibration-prone tasks and a broad range of steels and non‑ferrous materials. HSS M42 bimetal construction Variable tooth pitch 6–10 TPI Blade size 2360 x 20 x 0.9 mm Suitable for steels and non‑ferrous metals Durable bimetal construction that reduces downtime The HSS M42 bimetal fusion bonds a high-speed steel cutting edge to a resilient backing, delivering superior wear resistance compared with conventional blades. This construction extends service intervals and reduces blade changes, which directly lowers machine downtime and labour costs. For workshops seeking repeatable results when cutting tool steels or stainless variants, the improved edge retention of a bimetal blade supports consistent productivity and fewer interruptions. Adaptable cutting behaviour via variable tooth pitch A variable tooth pitch improves chip evacuation and reduces tonal resonance during sawing, especially on irregular sections. The 6–10 TPI configuration offers a balance between cutting speed and finish quality: coarser pitches remove material rapidly, while finer groupings enhance surface finish. The variable arrangement also helps to avoid harmonic vibration, making the blade particularly effective for vibration‑prone sawing and smaller to medium wall‑thickness profiles and tubes. Exact dimensions for reliable machine integration With dimensions 2360 x 20 x 0.9 mm the blade fits machines accepting this standard length, width and thickness combination, ensuring precise tracking and stable tensioning during operation. The slim 0.9 mm thickness helps to reduce kerf loss while maintaining adequate rigidity for straight cuts. When combined with appropriate tooth pitch choices, the geometry enables efficient work on construction steels, tool steels, stainless steels and a variety of non‑ferrous materials without frequent adjustments. Shop-floor advantages: performance, versatility and choice Selecting a blade with HSS M42 and a variable tooth pitch offers a cost-effective route to improved throughput: longer blade life, fewer replacements and better cut quality translate into lower total operating cost per metre cut. The blade’s suitability for both profiling and tubing tasks provides versatility across job types, while the available pitch recommendations (including options with 0° or positive rake) allow fine-tuning for either vibration control or higher metal‑removal rates. For workshops aiming to standardise tools without sacrificing performance, this blade represents a practical compromise between speed and finish. For demanding metal‑cutting applications, choose the TECWERK HSS M42 metal bandsaw blade from Metav Werkzeuge — contact Metav Werkzeuge's specialists for tailored tooth‑pitch advice and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000813963NW Product: Metal bandsaw blade Manufacturer: TECWERK Material: HSS M42 bimetal Dimensions: 2360 x 20 x 0.9 mm Tooth pitch: variable 6–10 TPI Tooth spacing type: variable tooth pitch Packaging unit: 5 Facts Length: 2360 mm Width: 20 mm Thickness: 0.9 mm Teeth per inch: 6–10 TPI Special features Particularly wear‑resistant bimetal blade in HSS M42 quality Variable tooth pitch for mixed material cutting Recommended pitches for vibration control and high removal rates Well suited for profile and tube cuts of small to medium wall thickness Universally applicable for construction, tool and stainless steels and non‑ferrous metals FAQ What materials can this bandsaw blade machine? The TECWERK metal bandsaw blade in HSS M42 quality is suitable for a wide range of materials including construction steels, tool steels, stainless steels and various non‑ferrous metals. How does the variable tooth pitch improve cutting? A variable tooth pitch reduces vibration and improves chip evacuation; the 6–10 TPI grouping offers a compromise between cutting speed and surface finish for mixed‑material production. Which tooth pitch should be chosen for tube cutting? For profile and tube cuts of small to medium wall thickness, the variable 6–10 TPI option with a 0° rake is recommended for stable, low‑vibration sawing with the TECWERK metal bandsaw blade. How long is the blade and will it fit standard machines? The blade is 2360 mm long with a 20 mm width and 0.9 mm thickness; this dimension set is compatible with machines designed for that blade size and provides reliable tracking and tensioning. Is the blade suitable for high‑speed cutting? The HSS M42 bimetal edge is designed for robust cutting and good wear resistance; selection of tooth pitch and machine parameters will determine optimal cutting speed and removal rates. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a durable HSS M42 bimetal construction and a variable tooth pitch that adapts to a wide range of metals and profiles for reliable, low-maintenance cutting performance; order directly via Metav Werkzeuge or ask the consultants for tailored guidance. TECWERK metal band saw blade 2360 x 20 x 0.90 mm — HSS M42, 10–14 TPI variable pitch The TECWERK metal band saw blade is designed for versatile workshop use, offering wear-resistant bimetal cutting edges and a variable tooth pitch for clean cuts across steels, non-ferrous metals and profiles. HSS M42 bimetal construction for long life Variable tooth pitch for mixed-material cutting Optimised for vibration-prone profile and tube cuts Suitable for a wide range of steels and non-ferrous metals High durability from advanced bimetal design The HSS M42 bimetal construction combines a high-speed steel cutting edge welded to a flexible backing, delivering both hardness at the teeth and toughness along the body. This makes the blade particularly wear-resistant under prolonged use and less prone to tooth breakage during interrupted cuts. For workshops seeking consistent performance, the blended metallurgy reduces rework and extends service intervals, which in turn lowers total operating cost. Versatile tooth geometry for differing materials A variable tooth pitch (10–14 TPI) balances chip removal and surface finish when workpieces vary in thickness and toughness. Lower pitch settings and positive rake configurations increase material removal rates for thicker sections, while finer pitches and a 0° rake promote smoother finishes on thinner or delicate profiles. The blade’s recommended pitch schemes support both profile and tube cutting and are advantageous when vibration is likely, improving cut stability and reducing noise. Practical benefits for workshop productivity With overall dimensions of 2360 x 20 x 0.90 mm, this band saw blade fits common industrial saw frames and maintains a consistent kerf for repeatable cuts. The robust construction allows for higher feed rates where appropriate, helping to shorten cycle times without sacrificing blade life. For maintenance teams, fewer blade changes and predictable wear behaviour translate directly into reduced downtime and improved throughput—key metrics for production-driven environments. For demanding metal-cutting tasks choose the TECWERK HSS M42 band saw blade and contact Metav Werkzeuge in Emmerich for individual advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000813964NW Product type: Metal band saw blade Manufacturer: TECWERK Label: Metallsägeband 2360x20x0,90mm HSS M42 ZpZ 10-14 Facts Overall length: 2360 mm Width: 20 mm Thickness: 0.90 mm Teeth per inch: 10–14 TPI Pack quantity: 5 Special features Material: HSS M42 bimetal Tooth form: variable tooth pitch Recommended uses: profile and tube cuts, vibration-prone cutting Application notes: tooth pitch schemes for 0° and positive rake for varying materials and wall thicknesses FAQ What materials can this blade cut effectively? The TECWERK metal band saw blade is suitable for a wide range of materials including construction steels, tool steels and non-ferrous metals, with tooth pitch options to match different thicknesses and toughness. How does the HSS M42 bimetal construction benefit workshop use? HSS M42 bimetal offers a hardened cutting edge bonded to a tougher backing, giving the blade both wear resistance and flexibility; this reduces tooth breakage and extends service life. Is the blade suitable for cutting thin-walled tubes and profiles? Yes, the variable tooth pitch and specific 0° rake recommendations make the blade well suited to profile and tube cutting, especially where vibration control is important. Which tooth pitch should be chosen for high material removal? For higher removal rates and thicker sections, a coarser pitch combined with a positive rake increases cutting performance; consult the blade’s pitch recommendations for optimal setup. Can this blade be used in standard industrial saw frames? The blade dimensions 2360 x 20 x 0.90 mm match common industrial frames; verify machine compatibility and tensioning requirements before fitting. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from a durable HSS M42 bimetal construction, a variable tooth pitch for versatile cutting performance and a narrow 27 mm width that keeps cuts precise and controllable; order the blade directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TECWERK metal bandsaw blade 2450 x 27 x 0.90 mm — HSS M42, variable tooth pitch 6–10 TPI A TECWERK metal bandsaw blade 2450 x 27 x 0.90 mm engineered for versatile sawing tasks in mixed materials, offering wear resistance and adaptability for both profile and tube cutting. HSS M42 bimetal construction Variable tooth pitch 6–10 TPI 27 mm width for profile and tube cutting Suitable for steels and non‑ferrous metals Robust alloy for continuous workshop use and extended lifetime The HSS M42 bimetal composition combines a high-speed steel cutting edge with a resilient backing strip, providing a balance of wear resistance and flexibility that supports long runtime in production environments. This construction reduces tooth failure and keeps re‑set intervals low, which translates into predictable tool life and lower process interruptions. The durable assembly is particularly useful where replacement downtime must be minimised and consistent cutting quality is required. Versatile tooth geometry that adapts to material mixes and unstable setups The variable tooth pitch (6–10 TPI) reduces harmonic vibration and improves chip evacuation when cutting mixed or inconsistent stock. Variable spacing means fewer resonance issues on thin‑walled profiles and tubes, so the tool delivers smoother cuts on vibration‑prone tasks. Specific toothings and recommended rake angles in the product specification allow selection of the best pitch for a given application, enabling higher material removal rates or finer finishes as required. Precise dimensions and practical suitability for workshop applications The blade’s nominal size of 2450 x 27 x 0.90 mm and narrowly profiled 27 mm width make it suitable for smaller and medium wall‑thickness profiles and pipes where controlled kerf and access are critical. The specified 6–10 TPI range covers general‑purpose sawing in construction, tool, and stainless steels as well as non‑ferrous metals, while alternative toothings are available for higher removal performance on solid material. The blade’s geometry supports efficient cutting with reduced burr formation, aiding downstream processing and finishing. Contact Metav Werkzeuge to discuss the TECWERK HSS M42 bandsaw blade and select the tooth pitch best suited to specific cutting tasks — Metav’s advisers provide technical guidance from Emmerich to ensure a reliable supply for production needs. Technical data Article number: 2000813965NW Designation: Metal bandsaw blade 2450 x 27 x 0.90 mm, HSS M42, TECWERK Manufacturer: TECWERK Facts Overall length: 2450 mm Width: 27 mm Thickness: 0.9 mm Teeth per inch: 6–10 TPI Packaging unit: 5 Special features HSS M42 bimetal construction Variable tooth pitch for mixed materials Recommended toothing and rake angles for different applications Suitable for profile and tube cutting and vibration‑prone sawing FAQ What materials can be sawn with this bandsaw blade? The TECWERK metal bandsaw blade (SKU 2000813965NW) is suitable for steels, tool and high‑speed steels, stainless steel and non‑ferrous metals, with recommended toothings for different material groups. How does the variable tooth pitch improve cutting performance? Variable tooth pitch minimises resonant vibration and improves chip flow; the 6–10 TPI range offers a compromise between cutting speed and finish for mixed material sawing. When is HSS M42 bimetal preferred over other blade types? HSS M42 bimetal is selected where high wear resistance and edge stability are required under continuous operation, providing longer life than simple carbon or low‑alloy blades. Which tooth pitch should be chosen for thin‑walled tubes and profiles? For vibration‑sensitive profile and tube cutting, the document recommends pitches with 0° rake and variable spacing such as 6–10 TPI to reduce chatter and maintain a clean kerf. Is the blade suitable for heavy solid-section cutting? For heavier full‑section work, coarser toothings and positive rake geometries are advised; the blade’s design supports selection of appropriate tooth pitch for higher material removal rates. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a wear-resistant HSS M42 bimetal design combined with a variable tooth pitch to achieve reliable cuts across mixed materials; order directly via Metav Werkzeuge or contact our consultants for tailored advice. TECWERK metal band saw blade 2450 x 27 x 0.90 mm – HSS M42, variable 5–8 TPI The TECWERK metal band saw blade 2450 x 27 x 0.90 mm is engineered for precise and versatile metal cutting, combining a durable HSS M42 bimetal edge with a variable tooth pitch for demanding workshop and industrial applications. *HSS M42 bimetal for high wear resistance *2450 x 27 x 0.90 mm for standard band saw frames *Variable tooth pitch, 5–8 TPI for versatile cutting *Suitable for steels, tool steels and non-ferrous metals Consistent cuts across varying materials The HSS M42 bimetal construction delivers a balance of toughness and hardness that extends blade life under continuous use. The variable tooth pitch reduces harmonic vibration and distributes cutting forces, which improves the cut quality on mixed batches of workpieces. For workshops that face frequent material changes, this results in steadier feeds, fewer rejected parts and a measurable reduction in machine stoppages. Technical terms: HSS M42 denotes a high-speed steel cobalt alloy welded to a backing, giving a hard cutting edge and a resilient body. Reduced downtime and easier maintenance With a thickness of 0.90 mm and a width of 27 mm, the blade fits frames designed for common industrial band saws and is resistant to premature wear thanks to its brazed bimetal construction. The nominal size 2450 x 27 x 0.90 mm ensures compatibility with standard machines, while the material selection contributes to a longer service interval compared with conventional carbon-steel blades. The practical benefit is fewer blade changes and more productive machine hours in day-to-day production. Designed for profiles, tubes and vibration-prone cuts The toothing recommendations supplied with the blade show how to match geometry to application: coarser and variable pitches such as 5–8 TPI with a neutral rake are ideal for vibration-prone cutting and for profiles and tubes of small to medium wall thickness. Finer pitches with a positive rake (examples given in the technical data) are suggested where high removal rates are required. These options permit optimisation of cutting speed and surface finish for profiles and tubes without changing the base blade. Versatility for workshop and industrial needs Beyond steels, the blade’s tooth geometry and cobalt-alloy edge make it suitable for tool steel, stainless steels and a range of non-ferrous materials, as well as solid sections and thicker profiles. Choosing the appropriate tooth pitch and feed yields improved chip evacuation and cooler cutting, which together extend tool life and maintain dimensional accuracy. The combination of wear resistance and adaptable tooth spacing gives a reliable, universal solution for workshops seeking consistent performance with minimal set-up changes. For supply, technical clarification or to discuss the best tooth pitch for a specific application, contact Metav Werkzeuge in Emmerich — Metav’s specialists can advise on TECWERK HSS M42 blades and arrange prompt delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000814002NW Product name: Metallsägeband 2450x27x0,90mm HSS M42 ZpZ 5-8 TECWERK Manufacturer: TECWERK Product type: Metallsägeband Facts Width: 27 mm Thickness: 0.9 mm Total length: 2450 mm Teeth per inch: 5–8 TPI Pack unit: 5 Special features Material: HSS M42 bimetal Tooth form: variable tooth pitch Application: profile and tube cutting, general metal sawing Recommended toothings: 5/8, 6/10, 8/12, 10/14, 14/18 with 0° rake for vibration-prone cuts Recommended toothings: 3/4, 4/6 with positive rake for high cutting performance FAQ Which materials can be cut with this band saw blade? The TECWERK metal band saw blade 2450 x 27 x 0.90 mm is suitable for construction steels, tool steels, stainless steels, non-ferrous metals, solid material and profiles as outlined in the technical guidance. What tooth pitch is best for cutting tubes and thin-walled profiles? For tubes and smaller to medium wall-thickness profiles, the variable pitches such as 5–8 TPI with a 0° rake are recommended for stable, vibration-resistant cutting with the TECWERK blade. Can this blade be used for high-performance metal removal? Yes — toothings like 3/4 and 4/6 with a positive rake are specified for higher cutting performance and are suitable for normal, tool and high-speed steels as well as non-ferrous metals when using this TECWERK bimetal blade. Will the blade fit standard band saw machines? The blade dimensions 2450 x 27 x 0.90 mm correspond to common band saw frame sizes; compatibility should be checked against the machine’s blade length and width specifications. How does durability compare with standard blades? Thanks to the HSS M42 bimetal edge and variable tooth spacing, the blade offers improved wear resistance and longer operational life compared with basic carbon-steel blades, reducing the frequency of replacements. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the HSS M42 bi‑metal construction and variable tooth pitch to achieve consistent cut quality and long service life; order directly via Metav Werkzeuge or consult the Metav team for selection and rapid delivery. TECWERK Bi‑metal HSS M42 band saw blade 2480 x 27 x 0.90 mm, 6–10 TPI The TECWERK Bi‑metal HSS M42 band saw blade 2480 x 27 x 0.90 mm is a versatile metal-cutting blade engineered for profile and pipe sawing, offering high wear resistance and reliable performance in mixed-material applications. Bi‑metal HSS M42 for high wear resistance Variable tooth pitch 6–10 TPI for mixed materials 2480 x 27 x 0.90 mm for standard band saw frames Pack of 5 blades for workshop readiness Durable construction for demanding production environments The blade’s HSS M42 bi‑metal construction combines a high-speed steel cutting edge with a flexible backing, providing enhanced wear resistance while retaining necessary toughness. This design reduces breakage risk and extends blade life in continuous operation. Bi‑metal means the cutting teeth are welded to a resilient steel strip, so the blade resists tooth fracture under fluctuating loads and keeps cutting performance stable over time. Such material engineering supports predictable production planning and reduces downtime associated with frequent blade changes. Variable tooth pitch and cutting behaviour explained A variable tooth pitch (6–10 TPI) spreads cutting forces across differing tooth sizes to reduce vibration and prevent harmonic chatter on thin-walled or irregular sections. Variable pitch is particularly effective in vibration‑prone cuts, producing smoother feed and better surface finish compared with single‑pitch blades. In practice, the mixed tooth spacing suits a broad spectrum of tasks — from thin-walled profiles to medium‑thickness pipe sections — by improving tooth engagement, reducing tooth breakage and delivering consistent chip evacuation for cleaner cuts. Compatibility, handling and workshop advantages With a blade length of 2480 mm, width of 27 mm and thickness of 0.90 mm, the blade fits many standard band saw frames and offers a balance between stiffness and flexibility for profile and tube sawing. The supplied pack of five ensures quick replacement cycles and steady inventory for small production runs. Recommended toothing strategies and rake‑angle choices make the blade universally applicable: neutral rake for quieter, low‑vibration operation and positive rake where higher material removal rates are required. The combination of stable geometry and robust alloy makes the blade suitable for construction steel, tool and stainless steels, non‑ferrous metals and solid sections. Choose the TECWERK HSS M42 bi‑metal band saw blades for reliable, long‑running performance — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000813967NW Label: Metallsägeband 2480x27x0,90mm HSS M42 ZpZ 6-10 TECWERK Product type: Band saw blade Brand: TECWERK Pack quantity: 5 Facts Length: 2480 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 6–10 TPI Tooth pitch type: Variable Special features HSS M42 bi‑metal construction Variable tooth pitch for reduced vibration Suitable for profile and pipe cutting Recommended for construction, tool and stainless steels Pack of 5 blades for quick replacement FAQ What materials can this band saw blade cut effectively? The TECWERK bi‑metal HSS M42 band saw blade is suitable for construction steel, tool steel, stainless steel and non‑ferrous metals, and performs well on profiles, pipes and solid sections according to the specified toothings. How does the variable tooth pitch improve cutting? Variable tooth pitch (6–10 TPI) reduces vibration and chatter during sawing, improving surface finish and extending service life compared with single‑pitch blades in mixed or irregular workpieces. Which blade dimensions are required for compatibility with standard frames? This blade is 2480 mm long, 27 mm wide and 0.90 mm thick, matching many standard band saw frames designed for narrow‑width cutting operations. How many blades come in one pack and why is that useful? The delivery unit contains a pack of 5 blades, providing spare blades for continuous workflow and faster replacement in busy workshops. Are there recommendations for tooth geometry and rake angle? The blade supports neutral rake angles for vibration‑sensitive cuts and positive rake for higher cutting performance; toothing choices optimise results across thin to medium wall thicknesses. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS M42 durability with a variable tooth pitch, this TECWERK metal band saw blade offers durable, versatile cutting across a range of steels and non-ferrous metals; order the blade directly via Metav Werkzeuge or consult our specialists for tailored application advice. TECWERK Metal Band Saw Blade 2480 x 27 x 0.9 mm — HSS M42, Variable Pitch (5–8 TPI) A TECWERK metal band saw blade engineered for workshop and light industrial sawing of construction steels, tool steels and non-ferrous materials with an emphasis on wear resistance and smooth running. HSS M42 bimetal for long tool life Variable tooth pitch 5–8 TPI for mixed materials 2480 × 27 × 0.9 mm for common band saw frames Durable cutting performance that reduces downtime The HSS M42 composition provides significantly improved wear resistance compared with conventional high-speed steels, which means fewer blade changes and longer productive shifts. The bimetal construction combines a high-speed steel tooth edge welded to a spring-steel backing, yielding a balance of cutting hardness and fatigue strength. For workshops aiming to maximise uptime, this results in a measurable reduction in maintenance interventions and consistent cut quality over longer runs. Tooth geometry tuned for material flexibility and consistent cuts Its variable tooth pitch accommodates a wide range of materials and section sizes, reducing vibration and improving chip evacuation. The standard recommended tooth patterns (for example 5–8 TPI) with a neutral 0° rake are ideal for vibration-prone cutting and for sawing tubes and profiles with small to medium wall thicknesses. When higher metal removal is required, finer pitches with a positive rake deliver greater cutting performance for solid sections and tougher steels. This allows selection of the most appropriate pitch for either fine, precision cuts or faster stock removal. Stable cutting on profiles and vibration‑sensitive jobs Designed especially for profile and pipe cutting as well as shorter, vibration-prone setups, the blade’s variable pitch and robust backing reduce chatter and improve surface finish. The construction is suited to workshop environments that process a mix of construction, tool and stainless steels, plus non-ferrous alloys and solid bars. The result is a reliable blade that produces cleaner kerfs and extended life, helping to maintain throughput and reduce rejects in everyday production. Contact Metav Werkzeuge in Emmerich for application-specific recommendations and secure supply of this TECWERK HSS M42 metal band saw blade for dependable workshop results Technical data Article number: 2000813966NW Product: TECWERK metal band saw blade Manufacturer: TECWERK Facts Length: 2480 mm Width: 27 mm Thickness: 0.9 mm Teeth: 5–8 TPI Special features Material: HSS M42 bimetal Toothing: variable tooth pitch Recommended: 0° rake for 5/8, 6/10, 8/12, 10/14, 14/18 for vibration‑prone cuts Positive rake options (e.g., 3/4, 4/6) for high removal rates Suitable for construction, tool and stainless steels, non‑ferrous metals, solid sections, pipes and profiles FAQ What materials can be cut with this blade? The TECWERK metal band saw blade (SKU 2000813966NW) is suitable for construction steels, tool steels, stainless steels and non‑ferrous metals, as well as solid sections and profiles. Which tooth pitch should be chosen for thin‑walled tubing? For vibration‑sensitive tubing and smaller wall thicknesses, the neutral 0° rake patterns such as 5–8 TPI are recommended for the best balance of stability and chip evacuation with this blade. Is the blade suitable for high removal rate jobs? Yes, positive rake tooth patterns (for example 3/4 or 4/6) are available within the recommended options and provide higher cutting performance for heavy stock removal with the HSS M42 construction. How does the bimetal construction benefit workshop use? The bimetal design combines a hard HSS M42 cutting edge with a flexible backing, delivering improved tooth life and resistance to fatigue—resulting in fewer blade changes and more consistent production performance. Can this blade be fitted to standard band saw frames? The 2480 × 27 × 0.9 mm specification matches common band saw frame sizes; compatibility should be confirmed against the saw manufacturer’s guidance and blade guides. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable, wear‑resistant cutting edge and a variable tooth pitch that reduces vibration for cleaner cuts; order the TECWERK blade directly via Metav Werkzeuge or request technical advice from the consultants at Emmerich. TECWERK HSS M42 bimetal bandsaw blade 2700 x 27 x 0.90 mm – variable pitch 5–8 TPI for mixed‑material cutting TECWERK HSS M42 bimetal bandsaw blade 2700 x 27 x 0.90 mm is built for workshop and industrial sawing tasks involving profiles, pipes and solid sections where durability and reduced chatter are essential HSS M42 bimetal construction Variable tooth pitch 5–8 TPI 27 mm width and 0.90 mm thickness Suited to profile, pipe and solid cuts Consistent cutting performance for mixed materials The HSS M42 composition provides a cobalt‑alloyed high‑speed steel cutting edge that combines wear resistance with toughness. This construction enables steady performance in frequent sawing operations and helps maintain the cutting geometry for longer runs. For many fabrication shops and toolrooms this translates into fewer blade changes and more predictable cycle times, which supports efficient workflow and lower stand‑still risk. Reduced vibration and improved surface finish The variable pitch tooth design (5–8 TPI) disrupts harmonic vibration during cutting, which significantly reduces chatter on thin‑walled sections and irregular profiles. For vibration‑prone sawing tasks the outcome is a cleaner cut and reduced need for secondary finishing. The variable spacing also helps the blade adapt to a mix of materials in a single cut, maintaining feed stability and edge engagement. Flexible tooth options for application tuning Recommended tooth spacings are provided for different jobs: pitches such as 5/8, 6/10, 8/12, 10/14 and 14/18 with a 0° rake are ideal for vibration‑sensitive cuts and smaller to medium wall‑thickness profiles, while 3/4 and 4/6 with a positive rake deliver higher cutting performance for tougher jobs. These recommendations allow workshops to select the most effective pitch for materials from non‑ferrous metals up to tool steels, improving productivity and blade life. Practical geometry for standard saw frames With a nominal length of 2700 mm, a width of 27 mm and a thickness of 0.90 mm, the blade fits common industrial band saw frames used for both production and repair tasks. The 27 mm width balances lateral stiffness and access into tighter contours, while the 0.90 mm body reduces kerf loss where material retention and minimised waste are priorities. This geometry suits a range of routine sawing applications without overloading typical saw drives. Reliable choice for workshop and light industrial use As a bimetal bandsaw blade, the product is specified for universal use: from structural steels and stainless steels to non‑ferrous alloys and solid sections. The combination of a hardened cutting edge and a flexible backing strip supports resistance to edge fracture and allows consistent performance in intermittent cutting conditions. Metav’s supply from Emmerich ensures availability and expert advice for integrating the blade into a production line. For supply and specification support on the TECWERK HSS M42 bimetal bandsaw blade, contact Metav Werkzeuge in Emmerich for ordering and tailored technical guidance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: 2000813968NW Manufacturer: TECWERK Product type: Metal bandsaw blade Material: HSS M42 bimetal Facts Overall length: 2700 mm Width: 27 mm Thickness: 0.90 mm Tooth pitch: 5–8 TPI Packaging unit: 5 Special features Variable tooth pitch for reduced vibration Recommended pitches: 5/8, 6/10, 8/12, 10/14, 14/18 (0° rake) Positive rake options 3/4 and 4/6 for high removal rates Suited to profiles, pipes and solid material Universal use on tool steel, stainless steel and non‑ferrous metals FAQ Which materials can be cut with this bandsaw blade? The TECWERK HSS M42 bimetal bandsaw blade (SKU 2000813968NW) is suitable for carbon steel, tool steel, stainless steel and common non‑ferrous metals, as well as profiles and pipes. How does the variable tooth pitch affect cutting? Variable pitch (5–8 TPI) reduces harmonic vibration and chatter, yielding a smoother cut surface and better feed stability in mixed‑material or thin‑walled applications. Which tooth pitch should be used for thin, vibration‑prone profiles? Pitches such as 5/8, 6/10 or 8/12 with a 0° rake are recommended for vibration‑sensitive sawing of small to medium wall‑thickness profiles and tubular sections. Is this blade suitable for high metal removal rates? Yes; the 3/4 and 4/6 tooth spacing options with a positive rake are intended for higher removal rates and more aggressive cutting in tougher materials. How is the product supplied? The item is supplied in a packaging unit of 5 and is intended for standard industrial saw frames compatible with a 2700 mm blade length. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a wear‑resistant HSS M42 bimetal construction combined with a variable tooth pitch for dependable cuts across mixed materials; order directly from Metav Werkzeuge or consult the team for application advice. TECWERK metal cutting band saw blade 2700 x 27 x 0.90 mm, HSS M42, variable 6–10 TPI The TECWERK metal cutting band saw blade is a versatile bimetal blade designed for workshop and light industrial sawing of profiles, tubes and solid sections. HSS M42 bimetal construction for long life Variable tooth pitch 6–10 TPI for mixed materials 2700 x 27 x 0.90 mm for standard band saws Suited to profiles and thin‑walled tubes Durable bimetal design for continuous workshop use The blade combines a flexible backing with high‑speed steel teeth (HSS M42), producing a bimetal band saw blade that resists heat and abrasive wear. This welding of hardened cutting edges to an elastic body means fewer blade changes and less downtime, supporting steady production in busy shops. The 2700 x 27 x 0.90 mm format fits common machines while the robust tooth material improves life when cutting demanding alloys. In practice, this construction translates into reduced tooling costs per cut and predictable performance for series work. Variable tooth geometry for flexible performance A variable tooth pitch (6–10 TPI) allows a single blade to handle an array of materials with differing section sizes. Coarser pitches favour faster stock removal on thicker sections; finer pitches give better surface finish on thinner sheets or small‑section profiling. The blade data also recommends specific pitch groups and rake settings: several pitches with a 0° rake angle are ideal for vibration‑sensitive cuts, while pitches with a positive rake increase cutting aggressiveness for high removal rates. These design choices minimise chatter and re‑feeds, improving cut quality on profiles and tubes as well as on tool, construction and stainless steels. Practical advantages and recommended applications With a variable tooth layout and HSS M42 teeth, the blade is especially useful for profile and pipe cutting of small to medium wall thicknesses and for tasks where vibration is a concern. The combination is suitable for normal, tool and high‑speed steels and for many non‑ferrous metals, offering one blade for a broad set of workshop jobs. Packaged in units of five, the format supports routine replacement cycles without complex inventory. The material and tooth concept also means less burr and a more consistent kerf, simplifying subsequent finishing operations. Choose the TECWERK HSS M42 bi‑metal band saw blade for durable, vibration‑resistant cutting and contact Metav Werkzeuge in Emmerich for ordering or tailored technical advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000813969NW Product type: metal cutting band saw blade Brand: TECWERK Material: HSS M42 bimetal Dimensions: 2700 x 27 x 0.90 mm Tooth pitch: variable, 6–10 TPI Packaging unit: 5 Facts Overall length: 2700 mm Width: 27 mm Thickness: 0.90 mm Teeth per inch: 6–10 SKU: 2000813969NW Special features Particularly wear‑resistant bimetal construction Variable tooth pitch for diverse materials Recommended pitches and rake settings for different applications Excellent for vibration‑sensitive sawing Suitable for profile and tube cutting, small/medium wall thicknesses Applicable to construction, tool and stainless steels and many non‑ferrous metals FAQ What materials can be sawn with this blade? The TECWERK metal cutting band saw blade with HSS M42 teeth is suitable for a wide range of materials, including construction steels, tool steels, stainless steels and many non‑ferrous metals, as well as profiles and tubes of small to medium wall thickness. Which tooth pitch should be chosen for vibration‑prone cuts? For vibration‑sensitive sawing, the recommended pitches with a 0° rake angle from the blade’s specification provide greater stability and cleaner cuts. Is this blade compatible with standard band saw machines? Yes, the 2700 x 27 x 0.90 mm format fits common workshop band saws designed for that blade size; check machine compatibility before fitting. How does the HSS M42 bimetal construction benefit workshop operations? HSS M42 teeth welded to a flexible backing offer prolonged edge life and heat resistance, reducing blade changes and supporting continuous production in demanding applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund