5mm Solid Carbide End Mill TiAlN Coated 4-Flute 16mm Cut Length DIN 6527 K - TECWERK

Benefit from a robust solid carbide construction, TiAlN surface protection and a short, rigid form that delivers stable high-performance milling for both roughing and finishing; order the TECWERK end mill directly via Metav Werkzeuge or consult our specialists for application advice.

TECWERK Solid Carbide End Mill DIN 6527K — 5 mm, TiAlN, 4‑flute, HPC

The TECWERK Solid Carbide End Mill DIN 6527K is a short, high-performance four‑flute cutter designed for vibration‑reduced roughing and finishing across steels, cast materials and non‑ferrous alloys.

TiAlN coating for heat resistance
Solid carbide, fine-grain for rigidity
4 flutes with centre-cut for plunging
5 mm diameter, 16 mm effective length

Stable performance in demanding materials

The combination of solid carbide construction and a TiAlN surface treatment provides enhanced thermal stability and abrasion resistance under elevated cutting temperatures. Developed for HPC (high‑performance cutting), this cutter is very well suited for steel, cast iron, stainless steel and a range of non‑ferrous and special alloys. The engineered substrate and coating reduce flank wear during sustained removal rates, which helps achieve consistent component quality and predictable maintenance intervals.

Geometry engineered to reduce chatter and rework

A 4‑flute layout combined with an unequal helix reduces harmonic excitation and improves chip evacuation, while the centre‑cut geometry allows controlled plunging operations without compromising tool life. The 45° chamfer protects the cutting edges against premature chipping and supports smooth engagement when entering the workpiece. In practice, this means fewer rejected parts and shorter rework cycles for mixed production batches.

Compact dimensions for secure clamping and rigidity

With a 5 mm cutting diameter, 16 mm effective cutting length and 54 mm overall length, the tool offers a compact profile that increases stiffness at the cutting point. The 6 mm cylindrical shank conforms to DIN 6535 HB with an h6 tolerance, enabling reliable clamping in standard collets and toolholders. This compact, rigid design supports tighter tolerances and improved surface finishes in short‑span milling tasks.

Longer life, consistent finishes and efficient cycle times

The fine‑grain carbide body paired with TiAlN treatment extends the tool life under challenging feeds and speeds, while the combination of geometry and neck relief contributes to low vibration machining. For shops seeking to reduce cycle times without sacrificing surface quality, this cutter delivers stable results in both roughing and finishing passes. The tool’s suitability for high‑speed conditions helps to maximise throughput on CNC centres equipped for HPC strategies.

For dependable high‑performance milling choose the TECWERK solution via Metav Werkzeuge — contact Metav Werkzeuge for technical recommendations or to discuss the best variant for a specific application at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 2000866335NW
• SKU: 2000866335NW
• Product type: Solid carbide end mill
• Standard: DIN 6527
• Brand: TECWERK
• Coating: TiAlN
• Material: VHM (solid carbide)

Facts

• Diameter: 5 mm
• Number of flutes: 4
• Cutting length: 4 mm
• Effective length: 16 mm
• Overall length: 54 mm
• Shank diameter: 6 mm
• Shank tolerance: h6
• Protective chamfer: 0.07 mm

Special features

• DIN 6527 K · Type N / HPC
• VHM · Universal fine‑grain carbide · TiAlN coated
• Centre cutting for plunging
• Unequal helix for vibration reduction
• 45° protective chamfer
• Neck relief for low‑vibration machining
• Short design for maximum rigidity
• Right‑hand cutting
• Cylindrical shank to DIN 6535 HB
• Suitable for roughing and finishing
• Material suitability: steel, cast iron, grey cast iron, malleable cast iron, Cr‑Ni steels, non‑ferrous metals, aluminium with silicon content, abrasive materials, special alloys, stainless steel

FAQ

Can this cutter be used for plunge milling?
Yes. The cutter features a centre‑cut geometry that enables controlled plunge milling; the TECWERK solid carbide end mill (SKU 2000866335NW) is designed for such operations.

Which materials is the cutter best suited for?
The cutter is very well suited for steel, cast materials, stainless steel, non‑ferrous metals, aluminium with silicon, abrasive materials and various special alloys, providing flexibility across common workshop needs.

What benefits does the TiAlN coating deliver?
The TiAlN coating increases heat and oxidation resistance at the cutting edge, improving wear performance during high‑temperature cutting and extending the tool life under HPC conditions.

What shank size and holder compatibility should be used?
The tool has a 6 mm cylindrical shank to DIN 6535 HB with h6 tolerance, compatible with standard ER collets and toolholders that accept a 6 mm shank for secure clamping.

Is the cutter suitable for high‑speed machining and finishing?
Yes. The fine‑grain solid carbide substrate, TiAlN coating and stabilising geometry make the cutter suitable for high‑speed applications and both roughing and finishing tasks, delivering consistent surface quality.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund