16mm Solid Carbide End Mill DIN 844 Type N 4-Flute Short 4mm Cutting Length Right-Hand - TECWERK

Take advantage of the combination of durable HSS‑Co8 construction, short centre‑cutting geometry and a secure Weldon shank for reliable milling performance; order the TECWERK cutter directly via Metav Werkzeuge or consult our specialists for application advice.

End Mill DIN 844 Type N D16 mm HSS‑Co8, 4‑flute short – TECWERK

The End Mill DIN 844 Type N D16 mm HSS‑Co8 is a short, four‑flute, centre‑cutting cutter designed for precise milling of steels and cast iron in industrial and workshop environments, suitable for both finishing and plunge operations.

• HSS‑Co8 construction for increased toughness
• Four‑flute design for smooth chip evacuation
• Weldon shank with drive flat for secure clamping
• Short centre‑cutting geometry for plunge milling

High‑performance material and standard compliance for consistent results

The cutter is manufactured in HSS‑Co8, a cobalt‑alloyed high‑speed steel that increases heat resistance and edge life compared with standard high‑speed steels. Conforming to DIN 844 ensures a recognised geometry and dimensional consistency across batches. The four‑flute configuration reduces axial run‑out while supporting higher feed rates and improved surface finish on interrupted cuts. With a 16 mm diameter, an overall length of 92 mm and an effective length of 42 mm, the tool balances rigidity and usable reach for a wide range of milling tasks.

Compact design and clamping for rigid, repeatable milling

The short design and centre‑cutting geometry enable secure plunge cuts as well as conventional side milling, while the Weldon shank with drive flat provides dependable torque transmission in standard holders. A cutting length of 4 mm and a relief/grind value of 15 mm contribute to stable chip control and reduced vibration when machining at moderate depths. Right‑hand cutting direction offers conventional chip flow for most setups. These design choices translate into predictable tool life and fewer interruptions for regrinding or replacement.

Practical suitability and economic advantages for workshops

This end mill is optimised for machining materials of low to medium strength up to approx. 800 N/mm² with an uncoated tool and up to 1,000 N/mm² when a coated version is used, making it very well suited for steel and cast iron; non‑ferrous metals and stainless steel are conditionally suitable depending on application. For workshops and production lines the result is improved uptime, reduced tool inventory complexity and consistent part quality. The combination of material choice, standardised geometry and secure shank design supports efficient workflows across jobbing shops, maintenance departments and small series production.

For precision milling tasks, choose the TECWERK HSS‑Co8 short end mill for robust, high‑performance results and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930

Technical Data

• Article number: 2000866338NW
• Manufacturer: TECWERK
• Standard: DIN 844

Key figures

• Diameter: 16 mm
• Overall length: 92 mm
• Cutting length: 4 mm
• Effective length: 42 mm
• Shank diameter: 16 mm
• Number of flutes: 4

Special features

• HSS‑Co (cobalt‑alloyed high‑speed steel)
• Type N, four‑flute, centre‑cutting
• Weldon shank (cylindrical shank with drive flat)
• Right‑hand cutting
• Short design for plunge capability
• Suitable for steel: very well suited
• Suitable for cast iron: very well suited
• Suitable for non‑ferrous metals: conditionally suitable
• Suitable for stainless steel: conditionally suitable
• Uncoated tool: up to approx. 800 N/mm²; coated: up to approx. 1,000 N/mm²

FAQ

Is this cutter suitable for plunge milling?
The TECWERK end mill DIN 844 Type N (SKU 2000866338NW) features a centre‑cutting geometry, which permits controlled plunge milling as well as standard side milling.

Which materials can this tool machine effectively?
The tool is very well suited for steel and cast iron; non‑ferrous metals and stainless steel are conditionally suitable depending on cutting parameters and workpiece hardness.

What advantages does the Weldon shank provide?
The Weldon shank with drive flat ensures secure clamping and reliable torque transmission in Weldon holders or compatible toolholders, improving repeatability and reducing slippage.

Is the tool supplied with a coating?
The specified SKU is uncoated; a coated variant can raise the usable hardness range to approx. 1,000 N/mm², improving wear resistance in demanding applications.

What are the key dimensions to consider for setup?
Important setup figures are 16 mm diameter, 92 mm overall length, 42 mm effective length and a 4 mm cutting length; these define reach, rigidity and permissible depth of cut.

Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund