1140mm Bi‑metal HSS M42 Variable Pitch Metal Bandsaw Blade 13mm x 0.51mm, 14–18 TPI - TECWERK

Take advantage of the HSS M42 bimetal construction and variable tooth pitch to achieve long blade life and flexible cutting performance across steels and non‑ferrous metals. Order the TECWERK metal bandsaw blade directly via Metav Werkzeuge or consult our specialists for tailored application advice.

TECWERK Metal Bandsaw Blade 1140 x 13 x 0.51 mm — HSS M42, variable 14–18 tpi

The TECWERK Metal Bandsaw Blade 1140 x 13 x 0.51 mm is a wear‑resistant HSS M42 bimetal blade engineered for versatile metal cutting tasks such as profile, tube and plate work.

• HSS M42 bimetal construction for long life
• Variable tooth pitch 14–18 tpi for versatility
• 13 mm width, 0.51 mm thickness for precise cuts
• Suited for steels, non‑ferrous metals and profiles

Consistent performance across mixed materials

The HSS M42 bimetal composition combines a hardened tooth edge with a flexible backing strip, delivering both wear resistance and fracture toughness. This material pairing reduces the risk of premature tooth failure and maintains cutting quality over extended runs, which is especially valuable in mixed‑material production environments. The construction supports steady feed rates and helps to keep cycle times predictable, making the blade a reliable choice for workshops seeking to balance longevity with consistent results.

Reduced vibration and cleaner profile cuts

A variable tooth pitch offers a direct benefit when sawing slender profiles or performing tube cuts prone to vibration. The alternating spacing of the teeth disperses harmonic frequencies, resulting in reduced vibration and a cleaner kerf. The 14–18 tpi range is particularly effective for thin‑walled profiles and moderate‑thickness tubing when used with a 0° rake setting, helping to prevent chatter and produce more accurate sections without compromising blade stability.

High cutting performance where it is needed

For demanding materials such as tool steels or when higher removal rates are required, the blade’s available smaller pitch options with a positive rake increase cutting aggressiveness and material evacuation. This configuration yields high cutting performance and shorter cycle times on tougher workpieces while still maintaining reasonable surface finish. Understanding rake angles and matching tooth pitch to the workpiece hardness enables improved throughput with fewer passes, and therefore a higher overall machine utilisation.

Selecting and maintaining the blade for long life

Correct tooth pitch selection and basic maintenance extend blade life significantly. Use coarser pitches for thicker sections and solid materials, and finer pitches for thin sheets and non‑ferrous metals. Maintain proper blade tension, keep guides aligned and ensure adequate coolant application for abrasive or stainless materials. The TECWERK metal bandsaw blade benefits from controlled feed rates and stable mounting; these practices reduce heat build‑up and tooth wear, preserving cutting performance and reducing replacement frequency.

For projects demanding durable, flexible blade performance, contact Metav Werkzeuge for tailored guidance on TECWERK HSS M42 bandsaw blades and to arrange supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 2000814022NW
• Type: Metal bandsaw blade
• Manufacturer: TECWERK

Facts

• Length: 1,140 mm
• Width: 13 mm
• Thickness: 0.51 mm
• Teeth per inch: 14–18 tpi
• Pack size: 5

Special features

• Material: HSS M42 bimetal
• Tooth pitch: variable
• Recommended cuts: profiles, tubes, solid material
• Recommended materials: steel, tool steel, stainless steel, non‑ferrous metals

FAQ

What materials can this bandsaw blade cut?
The TECWERK metal bandsaw blade in HSS M42 quality is suitable for steels, tool steels, stainless steels and non‑ferrous metals as well as profiles and solid material.

Which tooth pitch is recommended for vibration‑prone profile cuts?
For vibration‑prone profile and tube cuts, the variable 14–18 tpi configuration with a 0° rake is recommended for the TECWERK bandsaw blade to reduce chatter and improve surface quality.

Can the blade handle high removal rates on hard materials?
Yes; the blade’s finer pitch options with a positive rake are designed to increase removal rates and deliver high cutting performance on harder steels while maintaining tool integrity.

How should the blade be maintained to prolong its service life?
Maintain correct tension, keep guides aligned, apply suitable coolant and match tooth pitch to material; these measures help the TECWERK HSS M42 bandsaw blade sustain cutting performance and extend blade life.

Is this blade compatible with standard industrial bandsaws?
The blade fits standard bandsaw machines that accommodate a 1,140 mm blade length and 13 mm width; correct tensioning and guide setup are essential for optimal performance with the TECWERK blade.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund