1440mm Metal Bandsaw Blade HSS M42 Bimetal Variable 8-12 TPI 0.65mm 13mm - TECWERK

Take advantage of the combination of wear-resistant HSS M42 bimetal construction and a variable tooth pitch (8–12 TPI) for consistent, vibration-tolerant cutting across a wide range of metals; order directly via Metav Werkzeuge or contact the consultants for specification guidance.

TECWERK metal bandsaw blade 1440 x 13 x 0.65 mm – HSS M42, 8–12 TPI

The TECWERK metal bandsaw blade 1440 x 13 x 0.65 mm is a high-wear bimetal cutting blade designed for versatile sawing tasks in construction, tool and stainless steels, non-ferrous metals, profiles and tubes.

High-wear HSS M42 bimetal construction
Variable tooth pitch, 8–12 TPI
Dimensions 1440 x 13 x 0.65 mm
Suited to profile and tube cutting

Reliable cutting performance for mixed-metal production

The HSS M42 bimetal composition provides a hard, wear-resistant cutting edge welded to a flexible backing, delivering both durability and the resilience required for industrial use. This design reduces tooth breakage and extends service life compared with standard carbon blades, which translates into fewer blade changes and improved machine uptime. The specified 1440 x 13 x 0.65 mm dimensions make the blade suitable for many standard bandsaw frames, ensuring straightforward replacement and consistent blade tracking.

Variable tooth pitch for adaptable feeds and finishes

The blade’s variable tooth pitch (notably 8–12 TPI) combines coarse and fine tooth spacing along the cutting edge to balance chip clearance and finish. This arrangement reduces chatter in vibration-prone operations and is particularly effective when alternating between thicker sections and thin-walled profiles. For demanding throughput, the manufacturer recommends specific pitches (e.g., 5/8, 6/10, 8/12, 10/14, 14/18 at a 0° rake) to match material type and wall thickness; selecting the correct pitch improves cut quality and cycle consistency.

Engineered for demanding materials and tricky geometries

The bimetal edge, produced in HSS M42 quality, is suitable for a broad material spectrum—from mild and alloy steels to tool steels and stainless variants—while also coping with non-ferrous metals and solid stock. The combination of a wear-resistant tooth tip and a tougher backing strip allows reliable performance on profile and tube cutting of small to medium wall thicknesses. In operations where vibration is a concern, the mixed tooth spacing helps maintain a stable cutting action and reduces the risk of premature tooth wear.

Practical guidance for selection and use

When fitting the blade, ensure correct tension and alignment for optimal life and cut quality. The blade’s recommendation for positive or neutral rake angles should be applied according to the workpiece: pitches such as 3/4 and 4/6 with a positive rake are aimed at high material removal rates in tougher steels, while neutral 0° rake setups suit general-purpose cutting and vibration-sensitive tasks. Regular inspection for tooth wear and backing deformation will prevent unexpected failures and keep throughput steady.

Discuss application specifics and stocking options with Metav Werkzeuge for tailored supply and fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 2000814025NW
• Label: Metallsägeband 1440x13x0,65mm HSS M42 ZpZ 8-12 TECWERK
• Product type: Metal bandsaw blade
• Manufacturer: TECWERK

Facts

• Length: 1440 mm
• Width: 13 mm
• Thickness: 0.65 mm
• Teeth per inch: 8–12 TPI
• Packaging unit: 5

Special features

• Material: HSS M42 bimetal
• Tooth pitch: variable tooth pitch
• Recommended tooth pitches: 5/8, 6/10, 8/12, 10/14, 14/18 at 0° rake angle
• Applications: vibration-prone sawing, profile and tube cuts (small–medium wall thickness)
• Performance tips: pitches 3/4 and 4/6 with positive rake for high removal rates

FAQ

What materials can this bandsaw blade cut effectively?
The TECWERK metal bandsaw blade in HSS M42 bimetal quality is suitable for construction steels, tool steels, stainless steels, non-ferrous metals and solid stock, as indicated by its wear-resistant composition.

How does the variable tooth pitch affect cut quality?
Variable tooth pitch reduces vibration and improves chip evacuation; the 8–12 TPI section of the blade balances surface finish and cutting speed for mixed-section workpieces.

Which tooth pitch should be chosen for thin-walled tubes?
For profile and tube cutting of smaller to medium wall thicknesses, the neutral pitches (for example 8/12 or 10/14 at 0° rake) recommended with this blade offer stable cutting and good finish.

Is the blade suitable for high-volume production runs?
The HSS M42 bimetal construction provides enhanced wear resistance and fatigue strength, making the blade well suited to continuous production, especially where mixed materials are processed.

How is the blade identified for reordering?
Reorder using the article number 2000814025NW and specify the TECWERK metal bandsaw blade, HSS M42, 1440 x 13 x 0.65 mm to ensure the correct item is supplied.

Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund